Used Spotting presses for sale (54)

Condition: good (used), Year of construction: 1991, Millutensil spotting press BV25/PM - Adjustable ejection force (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Cgob Heum Ry Eeb Epujt Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 1988, pressure 70 t Ceb Hb Epovuumpouogt distance between columns 750 mm stroke 900 mm table surface area 700 x 1000 mm Distance table/ram, stroke up 900 mm table height over floor 680 mm ram surface 700 x 1000 mm side window 600 mm max. tool weight 5,0 t max. capacity of swivelling ram plate 2,0 t Speed down 0 - 50 mm/s Speed up 0 - 48 mm/s Working speed 0 - 8 mm/s oil volume 140 l power capacity 9,5 kW weight 8,0 t Dimensions (WxDxH) 2,2 x 1,2 x 3,7 m with swivelling ram, movable table, ejector in table can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Description Make: REIS, type: TUS 160/110, year of construction: 1998, control panel, clamping force 100t, table size. 1,800 x 1,550 mm, table travel 2,000 mm, installation height 1,800 mm, 1 lot of clamping devices Cgsb Hb Epjrl Ir Sjuot

Condition: like new (used), Year of construction: 2023, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses tailored to your needs at surprisingly low prices! ##### Technical data + information: Cebjv Dtt To Hb Epuegt HB 2025-A-013, Hydraulic 150 T portal straightening press with 3000x1500 mm table size Assembly press with up to 150 T output at 300 bar a) Robust machine frame, b) Valves from PARKER, AGRO-HYTOS, HAWE c) Control cabinet technology from renowned manufacturers d) Pump from AGRO HYTOS or PARKER e) Table size of the press table 3000x1500mm f) Table height 800 mm, from hall floor g) Emergency switch h) Maximum distance between table top and press piston 700 mm i) Cylinder travel 450 mm j) Front open width between the bridge stands 1550 mm k) Travel range of the pistons from left to right 1000 mm l) Travel of the bridge from the front to the rear would be 2500 mm m) Motor power 4 KW n) Oil tank for 100 L hydraulic oil o) Pressing pressure adjustable from 15 to 150 T using rotary control p) Travel speed downwards 7.5 mm mm, upwards 10 mm second q) Starting pressing speed 2.3 mm r) Total height approx. 2750mm s) Total width approx. 3000 mm t) Total length approx. 3000 mm u) Operation via a hand lever on the bridge v) Total weight approx. 5000 kg w) CE declaration and German-language documentation ##### Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers.

Condition: used, Year of construction: 1969, table width: 2,200 mm, table length: 4,000 mm, pressing force: 100 t, power: 30 kW (40.79 HP), lifting height: 1,500 mm, worktable length: 4,000 mm, ram stroke: 1,500 mm, year of last overhaul: 2011, CONTROLS .. conventional PRESS DESIGN .. drive system: hydraulic PRESS FORCES .. total force (nominal): 100 to PRESS TABLE .. table surface (left-right): 4000 mm .. table surface (front-back): 2200 mm SLIDE .. table surface (left-right): 4000 mm .. table surface (front-back): 2200 mm .. stroke: 1500 mm Cgsb Hb Eewavw Sjpuot SLIDE (HYDR. PRESS) .. working velocity min.: 0.025 mm/s ELECTRICAL SPECIFICATIONS .. total power consumption: 30 kW ATTACHMENTS (PRESSES) .. moving bolster design: front

Condition: excellent (used), Year of construction: 1995, pressure 100 t table length 1.300 mm table width 1.000 mm max. table loading capacity 8.000 / 4.000 kg dist. between pillars (left to right) 1.050 mm dayligth 1.100 mm stroke 1.100 mm pressing speed 50 mm/sec Csb Hb Epjv Sdy Heuegt return capacity 40 t voltage 400 V total power requirement 10,0 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 3,95 x 2,35 x 4,03 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: good (used), Year of construction: 1983, Functionality: fully functional, installation height: 1,400 mm, pressing force: 50 t, wheel away & tiltable table hydraulic ejector upper plate movable Technische Daten / technical details: Druckkraft / pressure 50 to Ständerweite / width of columns 1250 x 705 mm max. Einbauhöhe / max. day light 1400 mm Cjb Heuuy Dceb Epuogt Hub / stroke 1150 mm Tischgröße / table size 1500 x 1200 mm Oberplatte / upper plate 1500 x 1200 mm Antriebsleistung / drive capacity 22 KW Gewicht der Maschine ca. / weight 15000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Csb Hb Esvuumiopuogt Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: BV25P.267, clearance between the columns: 770 mm, table width: 770 mm, table length: 660 mm, table load: 2,500 kg, The BV 25 P is the smallest version of the Millutensil’s spotting presses. Platen dimensions are 770×660 mm (31X25 inches). The max. clamping force is 180kN. The max. load capacity on lower plate is 2.500 kg, while on the upper is 800 kg. This machine has the following extras: Hydraulic ejection unit Automatic special wax injection unit Hydraulic auxiliary cylinder control unit (max. 2+2) Cgob Hewakkysb Epujt ENERGY ACCUMULATOR (SINGLE SHOT)

