Condition: used, Year of construction: 1992, turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm Hfedpfx Ahovh Ivqeved x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders Hfedeyah Rvepfx Ahvsd - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 Hfjdpfx Ahsyuy Enovjd - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: excellent (used), Year of construction: 2008, operating hours: 3,858 h, CNC controller: MSX-850III X-axis travel mm: 260 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 275 Upper turret Number of tool slots St .: 12 Hfedoyuy H Sspfx Ahvod Main spindle Speed ​​spindle rpm: 4000

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical Data Center height: 140 mm Distance between centers: 500 mm Spindle bore: 40 mm Bed width: 205 mm Spindle speed, stepless: 30 – 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Overall dimensions LxWxH: approx. 1400 mm x 935 mm x 1550 mm Hjdpoyuy D Refx Ahvofd

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 2,155 mm, total height: 2,272 mm, total width: 2,275 mm, overall weight: 12,200 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 5,879 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 LMB was manufactured in 2024. It features a maximum turning diameter of 650 mm and a turning length of 2002 mm, along with a main spindle chuck size of 21 inches (535 mm). The machine includes a rapid traverse speed of 16 m/min and a maximum spindle speed of 1500 rpm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 LMB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 2002 mm • Driven tool speed: 4000 rpm • Number of tool stations: 12 • Tool holder type: BMT75 • Guideway type: Box guideways • C-axis: Yes • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz Hfjdpfx Aeyuy Agshvod • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Chip conveyor (included) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,105 mm, total height: 2,194 mm, total width: 2,056 mm, bar diameter (max.): 166 mm, overall weight: 10,750 kg, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI Touch, product length (max.): 4,759 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers a rapid traverse speed of up to 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Rapid traverse Z: 20 m/min • Max rapid traverse: 20 m/min • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 952 mm • Driven tools speed: 4000 rpm • Number of tool stations: 12 • Tool interface: BMT75 • Guideway type: Box guideways • Spindle bore: 117–166 mm (depending on configuration) • Coolant system: High pressure coolant through turret • Tailstock: Programmable tailstock • Tool measurement: Automatic hydraulic tool measurement • Cutting force monitoring: Yes • Thread cutting: Fixed entry point with variable speed • Additional handwheel: Yes • Automatic machine door: Yes • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment Hfsdpoyuywksfx Ahvjd • Chip conveyor: Included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Hfedpoyuyrusfx Ahvjd Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Hedpsyuymfsfx Ahvofd Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 605 mm, overall weight: 4,950 kg, controller manufacturer: MAZATROL, controller model: Smooth C, number of axes: 2, Horizontal turning machine manufactured in 2018. This Mazak QUICK TURN 200MA L features a maximum workpiece diameter of Ø 360 mm and a maximum workpiece length of 535 mm. It is equipped with a spindle speed of 5,000 rpm and a turret with 12 VDI positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN 200MA L machine we have for sale. Contact us for further details. • Max Workpiece Diameter: Ø 360 mm • Max Workpiece Length: 535 mm • Max Bar Capacity: Ø 65 mm • Spindle Nose: A2-6 • Spindle Bore: Ø 76 mm Hfsdpfxoyuyh Ae Ahved • Turret Tool Station: 12 VDI positions Additional equipment • Chip extractor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Toolholders bought in company where used for Biglia machine Hfedpfsyuyhiox Ahvjd

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. Hfedpfxexb Dkys Ahved - Sale according to our terms and conditions.

Condition: used, MORI SEIKI TL-5 CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL TL-5 YEAR 1980 RETROFITTED 2016 CONTROL FAGOR 8055 I SWING OVER BED 520.0 mm SWING OVER CARRIAGE 380.0 mm MAX MACHINING DIA 280.0 mm MAX WORK LENGTH 2000.0 mm CHUCK DIA 300.0 mm SPINDLE RANGE 17 – 2000 RPM SPINDLE NOSE A2 - 8 SPINDLE BORE 75.0 mm TURRET 8 STATIONS TAILSTOCK YES PLUS RETROFITTED WITH MODERN FAGOR 8055i CONTROL. 3 SPEED GEARBOX Hfjdpjyuxvlefx Ahvjd HYDRAULIC STEADY SWARF CONVEYOR COMPLETE SET OF MANUALS FULLY WORKING ORDER

