Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle Hfjdpfx Agex An Uxj Dor X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Hfodpfxsxzudko Ag Djr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Hodpfxjx Atpbj Ag Djfr Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Hodpfxox Eikgs Ag Dofr Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Hodpfox D T A Dsx Ag Defr Control model: SINUMERIK 802C

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI Hfjdpfx Aox Di Uisg Dor 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5600 kg Measurements width 1850 mm Measurements depth 3130 mm Control Unit Brand FANUC Main Drive Spindle speed range 3500 Spindle motor power 18.5 / 22 kW Number of axis 2 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 24 m/min Hedpfxjx Hbkws Ag Dsfr Workpiece Workpiece drm over bed 570 mm Workpiece drm over support 450 mm Tools Number of index 12 Additional Equipment 4 units available This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lathe with gantry loading! MACHINE DETAILS Hjdpfx Asxzubpog Dsfr Weight: 8,400 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Hsdpfx Aewvrfkjg Defr Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) Hsdpfx Ajx H H Nrjg Defr 22,000 on-hours 10,000-15,000 Hours

Condition: excellent (used), Year of construction: 2020, turning diameter: 200 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 230 mm, 4-Spindle, 2-Turret CNC Lathe KITAKO SHIMADA HS4200, Year 2020, Fanuc-0iTF control, Max. working diameter 200mm. Hjdpfx Ajx Eht Teg Dsfr

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 65mm Main Spindle Speed 5000rpm Main Spindle Motor 24/20kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 65mm Sub Spindle Speed 5000rpm Sub Spindle Motor 24/20kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 700mm Sub Spindle Rapid 50m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 110mm X Axis Rapid 30m/minute Z Axis Stroke 320mm Z Axis Rapid 60m/minute Hedpfxox H R R He Ag Dofr Y Axis Stroke 100mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 110mm X Axis Rapid 30m/minute Z Axis Stroke 550mm Z Axis Rapid 60m/minute Y Axis Stroke 100mm Y Axis Rapid 15m/minute Turret 3 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 180mm X Axis Rapid 30m/minute Installation Footprint 8500 x 1800mm Weight 9000kg Electrics 72 kW, 84 kVA, 122 A, 400 V, 50/60 Hz Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Master 880/33-HF Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6200 kg Main Drive Spindle Speed 6000 RPM Spindle motor power 9 kW Hfodpfx Aox D Hgceg Dor Control Unit Brand SIEMENS Model 840D (NC) This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Hfsdoxzt R Nopfx Ag Djr Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Condition: used, Year of construction: 2010, operating hours: 29,000 h, machine/vehicle number: IntNr231407, Tornos DECO 10a, built in 2010 Control: Fanuc 16i-TB Operating hours: 29,000 Hfodpfx Agjx H Rrks Der Number of CNC axes: 9 Number of driven tool spindles: 3 MAIN SPINDLE Max. bar diameter: 10 mm Max. spindle speed: 16,000 rpm C1 axis: 0.001° COUNTER SPINDLE Max. bar diameter: 10 mm Max. spindle speed: 12,000 rpm C4 axis: 0.001° Oil pan Chip conveyor tray Parts extraction Parts ejector Coolant tank Comprehensive tool holder package LNS Tryton 112 bar loader, 3200 mm with hybrid drum The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 780 mm, turning diameter: 215 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 780 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 27 m/min, Equipment: documentation/manual, CNC lathe Nakamura Tome WT 300 with: - maximum turning diameter 270 mm - maximum turning length 780 mm - Fanuc 18i-TB control unit - main spindle and sub-spindle - spindle nose ASA 8 Hfjdpfxox H Nmmj Ag Djr - C axis - Y axis - 2 turrets with driven tools - automatic door - LNS bar feeder - chip conveyor - various included tapers - various included bars Free 12/24 month payment deferral available

Condition: used, Year of construction: 2005, turning diameter: 380 mm, controller manufacturer: MAZATROL, controller model: 640 T NEXUS, number of spindles: 1, CONTROLS .. CNC controls MAZATROL 640 T NEXUS BASIC FUNCTIONS .. number of spindles: 1 .. number of turrets: 1 .. live positions: yes WORKING RANGE TURNING .. turning diameter (max): 380 mm .. bar diameter (max): 77 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min X/Z SLIDE .. Z-axis travel: 575 mm Hfedpfex H Iucox Ag Der .. X-axis travel: 230 mm .. - rotation speeds (max): 4500 /min .. - drive power: 5.5 kW Additional options • Programmable tailstock • Kitagawa B210 3-jaw chuck • Interface for bar magazine • Tool holder package, including driven tool holder • Coolant pump, 8 bar • Chip conveyor

