Taper clamping bushes, clamping bush
Brrgxfu9su
-Type: 1615
-Bore: 30 mm
-Dimensions: Ø 57/38 mm
-Number: 13x available
-Price: per piece
-Weight: 0.41 kg
floor-plate length:530 mm
plate width:400 mm
plate height:50 mm
hole in the table:80 mm
2riw8e
addtitional bolster plates with different sizes on stock
.
Gsk0kksc3
Dimensions : 1200 x 800 x 110 mm
.
Hole 350 x 200 mm
.
Number of tools 36 St.
dimensions 0,72 x 0,56x 0,95 m
weight 27 kg
Fqzmvnz
New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
/
weight max. 10 t
range L-W-H / mm
10000 kg
1400 mm
Ewbkrbh
1420 mm
1
2900 mm
1900 mm
2950 mm
10000 kg
minimum die width 600 mm
3-wheel chassis with sideways travel
operation via hand held panel
hyraulic die displacement
Condition: practically new, 100 hours of operation
diameter: mm
intake diameter: 310 mm
7nk2y0x2s
intake:
weight: 216 kg
dimensions L x W x H: 0,5x0,2x0,9 m
conrods for mechanic press PEE 250
trapezoid thread dia. 146x14mm
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer
Bivwyz89gh
-T-grooved plate
-Width: 300 mm
-Length: 420 mm
-Height: 70 mm
-Groove width: 14 mm
-Weight: 52 kg
Maximum load: 155 kg.
Diameter: 880 mm.
Belt width: max. approx. 100 mm.
Bei27myetx
Ring adjustment inside, from approx. 200 to 400 mm.
Right and left rotation
with switching device (dancer).
Weight: approx. 100 kg, drive: 380 Volt.
The reel can be inspected and demonstrated under power by arrangement and is available immediately. Free loading from stock.
Please also note my other advertisements.
300 mm
Bkvab08q78
AYEL-TECH BENDING DEVICE
- Sheet width 450 mm
CALL FOR MORE INFO
Brv0fpwg
DUTCHMACH
Metalworking machines
ENSCHEDE
Coil tongs, coil grab for crane / overhead crane
Siegert & Co. Hamburg
Dead weight 11 t
Load capacity 10 t
The tongs are fully operational and are sold with
test report and new UVV!
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test protocol, which is part of our service.
The MMV Group offers you especially for our products the suitable financing.
Blw9um2phi
Calculate now with MMVfinrate easily online your monthly rate.
On request you will receive ...
die cushion capacity: t
7nk3cl7pt
die cushion stroke: mm
die cushion area: mm
weight: 200 kg
dimensions: 0,6xDm 0,3 m
draw cushion for a WMW Erfurt Press type PYE 160
blankholder force 50Mp
ejector force 4 Mp
stroke up to 160mm
flange diameter 280mm
piston diameter 160mm
piston central drill hole M 16, fixing holes M 24, diameter 118mm
hydraulic connection 2x 1 inch
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine
-Dimensions: 930/700/H90 mm
-Plate: massive
Lqmbh
-Bore in the middle: Ø 100 mm
-Weight: 450 kg
double decoiler 2 x 2000 kg, hold down arm, electric decoil- feeder
brand new (from exhibition)
Jkuhtq2b
Tol measurements:2500 x 1800
weight max.:20 t
range L-W-H:1920 x 2818 x 1140 mm
:1000 - 2000 mm
Hew8n0bmk
:700 - 1200 mm
Weight:2 t
Motor output:2,2 kW
:70 mm
Tol measurements:2500 x 1800 mm
T - slot table unused.