Condition: like new (used), Year of construction: 2024, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses tailored to your needs at surprisingly low prices! ##### Technical data + information: Cob Hb Epov Df H Eeusgt HB 2025-A-011 Hydraulic 80 T assembly/disassembly press with 1750x1000 mm table size Gantry press with up to 80 T output at 300 bar a) Robust machine frame, b) Valves from PARKER, AGRO-HYTOS, HAWE c) Control cabinet technology from renowned manufacturers d) Pump from AGRO HYTOS or PARKER e) Table size of the press table 1750x1000mm f) Table height 800 mm, from hall floor g) Emergency switch h) Maximum distance between table top and press piston 500 mm i) Cylinder travel 450mm j) Front open width between the bridge stands 1050 mm k) Travel range of the pistons from left to right 730 mm l) Travel range of the bridge from front to back would be 1100 mm m) Motor power 4 KW n) Oil tank for 100 L hydraulic oil o) Pressing pressure adjustable from 8 to 80 T using rotary control p) Travel speed downwards 8.5 mm, upwards 10 mm per second q) Starting pressing speed 4.3 mm r) Total height approx. 2300 mm s) Total width approx. 2000 mm t) Total length approx. 1750 mm u) Operation via a hand lever on the bridge v) Total weight approx. 1800 kg w) CE declaration and German-language documentation ##### Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers.

Condition: used, Year of construction: 2001, machine/vehicle number: 01.126.00, Pressure total: 40 ton Daylight: 740 mm Csb Hb Epsv Nqg Ieujgt Table surface area : 670 x 570 mm Slide area: 670 x 570 mm Ejector Force: 30 kN max. capacity of swivelling ram plate: 10 kN Die Weight on table max.: 20 kN Oil volume: 120 l Required power: 9 kW Dimensions L x W x H: 2,4 x 2 x 3 m Distance between the columns F - B: 620 mm Weight of machine approx.: 3,6 ton Standard configuration Control SIEMENS S7-200Swivel device 180°Centered ejector table Control device for tool cylinder

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 1 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Cob Hb Epeucgqwousgt Serial no: max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: good (used), Control Console for Robot KUKA REIS ROBOTICS. It comes from a Robot RV60. Cgob Hb Esrta T Iepuot

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t Csb Hb Esvuumcjpujgt oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking press can be inspected in running condition in our warehouse

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: BV28E.081, clearance between the columns: 1,200 mm, table width: 1,200 mm, table length: 1,000 mm, table load: 7,000 kg, BV 28 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism through Heidenhain optical lines. The BV 28 E is equipped with user-friendly graphics control panel, monitored through Siemens PLC commanded by Touch Panel. Platen dimensions are 1.200×1.000 mm (47X39 inches). The max. clamping force is 500kN. The max. load capacity on lower plate is 7.000 kg, while on the upper is 2.500 kg. Cjb Hb Eowakkmjpuegt It has the following options on it: ENERGY ACCUMULATOR (SINGLE SHOT) Automatic special wax injection unit Hydraulic auxiliary cylinder control unit (max. 2+2) Hydraulic ejection unit

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW Cob Hbsfxyi De Epuegt work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: good (used), Type BV 25/ P (with extendable lower table) Cgsbov Eybye Hb Epuot Technical data: Closing force 18 tons Opening force 20 tons Lifting speed adjustable approx. 0 - 1 m/min . . Extendable table size 800 x 660 mm Upper part pivotable .

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm 1.200 mm Cgsb Hbsvbwito Epust max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Cgjb Hb Epsvuul Esuet Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: new, Year of construction: 2025, Functionality: fully functional, total height: 2,700 mm, table height: 760 mm, total width: 2,300 mm, total length: 2,250 mm, table width: 1,200 mm, table length: 1,100 mm, overall weight: 7,500 kg, input voltage: 400 V, retraction force: 10 t, table height above floor: 760 mm, pressing force: 100 t, oil tank capacity: 200 l, working height: 760 mm, Description: This machine is used by our customers as a test or spotting press. The upper tool can be tested after the pressing / spotting process thanks to the 105° folding ram plate. This machine is also ideal for test pressing. It works very precisely and is manufactured in a very stable four-column design. This press was last delivered to one of our customers in January 2024, and we are currently planning a new build of this machine. Thanks to short supply chains and cross-process production options, we can have this press manufactured in a very short time by our plant in Spain. If you require technical changes to the open height or table size, we can take this into account during construction. The capacity of 100 tons can also be reduced to 60 tons or increased to 120 tons. We are happy to offer you an alternative press with a pressing force of 200-400 tons and a ram twist angle of up to 135°. Net price ex works € 146,250 Delivery time approx. 12 - 16 weeks Location of the machine Plant Spain Manufacturer Hidrogarne Model ML-100E Description, use Spotting press, tryout press Condition New Year of manufacture 2023 Reference number 24-0419 Cjb Hjvah U Rjb Epuegt Weight 7500 kg Total height 2700 mm Overall width 2300 mm Overall length 2250 mm Table height 760 mm Distance between the columns Table dimensions 1200 mm x 1100 mm Dimensions of ram plate 1200 mm x 1100 mm Working height 760 mm Column diameter Max. Pressing force 100 tons Retraction force 10 tons Open height 1200 mm Top stroke of ram Approach speed 40 mm / sec. Speed when pressing 10 mm / sec. Speed when retracting 40 mm / sec. Oil tank capacity approx. 200 l Input voltage 400 V Energy output motor and pump 5.5KW / 7.5HP Floor space at least 3000 × 3000 mm Special functions, special features: Fold-down ram plate, extendable table

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Cgeb Hovuul Seb Epujt Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table can be offered without or with putting into operation in given condition - video at seller'S site before dismantling available

Condition: as good as new (ex-display), Year of construction: 2015, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm Cjb Hbsffamqj Epujgt :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Cob Hbjfhcc Sj Epusgt Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: used, Year of construction: 2019, pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t Cgeb Hb Ejd E Irlepuot :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressure:40 t table length:1000 mm Cgobedxrqxo Hb Epuot table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm