Used Mechanical Press for sale (18,055)

Condition: used, Year of construction: 2002, machine/vehicle number: 1620, functionality: fully functional, pressing force: 9,500 t, table width: 500 mm, table length: 1,150 mm, DMS 40 Mechanical Press 400 kN Blsdpfjz Tzyzex Aknop 25 strokes per minute Max capacity 9500 kg Max die dimensions 1150x500 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener. Bljdpfx Asu D Dhxsknep

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Bedpfxex R U Nuo Aknelp Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Quantity: 4 units Machine type: Mechanical stamping presses Manufacturer: Predominantly Berg & Schmid (?) MACHINE DETAILS Dimensions Bjdo Adu Ekspfx Aknjlp Length: 300 mm Width: 200 mm Height: 300 mm Weight Weight: 20 kg

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch Blsdpfx Asyc R Uioknep CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] Bljdpfjuhahmox Aknop - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] Bljdpfxjuhahgj Aknsp - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : Bjdpfxsuhakbs Aknelp * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] - Number of punches : from 50 to 150 [p/min] - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm]

Condition: used, Manzoni 60-ton high-speed press, 110/308 strokes per minute. Used – Great Deal. Bledjkn Hqgopfx Aknjp

Condition: used, pressure 1000 t distance between columns . mm stroke . mm total power requirement . kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bsdpfozk Rcuox Aknslp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: 1493, functionality: fully functional, power: 150 kW (203.94 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 1,000 t, stroke length: 500 mm, table width: 1,500 mm, table length: 4,600 mm, distance table to ram: 804 mm, overall weight: 347,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Mechanical arch press with 2 connecting rods and a large 4700 mm table, 4 stations. The machine is in perfect condition and complete, including a feeding and uncoiling line, as well as its associated tooling. The press is still installed at its former production site. Bjdpfs Ahywtjx Aknjlp Contact us for more information. Price upon request.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Bsdpfx Akou Nfinsnelp Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Manzoni 40-ton high-speed press, stroke rate 150/300. Used – bargain. Bodpfx Akskn Hk Tenslp

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Year of manufacture 1858. Can be used as a work machine or as a museum exhibit. Bljdjz N Shbjpfx Aknsp

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm Bodpsym D E Ajfx Aknelp stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Blsdpfx As Aa Ndyeknjp Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) Blsdpoxacifofx Aknsp - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Bedpfxsz Sqiis Aknslp Stamping Force 5000 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm Bledpsz Sqf Rjfx Aknop • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm Bledpfxjcxxpcj Aknjp throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, TECHNICAL DETAILS Bodjuhaknspfx Aknslp - See photos

Condition: used, TECHNICAL DETAILS - See photos Bjdpfxouhakhj Aknslp

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele Bledpfxjfim Tho Aknjp - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: excellent (used), functionality: fully functional, power: 45 kW (61.18 HP), pressing force: 630 t, stroke length: 160 mm, table width: 1,000 mm, table length: 2,000 mm, table height: 190 mm, distance table to ram: 650 mm, clearance between the columns: 2,300 mm, overall weight: 68,000 kg, Equipment: CE marking, 630T BRET mechanical press with coil feeding and uncoiling line in perfect condition. Recently installed electrical cabinet, new lubrication circuit. Bljdpfx Ake Ahyyvjnop Machine available for immediate sale and can be inspected at our workshops in Peschadoires, France. Technical documentation provided with the press. Price upon request.

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm] Bedpfxjuhag Ae Aknelp