Used automatic punching machines for sale (141)

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Bodpfxey Ndyas Acnedg Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Bodpfxsuqdhwj Acnedg Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, Thrust (tons) 60 Table size (x-y/mm) 890 x 458 Ram dimensions X-Y (mm) 890 x 458 Stroke (mm) 20 - 76 Slide adjustment (mm) 80 Bedpfx Acjzxt Hlensdg Type of strokes: adjustable Strokes per minute 70 - 750

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Bedpfx Acszxqz Tjnodg Used machine

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Bedpfxozil S Is Acnedg Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bdodszil Suepfx Acnog Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Bdsdpfx Acezv Utnoneg Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system Bdedjzv Ukgjpfx Acneg For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Bedpfezuur Usx Acnsdg Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg Bdjdozg U R Iepfx Acneg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: excellent (used), Year of construction: 1995, Press force: 320 kN Stroke frequency: 1,100/min Ram stroke: 3–50 mm Ram adjustment: 50 mm Bedpfx Aoxcmkfocnedg Drive power: 19 kW Table length: 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feed Including KEYENCE camera monitoring Including decoiler The machine is in very good condition and immediately available

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW Bodpfx Acswx R Rdsnedg weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: reconditioned (used), Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL Bdjdozlqgijpfx Acnsg - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls, - Roll feed BBV or optionally servo feeder available Please contact us for a detailed quotation!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Bdedpezu Ryhofx Acneg Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - Bedpfezu Avbox Acnodg HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Bsdpfx Aozrz Dxocnedg Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: used, Year of construction: 1995, pressure 100 t Bdodpfxozrpvco Acnsg stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW Bdsdpszrpq Tjfx Acnjg weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication, Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m Bedpfx Acjzrpq Hsnodg with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Bedpfjzrpqyjx Acnsdg Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2003 Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Bedpfxjzui Ide Acnjdg Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Includes PBK conveyor system.

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Bdjdpfx Aozui Hajcnsg Table area: 3,000 x 1,400 mm Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: like new (used), The Kaiser RS 2 XA reproduction stand features a non-reflective, matte gray base plate. This plate has a printed grid with centimeter and inch markings. The stand also includes an anodized aluminum profile tube column with centimeter and inch markings. The column can be rotated by 180 degrees. Features of the Kaiser reproduction stand RS 2 XA: • Base plate: 40 x 50 x 2.5 cm (W x D x H) • Column height: 76 cm • Load capacity: max. 1.5 kg Bsdpfx Ajzbxy Rscnedg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Bdjdpfx Aezq Sdyscnog Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: good (used), Year of construction: 2004, Item No.: Lg 34522 High-performance punching machine HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture 2004 (without soundproof cabin) with - continuously adjustable drive - 2-connecting rod drive - pneumatic clutch-brake combination - stroke adjustment - Siemens PC 670 screen control - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 Stroke 12 to 60 mm Installation height (max, stroke and upper die) 320 mm Frame width 1,250 mm Table area 1,250 x 730 mm Die opening in the table 1,160 x 140 mm Punch area 1,250 x 450 mm Punch adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Bdedpfxsip Uqms Acnog Equipment and accessories: Servo roll feed VAMCO SP 150 Year of manufacture 2014 Pass width max. 150 mm Material thickness max. 3.0 mm