Suhzmg
dimensions: 510x 340x50
hole 80mm
Feed with straightener for eccentric pressTechnical data: Feed length max. 180 mmBand width max.160 mmUsed, in good condition
Yr8vyk
1 used press table in very good conditionDimensions: 500 x 380 mm
Bip32tsmk
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer
-T-grooved plate comes: from a Huller Hille milling machine type nb-h 70
-Width: 475 mm
-Length: 500 mm
-Height: 68 mm
-Plate: is solid
-Groove width: 12 mm
-Dimensions: 500/475/H68 mm
B8inksq7
-Weight: 90 kg/piece
Plate size: 600 x 900 mm
Clearance hole: 150 x 310 mm
Cclhwg3u
Plate thickness: 70 mm
crossed T-slots for slot nuts: M 20
Weight: 230 kg
Type: Mechanical Forging Press
Manufacturer: EUMUCO
Year: 1974
Technical Details:
• Pressure max 4000 ton
• Ram stroke 350 mm
• No of Strokes/min 60
• Table Surface 1360 x 1500 mm
Gcyjf87
• Main motor power 186 KW
• Over ground height 6555 mm
• Weight 235 ton
The machine is in running condition.
Feeding leveling machine
Benktngygq
Make: helmet Erding
Type: EVR 800-2 / 150 9 / 70
Year of construction: 2004
Bandwidth: 200-800 mm
Band thickness: 1,0 to 6,0 mm
Material cross section: Max 4000 mm ² at 600 N / mm²
Setting rollers ø: 70 mm
Number of straightening rollers: 9 PCs
Recommended speed: up to 15 m / min / frequency controlled
Weight: approx. 3500 kg
Operating voltage: 230 / 400 V 50 Hz
Control voltage: 220 V, 50 Hz, 24VDC operator suitable
Signal and relay: 24 V DC
Solenoid: 24 V ...
conventional press table dimensions 900 x 600 mm
Pt2nfu
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
-Intermediate plate for hydraulic press eccentric press
-Dimensions: 550/440/H61 mm
-Bore: Ø 100 mm
Ql0qeisfu
-Groove: 22 mm
-Weight: 100 kg
Plate size: 400 x 700 mm
Behnmfutts
Plate thickness: 50 mm
clear width between the guides: 505 mm
Distance between foot and top plate max .: 230 mm
Distance between foot and top plate min .: 205 mm
Column-Ø: 50 mm
Technical data:-2 pcs double V - dies length each 675mm-2 x VB 23 mm , unequal isosceles , VT 11 mm-width die 55 mm-width die 60 mm-height dies 60mm-6 pcs double punch suitable for double V- die B 13 - H 20mm- length 50 , 100 , 200 , 300 , 370 , 400 , -height punch 70mm-total height die 120 - 140mm-total weight approx. 40 Kg
Nmmq2
MTS SERIES 293 HYDRAULIC SERVICE MANIFOLD HSM - hydraulic pressure and flow regulation
Model No: 293.32
3000 psi / 20,7 MPa
description from supplier:
Installing these hydraulic pressure and flow regulation devices between the HPU and servovalve allows operators to turn each hydraulic circuit on and off, as well as set the low-pressure level. Smooth, controlled transitions enhance safety and make system control more predictable. By minimizing the effects of rapid
application and removal of hig...
Heavy feeding machine for eccentric presses
Technical data:
maximum advance width 500 mm
Bdw3jfvsih
maximum advance length 550 mm
with
-Access to the eccentric shaft eccentric press
used
Used Bruderer BBV 320/200 Roll Feed
Maximum strip width 400mm
Maximum strip thickness 12mm
Maximum feed 0 - 200mm
Roller width 200mm
Feeding angle 180°
Weight approx. 1000kgs
Bac8flmile
Suitable for Bruderer BSTA110 or BSTA125 press.
No Cardan shaft, guard or mounting plates included.
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
-Intermediate plate for: hydraulic press, eccentric press, milling machine
Notffup2
-Dimensions: 1100/650/H100 mm
-Plate: solid
-Bore: 8x
-T groove: 28 mm
-Weight: 536 kg
Material width: 2-80mm
Material thickness: 0,3-1mm
Speed: 0-40meter/min.
working direction left-right
Rolls: 20 pcs., diameter 30mm
Decoiler capacity: 300kg
Pneumatic break
7n8tjgjjz
Scrap shear for strip
Cutting width: max. 300 mm
can be used for strips up to 2,0mm
mounted on solid columns with hydraulic system, 3 kW
can be used in 2-hand or automatic modefuer 2-Hand und Automatikbetrieb
0lbpf2
Feed with straightener for eccentric pressTechnical data: Feed length max. 180 mmBand width max.160 mmUsed, in good condition
Bfufi8qp3h
One used gripper feed Bruderer BZV60, complete with cardan shaft.
