Used eccentric presses single column 25-54t for sale (81)

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm Hnodpfx Asy Rutaog Isl hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1996, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 225 mm dayligth 475 mm table surface area 650 x 465 mm Hodoy Rurpepfx Ag Isnl hole in the table 210 x 170 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 430 x 240 mm ram adjustment 85 mm power requirement 2,2 kW Weight 3,3 t dimensions (WxDxH) 1,1 x 1,9 x 2,2 m with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motoric centralized lubrication, two-hand and foot operation

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm ram adjustment 70 mm power requirement 2,0 kW weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m SPECIAL DEAL as is where is Hnsdpoy Ruriofx Ag Ijl WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2007, pressure 40 t stroke 12 - 100 mm Hnedpfx Aeyx Intog Ijl no. of strokes 60 - 150 /min throat 220 mm dayligth 340 mm table surface area 650 x 480 mm ram surface 370 x 300 mm ram adjustment 70 mm power requirement 4,0 kW Weight 3,0 t dimensions (WxDxH) 1,2 x 1,5 x 2,3 m with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2009, pressure 40 t stroke 4 - 100 mm Hsdovzxpnspfx Ag Ijnl no. of strokes 130 /min throat 230 mm dayligth 475 mm table surface area 650 x 460 mm hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 435 x 240 mm ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Condition: new, Year of construction: 2025, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 440 mm, table length: 700 mm, punching force: 40 t, drop-through hole in table: 140 mm, ram bore: 35 mm, stroke adjustment: 80 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual-hand/pedal control Areas of Use: - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-sided slideway guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 alloyed steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double solenoid safety valve • Manually adjustable stroke • Finger-hand protection safety system with light curtain • PLC control system • Dual-hand/pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic protection system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die made to required specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between uprights: 330 mm Ram adjustment: 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage size: 575 mm Side anchorage size: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die clamp slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: Please notify us if you require any modifications to the technical specifications. Hsdpfovtx Axsx Ag Ienl ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sale, commissioning, and aftersales processes are handled by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 3 kW (4.08 HP), pressing force: 35 t, stroke length: 70 mm, table width: 400 mm, table length: 600 mm, overall weight: 1,500 kg, punching force: 35 t, stroke adjustment: 45 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for serial production. Key Advantages - Consistent stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Production-ready operation with PLC control and dual-hand/foot pedal controls Applications - Cold cutting and punching operations - Cold cropping applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame Hodpfsx N Nd Rjx Ag Isnl • Four-sided guideways • Spheroidal cast iron connecting rods and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies tailored to your specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable bolster size: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram adjustment): 45 mm Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Included Safety barrier: Included Operation system: Pneumatic clutch–brake system Mounting type: Floor-standing Frame type: C-type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: Please contact us for any modifications required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 2200189, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, pressing force: 25 t, stroke length: 80 mm, table width: 380 mm, table length: 570 mm, throat depth: 190 mm, total length: 1,700 mm, total width: 2,300 mm, total height: 2,480 mm, overall weight: 1,960 kg, Equipment: safety light barrier, The machine comes from a site closure. It is in a well-maintained condition and is ready for immediate use. The machine was used in production until it was put into storage. Hjdpfsy Sgivox Ag Ijnl

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min Hedpfx Agsy Nd Svs Ijnl shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm). Hedpfxey Nd Spo Ag Ienl

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm Hodpfxstx E Rqo Ag Ionl ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm Hodeykb Dqspfx Ag Ionl total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Hnjdpfx Aey H Iddjg Iol Video about functionality available

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm Hodpfxey I Dd No Ag Ienl ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm ram - range of adjustment 85 mm Hodpfxoy I Ddvs Ag Ijnl hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Hodpfsy D Uhdex Ag Isnl Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: not inspected (used), Year of construction: 1968, machine/vehicle number: 7282, functionality: unexamined, pressing force: 25 t, controller model: SIEMENS SIMATIK, ram adjustment: 50 mm, stroke adjustment: 75 mm, stroke rate (max.): 110 1/min, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Press force: 25 t Stroke adjustment: 5 – 75 mm Ram adjustment: 50 mm Ram strokes: 110/min Hjdpfx Ajy D Tctjg Isnl MACHINE DETAILS Control model: SIEMENS SIMATIK PLC Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,500 x 2,000 mm Machine weight: 3,000 kg EQUIPMENT Rotary indexing unit with 5 stations Automation system (manufacturer: PÜSCHEL) Two vibratory bowl feeders External reference: 23

Condition: not inspected (used), machine/vehicle number: P5541750, functionality: unexamined, pressing force: 25 t, stroke length: 180 mm, overall weight: 500 kg, stroke adjustment: 80 mm, No reserve price – guaranteed sale to the highest bidder! Bidding entails a binding obligation to collect the item within the period from 23.06.2026 to 26.06.2026! Hedpfx Aoy D Tafsg Ijnl TECHNICAL DETAILS Nominal pressing force: 22 t Maximum pressing force: 25 t Stroke adjustment: 80 mm Stroke: 180 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,000 x 1,900 mm Machine weight: 500 kg External reference: 64

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Hjdpfxomi Rpio Ag Isnl 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: Hnedpfsnwmh Sox Ag Isl * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 30P - C Frame Eccentric Press - 30 Tons (300kN) TECHNICAL DATA: * Power: 30 tons (300kN) * Strokes Per minute: 140 * Ram-Table Distance: 305 mm * Stroke Adjustment: 0 - 60 mm * Ram Adjustment: 60 mm * Table Dimensions: 400 x 600 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination Hnsdenwfrujpfx Ag Iel * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm Hodpswirbxefx Ag Ionl 2050 mm 1670 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Options: vibrations pads € 132,- bolster plate € 720,-

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Machine LxWxH: 160 x 120 x 260 cm Hjdpfett A T Tjx Ag Ienl Machine weight: 6 Ton

Condition: used, Year of construction: 1976, pressure 032 t throat 280 mm stroke fix 140 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 370 mm table surface area 700 x 550 mm hole in the table 260 x 260 mm table height above floor 860 mm passage to the back 350 mm ram surface 320 x 300 mm ram adjustment 63 mm weight 3,0 t Dimensions (WxDxH) 1,2 x 1,4 x 2,4 m the press has a FIXED stroke permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, FIX stroke, manual ram adjustment, motoric centralized lubrication, two-hand and foot operation Hnjdpeyx Imiefx Ag Ijl can be offered with or without putting into operation in our warehouse

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new Hedpeyunphefx Ag Isnl 1) Amada TP45FX 2) PATEC 110ton press with recoiler