Used Butt Weld for sale (5,694)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Djlhcsyqr Sxjcqmjcd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, working range: 40 mm, Flash butt welding machine IDEAL BAS 040 – very good working condition For sale is a butt welding machine IDEAL, model BAS 040, suitable for carpentry shops, sawmills, woodworking plants, or for the custom production of bandsaw blades. Technical data: Welding of wood bandsaw blades: 6 mm – 40 mm Welding of metal bandsaw blades: 13 mm – 27 mm Year of manufacture: 2008 Dcslhcoynttxecqmjd Rugged and reliable construction, typical for the IDEAL brand Consistently perfect weld seams Very good working condition The machine is fully functional, has been regularly maintained, and is ready for immediate use. No additional investment required. For further information, photos, or to arrange a demonstration, please contact me.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke Dcjlhexrb Tgeccqmsd - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: T02172, Manufacturer: THERMATOOL Model: HF WELDER CFI 350 kW VF Year: 2014 Condition: Used Stock Number: T02172 Output power: 350 kW Welding frequency: 150 - 250 KHz Djlhccqeyid T Nsmscd Input Voltage: 400 VAC / 50 Hz Total installed power: 525 kVA

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Dslswfg Edshccqmjcd

Condition: used, Year of construction: 1988, functionality: fully functional, Ideal BAS 120. Flash Butt welding Machine for Band Saw Blades. Year of manufacture: 1988. Hydraulic clamping. Annealing pyrometer. Dcslhju Shgbjccqmjd Blade positioning device. Blade width up to 120 mm. Painted used machine in working condition. Delivery from stock. Voltage: 440 V (USA grid). Transformer for 400V attached (EU grid).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 238910, type of input current: three-phase, input voltage: 400 V, Flash butt welding machine iDEAL type BAS 050-11. It is an optimal, long-term solution for your production, which has been successfully implemented several times by customers in Europe and worldwide. INCLUDED: - Flash butt welding machine iDEAL type BAS 050-11 - iDEAL Shear AHE 080 - iDEAL grinding machine SMH 060 Dcslhccjx Uw Saeqmed - box with grinding wheels in attached picture

Condition: used, functionality: fully functional, input voltage: 380 V, electrical fuse: 16 A, nominal power at 50% duty cycle: 4 kVA, continuous power (apparent): 6 kVA, We offer this used IDEAL BAS 20 butt / flash welding machine, year of construction unknown, for sale. Type: BAS 20 Serial number: 18292 Nominal power at 50% ED: 4 kVA Connection power: 6 kVA Idle voltage: 2.8-4 V Maximum upsetting force: 0.25 Mp Welding thickness (steel): 3-50 mm Primary voltage: 380 V Frequency: 50-60 Hz Fuse rating: 16 A Dcjlhccqjx Saxdomsd Number of steps: 5 Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Butt Welding Machine Technical Specifications: Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Dolstwfv Dohccqmocd Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2025, Butt Welding Machine Type KMB5 CE certified Operated: Hand Power at 50% ED 5kVA, Continuous power 3.5kVA Welding Capacity: Up to 5mm + 5mm steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Delhcceq Rga Seqmscd Mains Connection: 220V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 300mm x 370mm x 275mm Weight: 38Kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Dcolhccqjxhf Dzsmsd Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: excellent (used), Year of construction: 2018, Mobile loading ramps, Butt, BKV 614 6 t – used – : Ex-site price: €12,500 (net) Manufacturer: Butt Model: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating Dcolhccoxvh Hhoqmjd With safety railings Condition: very good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: excellent (used), Year of construction: 2023, 2 x mobile loading ramps, Butt, BKV 1013, 10 t, front axle ramp for straight-line loading – used - : Price ex location: €14,950 (net), including loading! Manufacturer: Butt Model: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000 kg Driveway with grating Total length: approx. 12,500 mm Total width: approx. 2,300 mm Track width: approx. 1,960 mm Lip width: 2,000 mm Dcjleyhxktjhccqmod Lip length: 600 mm Length of the straight upper section: 3,200 mm Ramp height at crossover, height adjustable: 1,200–1,650 mm With guardrail Condition: very good Available: immediately Location: 58710 Menden

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 Dolhccjpy Uzyoqmecd - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Year of construction: 1989, condition: good (used), mobile loading ramp, loading ramps, loading ramp, transportable loading ramp -Load capacity: 9,000 kg -Drive-on width: 1940 mm Dcslhccexw Hutsqmsd -Overload flap: 1940 x 800 mm -Heavy-duty wheels: with solid rubber -Height: adjustable 1070 - 1750 mm -Dimensions: 11850/2380/H1220 mm -Own weight: 4000 kg

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod Dcjlechp Awohccqmod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

Condition: used, Year of construction: 2018, Butt plate for loading bridge Bj 2018 Width 2.25 cm Length 7.50cm Hydraulically adjustable on battery and equipped with spoon fork Dcjlexbtbnshccqmjd Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS Dcsleymxlqshccqmod - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 14098/91, short-circuit current: 1,200 A, overall weight: 3,000 kg, total width: 2,400 mm, total height: 2,700 mm, total length: 2,500 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 08/04/26 and 16/04/26! MACHINE DETAILS Electrical Data Electrode force: 26,550 N Operating voltage: 380 V Connected load: 474 kVA Rated power: 3 x 50 kVA Rated current: 228 A Secondary voltage: 3.5 - 6.3 V Rated secondary current: 17,400 A Short-circuit current: 1,200 A Secondary short-circuit current: 92,000 A Mains frequency: 50 Hz Delsyk Up Tehccqmecd Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,700 mm Weight: 3,000 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 6,000 kg, Equipment: documentation/manual, Sideros Syncrolift column lifting and rotating device, 6000 kg load capacity, as new condition Min. height: 450 mm Max. height: 1950 mm Travel: 1500 mm Clamping plate diameter: 800 mm Total height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Dcslhccqsyrz Hnsmed Speed: 0.75 rpm.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. Dcolhccex Urqwsqmsd For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. Dcolhox Urqdoccqmed The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Measurements height 2300 mm Dimensions Machine Length 3990 mm Main Drive Number of axis 6 Dslhccqox D Dizemocd This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding

Condition: ready for operation (used), Year of construction: 2015, This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine. Dcolhox D N A Hsccqmsd Application Types Welding

Condition: ready for operation (used), Year of construction: 2013, This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine. Dolhccex S Siueqmecd Application Types Welding