Body press, straightening set
-Manufacturer: DEMA / Europrotec
-Delivery as is as seen
-Corner support plate broken off
-10 t pump with pressure cylinder
-various accessories
Bjdly8ts3s
-Metal case
-Dimension 710/285 / H160 mm
-Weight 31 kg
Body press, straightening set
Nm0zn
-Manufacturer: DEMA/Europrotec
-Pump: 10 t with pressure cylinder
-various accessories
-Metal case
-Dimensions: 710/280/H155 mm
-Weight: 31 kg
pressure:400 t
distance between columns:1100 mm
2wdpz2jj
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
Spindle Press Krause KgS
Year - Serial-No. KgS
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Jiciqnz
-On Stock Emskirchen / Nürnberg - Can be test-
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
50 mm
Tlvmt3hi
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
pressure 15 t
stroke 160 mm
press capacity 147,15 kn
Pressure power 382,2 bar
column daylight 555 mm
80
tank capacity 1,5 l
distance between columns 134 mm
weight of the machine ca. 134 kg
dimensions of the machine ca. 825 x 600 x 1880 mm
Vy2xfohj
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
Fg9qx9eb3
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in...
Spindel Press Krause
Eoaxjnybs
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Table size 2500 x 1300 mm
Total thrust 70 Ton
Stroke – total opening 400 mm
N. 4 of cylinders
Pistons D 70 mm
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/cm2
Heating medium pressure 2,5 bar, it is composed by:
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
Vqos9i
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
K) Flat gauged steel plate, only f...
Cold press for engineering parquet
250mm wide
2600mm long
2 pozition
Capacity up to 1000m2 per 8 hour
16 cilinder x 92mm diameter
150 ton total presure
Euubpdoau
5.5kw hydraulic pump
pressure 50 t
490,5 kN
Pressure power 399,5 bar
140 mm
working width 1100 mm
Dimensions (HxWxD) 2050 x 760x 1100 mm
Bjtom0pnpl
column daylight 750 mm
distance between columns 300 mm
piston stroke 160 mm
weight of the machine ca. 309 kg
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
Ykguo
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing)...
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
Fe7ib0b
power capacity:55,0 kW
weight:50,0 t
die c...
⢠Minimal footprint
⢠Height continuously adjustable
Bjfhulirbn
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
pressure 100 t
stroke 380 mm
Gvufe0
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Cold Press CP 250/3800
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 3840 mm
• Max gluing height - 900 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 24 pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl.; 4 cycles x 2 cyl.
• No of independent pressing cycles - 8
• Pitch between pressing cylinders - 320 mm
• Each cylinder has its own s...
pressure 30 t
stroke 160 mm
table surface area 560 x 255 mm
table length 695 mm
table width 230 mm
Pressure power 374,6 bar
piston stroke 160 mm
tank capacity 1,5 l
column daylight 560 mm
Fhjpujh2k
diameter of piston 110 mm
weight of the machine ca. 175 t
dimensions of the machine ca. 830 x 640 x 2030 m
In this offer you buy a used colour production system "Minolta Bizhub Press C1100
Object of sale:
1 x Minolta Bizhub Press C1100 with the following equipment:
incl. PB-503 adhesive binder
incl. PF-707 large capacity magazine with suction feeder for up to 3x 3,240 sheets up to A3 oversize (RRP 11,742.00€)
incl. RU-511 cooling/smoothing unit (RRP 6.901,00€)
incl. HM-101 remoistening unit (RRP 7.365,00€)
incl. IC-308 External EFI Fiery PRO80-25 print controller
counter rea...
Good working condition
Manufactured in Romania
YOM: 1986
Mechanical
Brg0g2i9k7
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Ram stroke: 310mm
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Total weight: 108009kg
Cutting length: mm 3100
Cutting thickness: mm 4
Recess: mm 500
Bmc9kvfx0x
Steel basement supports sheet metal.
Motorized rear register.
NEW MAPER programmer for rear register stroke visualization.
Cutting angle adjustment.
Cutting blade stroke adjustment.
Sheet-metal support brackets supplied.
pressure 50 t
stroke 250 mm
throat 265 mm
Beojfhitbb
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
weight of the machine ca. 1,7 t
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
C8ten7xxm
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited...
pressure 100 t
stroke 380 mm
tank capacity 54 l
pressing speed 2,47 mm/sec
column daylight 1500 mm
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Pressure power 258 bar
engine output 2,2 kW
speeds: 2
220 mm
range L-W-H 2065 x 865 x 2080 mm
Bh0o707u
weight of the machine ca. 1145 kg
In this offer you will purchase a used color production system "Xerox Versant 80 Press "
Item for sale:
1 x Xerox Versant 80 Press with the following equipment:
incl. Staple Finisher A-Fn07
Stzc28
incl. Paperdeck A-CF-1
incl. Fiery E200-08
Meter readings:
Total: Approx. 730,183 pages
Color: Approx. 263,720 pages
Black: Approx. 466,463 pages
Condition:
This is a used unit and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing) may show.