Previously fitted to BSTA 25 press. Left-hand side mounting.
Max strip width 70 mm.
Bac8ltu8pz
Max feed length 60 mm.
Suitable for operating speeds up to 1300 SPM.
T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table
-Intermediate plate: for hydraulic press eccentric press
Iehncpj
-Dimensions: 455/365/H40 mm mm
-Bore: Ø mm
-Dovetail groove: 17 mm
-Weight: 45 kg
Combined Decoiler/Straightener
7n03cp87j
Material width: 30-400mm, Material thickness: 0,4-2mm
7 pcs. straightening rolls
4 pcs. pulling rolls
Speed: 2-20m/Min.
Max. tool load: 2.000kg
Ysn0qpq0q
Tool size:
Width: max. 800mm
Length: max. 1.160mm
Table over floor: 900 - 1.300mm
Performance:
- Table 360° rotatable
- 4 pc. roller conveyor
- rotatable stopper at conveyors
- hydraulic lifting
- car gets new batteries
New goods bearing parts of eccentric presses EXP 135-150
these parts are no longer needed, are unused (spare parts warehouse).
If you are interested to purchase the full range or parts
beg your message. thank you
The sale is due to the non-production zubestimmenden age, those in stock without any warranty.
Subject to prior sale.
List of spare parts for eccentric presses (EXP 135-150) Mueller Gefress: oe
Year ca. 1965-1970?
Spare parts for Mueller Gefress Eccentric
(Approx EXP 153/150?) Big pictu...
Pneumatic clamp feeder
Gvrwuk
Technical data:
maximum band width 250 mm
Max stroke 190 mm
Max material thickness 4.0 mm
External dimensions approx. 1300 x 600 x 450 mm
used, in good condition
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
- Intermediate plate for hydraulic press eccentric press
-Dimensions: 540/430/H80 mm
-Groove: 22 mm
Qldbdvqw3
-Weight: 140 kg
Consists on a ALBA rollfeeder, a Heilbronn straightening machine and a decoiler
for material 400x3mm
Xuisziblw
Press control make Brankamp,
was dismounted out of a machine because it got a complete new control.
Dye0wx2
We have not tested it, but it was in operation until disassembling.
Could be used as spareparts for the same type.
Heavy feeding machine for eccentric presses Fabr. SCHLEICHER
Technical data:
maximum advance width 550 mm
maximum length of feed per stroke 1000 mm
External dimensions approx. 2200 x 1000 x 1300 mm
used
Njaqj
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table
-Dimensions: 620/1560/H260 mm
-Plate thickness: 20 mm
-Plate is: with supporting ribs
Bjz33noni
-1x T slot: 15 mm
-Weight: 360 kg
Electronic roll feeder DREHER, type WAV-RDS-2E, Modell 1125D
material width 510mm
material thickness 0,2-5mm
2 feeding rolls with diam. 125mm
Feeding speed max. 130m/min.
requested power 5KW
Bg8y7qs2l2
feeding accuraacy +/- 0,05mm
control and servo motor Siemens
Straightener GSW
new in 1998
material width 500mm
14 rolls
Decoiler DREHER
Modell 2384-MO-FPS
new in 2001
coil weight 6 tons
material width 800mm
Inner diam. 470-530mm
Outer diam. 1500mm
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
-Dimensions: 1500/3516/H260 mm
-Plate thickness: 30 mm
Mwsisezh
-Plate is: with supporting ribs
-1x T slot: 17 mm
-Weight: 1800 kg
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table
-Dimensions: 250/1450/H170 mm
Tp3otu3jt
-Plate thickness: 28 mm
-Plate is: with supporting ribs
-1x T slot: 12 mm
-1x: longitudinal groove
-Weight: 156 kg
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
-Dimensions: 1500/3510/H950 mm
-Plate thickness: 20 mm
Tqq23giod
-Plate is: with supporting ribs
-1x T slot: 18 mm
-with: detachable stop
-Weight: 2600 kg
Used Accessories and spare parts
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
