Used transfer presses for sale (10)

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Ihedpfxjx Ry Dqj Ah Net +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Ijdpfx Aheu Nftte Njht Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, MANUFACTURER Fagor MODEL AND TYPE SE4-1000-4300-2400 Mechanical Transfer Press with Coil Feed (TP5) YEAR 1994 Capacity 1000 tons Bed area 4300 mm x 2400 mm Slide area 4300 mm x 2400 mm Stroke 720 mm Shut height (min) 800 mm Ihedpfxou Er Hxe Ah Njt Shut height (max) 1200 mm Speed 10 - 20 spm Adjustment 400 mm Approx. Height above floor 8296 mm Features Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, Manual clamping on bolster Transfer Max transfer beam out 2352 mm Max transfer beam in 952 mm Distance from bolster to transfer rail 765 mm Feed height 760 mm Pitch 625, 800, 1000 Clamp in/out 225 mm Lift 0 - 200 mm Height of exit conveyor above bolster 660 – 770 mm Coil Feed Max coil weight 5000 kg Max coil width 1465 mm Coil o/d 1550 mm Coil i/d 508 mm Material thickness 0.5 – 1.5 mm Max load pitch 0 – 1000 mm Material feed height over bolster 760/850 mm

Condition: excellent (used), Year of construction: 2008, ram adjustment: 600 mm, pressing force: 2,000 t, stroke length: 700 mm, table length: 5,500 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Table dimensions: 5500 × 2500 mm Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 390000 kg Normal slide rest position: Top Dead Centre Maximum flywheel speed: 421.6 rpm Maximum slide dimensions: 5500 × 2500 mm Max weight of upper die: 200 kN Power supply: 400 V, 50 Hz Minimum pneumatic supply pressure: 6 bar Hydraulic pressure in brake–clutch unit – min.: 68 bar Hydraulic pressure in brake–clutch unit – max.: 73 bar Transfer system: Transfer stroke: 0-1250 mm Ihedpex Ifrzjfx Ah Njt Maximum opening: 2500 mm Bar-closing stroke: 0-750 mm Lift stroke: 0-280 mm Internal clearance between closed bars: 1000 mm Pass-line height relative to bolster: 580 mm

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Ihodpfox Idxmex Ah Not Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Ihedpjhtaaqofx Ah Not Working speed in mm/sec.: 18 - 40

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Ihodjq N Et Nopfx Ah Not Press tables 1,200 x 600 mm Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ram adjustment: 400 mm, pressing force: 2,000 t, stroke length: 800 mm, table length: 7,300 mm, table width: 2,500 mm, Type: Stamping press Ihodpjx Ifn Aofx Ah Not Manufacturer: Aida Model: DSF-TE4-20000-730-250 Year of manufacture: 2022 Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute: — full-revolution mode: 3–28 — endulum mode (at max. feed 105 mm): 3–50 Slide stroke: 800 mm Slide adjustment: 400 mm Maximum distance between slide and press table: 1200 mm Clearance between uprights: 7580 mm Slide dimensions: 7300 × 2500 mm Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor power: 30 kW Maximum upper die weight: 35000 kg Normal slide rest position: Top Dead Centre Total stopping time at 15 strokes/min: 799 ms Safety distance: 1278 mm Safety brake pressure: 105 bar Power supply (three-phase): 400 V, 50 Hz Minimum pneumatic supply pressure: 5.5 bar Transfer system: Transfer stroke, forward (adjustable): 0–1200 mm Opening/closing stroke for each side (bar travel, adjustable): 0–1020 mm Lift stroke (adjustable): 0–350 mm Internal clearance between bars in closed position: 700 mm Maximum opening between bars (bars fully open): 2740 mm Bar section dimensions: 220 × 220 mm

Condition: excellent (used), Year of construction: 2008, Manufacturer: ROVETTA / AIDA Model: S4-20000 5500-2500-LD Press Force: 2,000 tons Stroke: 700 mm Strokes per minute: 8–24 1/min Ram Adjustment: 600 mm Side Opening: 3,100 x 2,700 mm Iodpfx Aex Idt Dsh Noht Table Surface: 5,500 x 2,480 mm Ram Surface: 5,500 x 2,480 mm Height of Sliding Table: 600 mm Drawing Cushion: 1 unit Drawing Cushion Force: 1,500 kN Dimensions of Drawing Cushion: 850 x 1,260 mm Drawing Cushion Working Stroke: 250 mm NORDA Transfer Transfer Step: 0–1,250 mm Transfer Opening min. / max.: 1,000 – 2,500 mm Transfer Stroke: 0–280 mm Millutensil Coil Line Material Thickness: 0.6 – 2.0 mm Maximum Material Width: 1,600 mm Decoiler Capacity: 15 tons

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Ihjdpef Rt Ubjfx Ah Net