Used Stock Press for sale (35,704)

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3116-PRO DA-66T Specifications - Nominal bending force: 1600 kN - Motor power output: 15.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 9700.0 kg - Oil tank: 210 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation Giodpfxou T H Iqe Agbel - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Godpogi Dlpofx Agbsil Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4120-PRO DA-66T Specifications - Nominal bending force: 2000 kN - Motor power output: 18.5 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s Giedpfx Agovwmi Ijbjl - Return speed: 110 mm/s - Weight: 12500.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 3550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-66T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Gsdpjvwmf Nofx Agbeil Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours - Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3120-PRO DA-66T Specifications: - Tonnage: 2000 kN - Motor Output: 19.0 kW - Oil Tank Volume: 210 l - Approx. Weight: 10000.0 kg - Inside Frames: 2550 mm - Bending Length: 3100 mm - Distance between side frames: 2550 mm - Side Frame Width: 1600 mm - Bed Height: 880 mm - Daylight Opening: 530 mm - Stroke: 260 mm - Table Width: 90 mm - Throat Gap: 410 mm Speed: - Approach 150 mm/s - Working 10 mm/s - Return 130 mm/s Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - 2D and 3D graphical touch programming module - 3D visualization for simulation and processing - 17" colour TFT screen of high resolution - Full Windows operating system - Compatibility with the Modusys Delem system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in parameter adjustment menu - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. Godpfju T H Rrsx Agboil See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3116-PRO DA-66T Specifications: - Tonnage: 1600 kN - Motor Output: 15.0 kW - Oil Tank Volume: 210 l - Approx. Weight: 9700.0 kg - Inside Frames: 2550 mm - Bending Length: 3100 mm - Distance between side frames: 2550 mm - Side Frame Width: 1600 mm - Bed Height: 880 mm - Daylight Opening: 540 mm - Stroke: 260 mm - Table Width: 60 mm - Throat Gap: 410 mm Speed: - Approach: 160 mm/s - Working: 10 mm/s - Return: 130 mm/s Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - 2D and 3D graphical touch programming module - 3D visualization for simulation and processing - 17" colour TFT screen of high resolution - Full Windows operating system - Compatibility with the Modusys Delem system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in parameter adjustment menu - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Gsdpfxju T H Ano Agbjil Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetitions each - up to 30 lower and upper dies can be stored in the memory - controller with 2D/3D programming mode - 17″ TFT touch screen - Windows with driver software (possibility to create programmes using the external computer) - control of bending compensation from the controller - comprehensive design of the Delem controller - USB with possibility to connect devices - space for connecting a bending angle sensor Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months Gjdpfx Agsrp Dt Tsboil - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Electric press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Giedpjrp Dp Tsfx Agbel Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4124-PRO DA-66T Specifications - Nominal bending force: 2400 kN - Motor power output: 22.0 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14000.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm Godpfx Agevwmkfjbeil - Distance between side frames: 4100 mm - Ram width: 3550 mm - Table height: 1610 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resolution TFT colour screen - Full Windows operating system - Compatibility with Delem Modusys system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in this menu for parameter adjustment - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site Gisderp Dwajpfx Agbel

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10000.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Gisdpfeh Ia Trex Agbjl Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm Godpegi Dk Dofx Agbjil - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3112-PRO DA-69T Specifications - Nominal bending force: 1200 kN - Motor power output: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1590 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution Giodpfxevwmh De Agbel - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-69T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-69T control - More efficient bending thanks to automatic control of 8 axes - Can store up to 500 programs, each consisting of 25 steps and 99 repetitions. - Can save up to 30 upper and lower dies. - 2D and 3D programming capability - 17-inch color TFT screen of high resolution - Windows-based software with PC programming capability - Crowning control managed by the controller - A well-integrated structure, designed by Delem to meet the highest standards. - USB port with device connectivity - Mounting port for a bending sensor - The control system and sensors prevent collisions between individual axes. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Godpfx Agsvwmgtobjil Within the service, our technicians may - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Year of manufacture: 2022 Gijdpfx Aox Scplegbsl Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse  Beautifully crafted antique Spindle Press Gsdpfx Aowq Stqogboil Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. Gijdpfx Aox Ig Nhjgbol = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – Gjdpfx Agex Ig Nbjbjil = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Intended use: Construction Gjdpfxjx Dy E Eo Agbjil Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine from year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 155 mm Capacity round diameter: 50 mm Number of rolls: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Giodpfjx Tp N Ujx Agbel Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t Giedpfsvzxpujx Agbel year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Gijdox Tp E Aopfx Agbjl Net weight: 800 kg Transport packages: 1 piece Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm Giodpovuuknefx Agbsl capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, throat depth: 1,100 mm, pressing force: 100 t, table width: 300 mm, table length: 1,500 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 100 t Max. stroke: 380 mm Throat depth: 1,100 mm Frame gap: 100 mm Height adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Number of columns: 2 MACHINE DETAILS Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 EQUIPMENT Movable press cylinder Gjdpfx Ajx Tp Absgbsil Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, throat depth: 750 mm, pressing force: 60 t, table width: 260 mm, table length: 1,000 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 Gisdsx Tpy Tepfx Agbel EQUIPMENT CE marking CE certificate Documentation