Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. Klolhcofn Tu Tscqnsw (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm Klelhccofn Tvheqnjw ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Klslhefn Tvieccqnew Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Klolhcodf Ufdocqnsw Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options! Kljlhjdf Ud Sjccqnow

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors Klelhcedf Ufpscqnjw A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: new, Hydraulic winch HAW4000 with electric valve for wheel loaders, excavators, cranes, mini-excavators, tractors in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many applications. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on logging cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They need to be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the steel rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Kelhofn Tvkoccqnolw Please contact us; we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg Kolhccqjupiapjnslw

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. Klolhccjuph Uxeqnew - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Kljlhccqodf R Rqsnew Item No.: MT18-EB-400-1000

Year of construction: 2020, condition: new, The root cutter is equipped with 9 hardened, reversible cutting inserts that can be rotated multiple times when they become dull. The inserts have a long service life. There are inserts with 3 different cutting edge angles to optimally process different types of wood. You can also use the cutter to mill out flower boxes or perform other milling operations. Ksljdf Sd Sshccqnjlw Article number: MT18-WF300

Year of construction: 2022, condition: new, The carrier unit allows the operation of a wide range of equipment, such as cone splitters, earth augers, root grinders, sweepers, rotary harrows, and much more. The equipment is developed and manufactured in Germany. Very robust roller bearings ensure that the forces are safely absorbed in both axial and radial directions. A large, high-performance hydraulic motor, type HMT500, provides the necessary torque for powerful and efficient operation, with up to 1600 Nm. Oil flow rate up to 125 l/min, pressure up to 210 bar, and speed of 240 rpm. Article no.: MTT500 Earth augers, drill cones, and other tools are available on request for an additional charge. Kljlhcedf Sgrocqnjw Quick-change mounts MS 01 - MS03 - MS08 or other adapters are also available on request and for an additional charge.

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Kolhjyl S S Ueccqnslw

Condition: new, Year of construction: 2025, power: 71 kW (96.53 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * incl. STOLL Solid 38-20 front loader * enclosed cabin * air conditioning * all-wheel drive * rear power lift * rear hydraulics * front hydraulics * creeper gear * FARMotion 4-cylinder diesel engine * 5-speed manual transmission ----* work lights * height-adjustable drawbar * compressed air connections for trailer operation ----* tire dimension front axle: 480/65R24 * tire dimension rear axle: 540/65R34 * fuel tank: 100 liters * AdBlue tank: 15 liters * technical total weight: 6500 kg * unladen weight: 4360 kg * permissible trailer load: 28000 kg * overall length: 4240 - 4275 mm * wheelbase: 2350 mm -----Vehicle number: 11938----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle delivery, vehicle registration, recoveries and vehicle transport.----YOUR VTS TEAM Klolhccqoyvnw Aenew

Condition: used, Year of construction: 1991, operating hours: 648 h, power: 14 kW (19.03 HP), Equipment: ABS, all wheel drive, cabin, front linkage, John Deere 670 Farm Tractor * Continuously variable rear PTO * Front lift * Front hydraulics * Rear lift * Switchable all-wheel drive * Pivoting snowplow Technical data: * Engine: Yanmar 3-cylinder diesel * Power: 14.4 kW * Displacement: 0.9 l * Weight: approx. 843 kg Kelhey Skl Ueccqnolw * Maximum speed: approx. 16.7 km/h * Front tires: 6-12 * Rear tires: 9.5-16 * Dimensions (length): approx. 2.76 m Special features: * Compact design * Fuel-efficient and durable Yanmar engine * Versatile (farmyard, stable, green areas) ----Vehicle number: 12033----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport YOUR VTS TEAM

Condition: used, Year of construction: 2000, power: 157 kW (213.46 HP), Equipment: all wheel drive, cabin, More data and images will follow! Klelhccow Nfb Rsqnjw More photos and details coming soon! -----Internal vehicle number: 12255 Errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 3,200 h, power: 232 kW (315.43 HP), next inspection (TÜV): 09/2024, Equipment: air conditioning, all wheel drive, cabin, front linkage, * Deutz-Fahr 9340 TTV * First registration: April 29, 2016 * Year of manufacture: 2016 * Operating hours: 3,184 h * Electrically adjustable and heated mirrors * Automatic climate control * LED work lights * 60 km/h top speed * Performance Steering ready with ''EASY-STEER'' function * Upper link CAT III for front hitch with automatic locking device * External operation for front hitch with 7-pole and 3-pole front socket * Load-Sensing with 210 l/min * Additional electric control unit at the rear with 2x double-acting valve connections * Suspended and braked front axle * ISOBUS preparation * i-Monitor 2 12'' screen with color camera * K80 ball hitch -----Internal vehicle number: 9251----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp German, English -- WhatsApp German, English, Arabic Klolhcjvht Hnecqnjw