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 42mm Hsdpfx Agex H R Rts Djfr Main Spindle Speed 7000rpm Main Spindle Motor 29/25kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 42mm Sub Spindle Speed 7000rpm Sub Spindle Motor 19/16.5kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 500mm Sub Spindle Rapid 60m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 250mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 400mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 3 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 125mm X Axis Rapid 30m/minute Installation Footprint 7612 x 1530mm Weight 5500kg Electrics 57 kW, 68 kVA, 97 A, 400 V, 50/60 H Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Boss 552-HD Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand SIEMENS Model Sinumerik 840D Ergoline Main Drive Number of axis 4 Additional Equipment Coolant pump 6 bar, 201 l/min Chuck rinsing device outside at main spindle Coolant equipment external on turning/milling spindle Hedpfsx D Sqaex Ag Defr Hinged type chip conveyor, discharge height 1200 mm Cooling system for spindle motor, turning/milling spindle, and B-axis torque motor Connection for oil mist extractor Machine prepared for workpiece handling robot WH3 (front loading) Environmental packages for unstable supply and increased ambient temperature This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Hfodpfx Ajxy Hp Nog Der X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Swing diameter: 270 mm

Condition: excellent (used), Year of construction: 2005, operating hours: 64,000 h, functionality: fully functional, turning length: 4,500 mm, WFL M60 x 4500 Turning, Milling and Drilling Center with 5 Axes Manufacturer: WFL MILLTURN Model: M60 x 4500 Location: Europe Year of manufacture: 2005 Turning length: 4,500 mm For all technical details of the machine, please refer to the attached technical documentation and photos. Below is a summary of the key specifications: Lubrication and Cooling Systems Central lubrication system Tank capacity: 6 l Oil type: ISO VG 68 Delivery rate: 0.5 l/min Max. pressure: 27 bar Minimum Quantity Lubrication (MQL) Tank capacity: 6 l Oil type: Klübersynth GH 6–100 Delivery rate: 0.5 l/min Max. pressure: 27 bar Pneumatic System Air consumption: approx. 200 l/min Operating pressure: 6 bar Hjdox H Awfspfx Ag Djfr Working Area Nominal length (turning length): 4,500 mm Swing diameter over bed (linear guide X-axis): 690 mm Swing diameter over cross slide: 610 mm Swing diameter over telescopic covers: 650 – 730 mm Swing diameter over steady rest: 530 mm Spindle center height from floor: 1,193 mm Main Spindle Spindle mount: DIN 55026, Type A, Size 11 Front bearing: Ø 160 mm Rear bearing: Ø 150 mm Spindle bore: Ø 115 mm Draw tube passage: dependent on chuck type used Main Drive Motor power (100% duty cycle): 40 kW Spindle torque (gear 1 / 2): 1,830 / 458 Nm Total speed range: 8 – 3,300 rpm Gear 1: 8 – 825 rpm Gear 2: 33 – 3,300 rpm Upper Slide (X/Z) Feed force (Z / X): 2,000 daN Ball screw drives (Z / X): 63 × 20 / 63 × 10 mm Rapid traverse (Z / X): 20 / 15 m/min Travel Z-axis: 4,650 mm Travel X-axis: 700 mm (+670 / −30) Milling and Drilling Unit Max. spindle power: 25 kW Max. spindle torque: 300 Nm Front spindle diameter: 100 mm Speed range: 10 – 4,000 rpm Travel Y-axis: 300 mm (+175 / −125) Rapid traverse Y-axis: 12.5 m/min Feed force Y-axis: 1,500 daN Ball screw drive Y: 40 × 5 mm B-axis torque: 1,200 Nm B-axis swivel range: 200° (−110° / +90°) Tool holder: SANDVIK Capto C8 C-Axis Max. speed: 25 rpm Max. torque: 1,500 Nm Smallest programmable increment: 0.001° Clamping torque (disk brake): 4,000 Nm This offer is non-binding and subject to prior sale. We are pleased to answer any questions, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool package, commissioning, and training).

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Hedpfxsx D I Ubo Ag Djfr Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand MITSUBISHI Main Drive Hfodpox H A Svjfx Ag Dor Number of axis 3 This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1988, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Number of axis 2 Hfjdox H A Spspfx Ag Dsr This NAKAMURA TMC-15 was manufactured in 1988. It's a horizontal turning machine featuring a hollow of 34 mm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA TMC-15 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2023, operating hours: 300 h, Main Drive Number of axis 5 Media Chip conveyor Yes Additional Equipment 36 tool change Includes tailstock function This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Application Types Other Machine Tools Hedpfx Agox H A R Ee Djfr