...
Good working condition
Manufactured in Romania
YOM: 1986
Hydraulic
Ram stroke: 700mm
Brgz07z8jv
Nominal working pressure: 320 bar
Working direction: Up to Down
Work surface: 2000mm x 2400mm
Fast approach speed: 200mm/sec
Working speed: max.50mm/sec
Return speed: 250mm/sec
Maximum height from the ground: 8000mm
Weight: 120000Kg
Strippit single station non cnc punch press
With plenty of tooling
TONNAGE …………….. 30 TON
THROAT DEPTH …………… 30″
MAXIMUM HOLE DIAMETER …………… 3.5″ DIA. IN 12 GA.
MAXIMUM MATERIAL THICKNESS …………. 1″ DIA. IN .250
TABLE SIZE …………….. 72″ W X 48″ D
Ocs3x
SHEET SIZE …………….. 30″ X 30″
STROKE LENGTH …………….. 5/8″
HITS PER MINUTE …………… 165
MOTOR ……………. 1 HP
WEIGHT …………… 3,000 KGS
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
Dv7r7m
You buy a hanger system
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
BJ 23.10.2002
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
Dimensions:
2750x1700mm
T-nut plate: 2440x1520x230mm
L3bigh2g
pressure 160 t
stroke 400 mm
tank capacity 51 l
pressing speed 2,40 mm/sec
column daylight 1500 mm
feed speeds 7,48 mm/sec
return speed 9,35 mm/sec
Pressure power 255 bar
engine output 3,0 kW
speeds: 2
Bhz22pvs
280 mm
range L-W-H 2125 x 935 x 2270 mm
weight of the machine ca. 1430 kg
1 x Xerox 700 Digital Colour Press included
- Fiery Controller E10-02
- Booklet finisher JGW-1 + feeding unit
Betdf78fn2
Counter reading: Total approx. 2,017,686, thereof color 1,605,360, SW approx. 412,326
Features:
- 71 DIN A4 pages / minute B/W
- 71 DIN A4 pages / minute Colour
- Paper formats: DIN A5 - DIN A3
- Grammages: 64 - 300 g/m²
- Cassette: Max. 5,900 sheets
Manufacturer information:
The ideal solution for digital production printing
The Xerox 700 Digital Color Press opens up pr...
frame hydraulic press WEGOMA
Workspace: width 3600 mm height 2500 mm
Dgjnj29
the amount of lateral hydraulic cylinders 3
pieces top two pieces beam mechanically Move
Mechanical compression setting
more photos an questions
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
Eccentric press Make V & O Press Type FO 43 built 1980
Serial number 25ST-593 Pressing force approx. 25 tons
Bkjhd8j3zf
Laenge: About 2430 mm
Width: About 1520 mm
Hpxmute
Heithrange: About 540 mm
pressure 30 t
stroke 380 mm
tank capacity 51 l
Nlmbz
column daylight 750 mm
feed speeds 15 mm/sec
return speed 18,11 mm/sec
turning speeds 3000 U/min
Pressure power 221 bar
engine output 1,5 kW
speeds: 2
130 mm
weight of the machine ca. 385 kg
dimensions of the machine ca. 2120 x 695 x 1315 mm
In this offer you acquire a used colour production system "Xerox 700 Digital Colour Press ".
Item for sale:
1 x Xerox 700 Digital Colour Press with the following equipment:
-incl. Fiery E10-02
Meter readings:
Total: Approx. 5,683,450 pages
Nvvkl
Colour: Approx. 3,679,705 pages
Black: Approx. 2,003,745 pages
Consumables:
Drum Unit BK: 85%
Drum Unit C: 99
Drum Unit M: 71%
Drum Unit Y: 71%
Condition:
This is a used unit and may show signs of use (minor scratches or yell...
Press design MBM TYPE B27-1 for coffins
mounting press-coffin funeral press obekasten
Nlymtyt0u
Dimensions: 2740x1700x220mm
Beya8omnph
pressure 60 t
stroke 380 mm
tank capacity 51 l
pressing speed 2,07 mm/sec
column daylight 750 mm
Benmyrxrny
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Pressure power 259 bar
engine output 1,5 kW
speeds: 2
170 mm
weight of the machine ca. 540 kg
dimensions of the machine ca. 2120 x 695 x 1315 mm
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used machine and may show signs of use (minor scratches...
Press the door lignum-EVERT JOHANSON TPBH 2300X1300
Press bonding framework of internal and external doors "
Companies Lignum-Evert Johanson
--- pneumatic-hydraulic press
bonding size maximum dimensions: Length 2330 mm Width 1330 mm
T20yo98un
adjustable working pressure and the size of the door bonded
hardware give one year warranty