Condition: used, Year of construction: 1988, operating hours: 10,600 h, power: 66 kW (89.73 HP), next inspection (TÜV): 06/2027, Equipment: all wheel drive, cabin, front linkage, Mercedes Benz MB-Trac 900 turbo, vintage vehicle with front loader and 3-meter flail mower Tractor * Tractor * Towing vehicle * Vintage vehicle * COLLECTOR'S ITEM * Digital speedometer * Year of manufacture: 1988 * Date of first registration: 13.10.1988 * Next inspection: 03.2027 * Model series: WDB 440.173 * Gross vehicle weight: 6500 kg * Unladen weight: 3980 kg * Overall dimensions: 4150 mm x 2140 mm x 2810 mm * 40 km/h * Engine: OM 364 A * Diesel * 66 kW / 2400 rpm * 3944 cm³ displacement Klolhcoxtdigjcqnow * Cabin * Radio * New tires 16.9-24 * Errors/input errors and prior sale reserved. Location and viewing of our vehicles: * STX HORSETRUCKS GERMANY, Hamburgerstrasse 65, 23816 Leezen * Service for all brands in the field of horse transporters and trailers, motorhomes * Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: new, Year of construction: 2025, power: 37 kW (50.31 HP), _____Schäffer loader, type 3650, with ROPS operator protection cab Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp Rear weight end plate, high speed gear 20 km/h, hydraulic tool locking, retention system with operating manual Special equipment: Lugged weight 100 kg Hydraulic connections with quick-release couplings Lighting system TÜV certificate for working machinery, self-propelled < 25 km/h (lighting system according to StVZO required) Set of work lights, LED, 800 lumens (2 at the front and 1 at the rear) Towing device with pin and lashing eyes Tires 15.0/55-17 AS, 6-hole rim, offset -45 Kloljx Evdvjhccqnew Attachment frame Euro-WS, hydraulic locking Location: null

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 930 h, fuel type: diesel, maximum speed: 40 km/h, color: green, For Sale: Claas Arion 610 Hexashift Stage V (CIS) Agricultural Tractor, Type A96 100 Year of manufacture: 2022 Operating hours: 939 hours The tractor is in excellent, like-new condition, has seen very little use, is fully operational, and is ready to work with no additional investment required. It is powered by a 6-cylinder John Deere DPS 6.8 L engine compliant with Stage V emissions standards (SCR, DPF, DOC, AdBlue). Maximum power: 145 HP Rated power: 135 HP Homologated power: 139 HP The tractor is equipped with a Hexashift 24/24 transmission (without creeper gears), featuring an electro-hydraulic shuttle and automatic powershift gear changes. Maximum speed is 40 km/h. It has 4WD, a differential lock, and a PROACTIV suspended front axle. The Load Sensing hydraulic system delivers 110 l/min and includes four rear hydraulic remotes (2 mechanical, 2 electro-hydraulic). Rear Category III three-point linkage and PTO speeds: 540 / 540 ECO / 1000 / 1000 ECO. The tractor does not have a front PTO. It is fitted with a Claas front linkage (front hitch) with a 3.0-ton lifting capacity and suspension. A reinforced loader frame is installed. The tractor comes with an ALO Quicke Q6M front loader featuring suspension, a quick coupler, Euro hitch, a bucket, and pallet forks. The cab is suspended and equipped with air conditioning, a pneumatic driver's seat, a CIS terminal with a color display, Bluetooth radio with hands-free function, and a full set of work lights. Standard roof (without sunroof). Klslhccszmv Twsqnsw Tyres: Front: 480/70 R28 Mitas Rear: 580/70 R38 Mitas Both front and rear tyres are in very good condition. The tractor can be inspected and collected in Germany by prior appointment.

Condition: used, Year of construction: 2021, gearing type: other, fuel type: diesel, first registration: 01/2021, mileage: 1,001 km, empty load weight: 820 kg, driver cabin: other, Vehicle location: en route / in transit. Type: Generator unit, model number: 69UG15-050S-55 Generator unit with a continuous power output of 15 kW. Kljlhozmu Tpsccqnjw Operating hours: approx. 660 hours. All information is provided without guarantee, as the generator unit is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2021, gearing type: other, fuel type: diesel, first registration: 01/2021, mileage: 1,001 km, empty load weight: 820 kg, driver cabin: other, Vehicle location: en route / in transit. Type: Generator unit, model number: 69UG15-050S-55. Generator unit with a continuous power output of 15 kW. Operating hours: approx. 1,307 hours. Kelhccqozmu Tienjlw All information is provided without warranty, as the generator unit is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT WARRANTY; subject to change, prior sale, and errors.

Condition: used, Year of construction: 2021, gearing type: other, fuel type: diesel, first registration: 01/2021, mileage: 1,001 km, empty load weight: 820 kg, driver cabin: other, Vehicle location: en route / in transit Body: Undermount generator set, model number: 69UG15-050S-55 Klslhezmu Tvsccqnsw Undermount generator set with 15 kW continuous power output Operating hours: approx. 1034 h All information is provided without guarantee, as the generator set is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, working width: 6,000 mm, color: other, total width: 600 mm, Working width: 600 mm Kelhccqozmukhenjlw Scarifying unit with spring-loaded tines Online auction of construction, agricultural and industrial machinery (including. mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders and skid steer loaders, aerial platforms, trucks, mobile compressors, power generators, rollers, scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 8 July and closes Wednesday 22 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 July Pickup days are on: - Tuesday 28 July - Thursday 30 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2025, working width: 25,000 mm, color: other, total height: 1,620 mm, total length: 1,800 mm, total width: 3,000 mm, Empty weight: 950 kg Serial number: 250104 Working width: 2500 mm Maximum working depth: 600 mm Number of blades: 4 Distance between blades: 730 mm Tire size: 185/65-15 NHS Equipped with: 3-point hitch, 4 support legs Dimensions: 1800x3000x1620 mm Kjlhcszmuf Sscqnolw Weight: 950 kg Condition: unused Online auction of construction, agricultural and industrial machinery (including. mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders and skid steer loaders, aerial platforms, trucks, mobile compressors, power generators, rollers, scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 8 July and closes Wednesday 22 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 July Pickup days are on: - Tuesday 28 July - Thursday 30 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.