Condition: used, total length: 3,700 mm, total width: 1,200 mm, total height: 1,600 mm, Empty weight: 4.000 kg Hodpfeyuxa Rex Ahvefd Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 12.0 - Centre height [mm]: 420 - Swing over bed [mm]: 800 - Carriage turning diameter [mm]: 500 - Distance between centres [mm]: 2000 - Bed width [mm]: 480 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Quick-change tool post, Fixed steady, Digital readout, Four-jaw chuck - Type of digital readout: Fagor 3-A - Transport dimensions: 3700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 7,000 rpm, bar diameter (max.): 42 mm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, controller manufacturer: FANUC, controller model: 31i-B, number of axes: 10, This 10-axis Index C100 swiss type turning machine was manufactured in 2018. It features impressive axis travels of 70 mm in both X and Y directions, and 400 mm in Z. The machine includes three turrets with driven tools capable of 8000 rpm, and a counter spindle diameter of 42 mm. If you are looking to get high-quality turning capabilities, consider the Index C100 machine we have for sale. Contact us for further details. • Production hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7000 rpm • Turrets: 3x VDI25 with Index W-serration; driven tools on all three turrets, up to 30 driven tool positions, 8000 rpm • Coolant system: Emulsion; flushing beside main and counter spindle; through counter spindle; 8 bar pump; 18 bar pressure-increasing pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for cooling main/counter spindles and electrical cabinet • Software/Functions: Milling cycles Transmit / Tracyl Hodpfx Aheyuwyvovjfd • Monitoring: Index Motorforce tool monitoring for Fanuc • Interfaces/Preparation: Ünimag4 interface for bar feeder; preparation for oil mist unit (mechanical flange D200 mm; electrical Harting plug 3x240 V) • Clamping: SK45 in main spindle (without collets); E173 in sub spindle (without collets) • Storage/condition: Machine stored under power in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, hinge-chain type • Handling unit with 2‑finger gripper for finished part and remnant • Conveyor belt for finished parts with flap for remnants • Bar feeder: LNS, 1500 mm Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 6,000 rpm, spindle motor power: 11,000 W, This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Additional equipment • Turret with Direct Mount (12 stations) • High-Precision Linear Guides on All Axes • Coolant System Hjdpfeyuwypex Ahvjfd • Hydraulic System • Full Enclosure • Automatic Lubrication System • Signal Lamp (3-color) • Work Area Lighting • Automatic Machine Shutdown (via M-Code) • Automatic Chuck Operation Machine Benefits Qualitative Machine Benefits • Prepared for a live center with mk4 mount • Tool monitoring system: load monitoring • Control cabinet with heat exchanger • Foundation and leveling accessories • Set of auxiliary tools • Machine documentation • Ce certification • Renishaw-hpra measuring arm • Stable 30° slant bed design for versatile, precise, and cost-effective machining solutions. • Machine connection data: compatible with clamping device 2703 / 0007, chuck connection to standard spindle, spindle standard: din 55026, short taper size 5/6 Technical Machine Benefits • Max turning length: 500 mm • Pinole diameter: 70 mm • Programmable quill travel: 150 mm • Tailstock travel: 290 mm • Reinforced coolant pump (pressure: 20 bar) • Parts catcher for main spindle • Transport conveyor for finished parts • 8 additional m-functions • Interface for bar loader • Bar loader: barload bk105 Extra Information Machine still under power

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Length: 4170mm Hjdpfxeyuwwhj Ahvsfd Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Hfedpjydd H Iofx Ahvjd Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2018, functionality: fully functional, spindle bore: 58 mm, total length: 1,900 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, spindle mount: MK 6, SAEILO CONTUR SJ 430/760 VS Lead- and Feed-Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Centre distance: 760 mm - Swing over bed: 430 mm - Swing over cross slide: 240 mm - Swing in gap: 690 mm - Spindle bore taper: MT 6 - Longitudinal feeds: 0.05 - 0.82 mm/rev - Cross feeds: 0.02 - 0.4 mm/rev - Metric threads: 0.5 - 7 mm - Leadscrew diameter: 35 mm - Leadscrew pitch: 6 mm - Tailstock quill diameter: 58 mm - Tailstock quill stroke: 150 mm - Quill taper: MT 4 - Motor power: 7.5 kW The machine comes equipped with a tailstock, a Multifix quick-change tool post, a SCHUNK three-jaw chuck (diameter: 200 mm), a digital readout, and 4 additional Multifix tool holders. Hedpfx Aoyuvthjhvofd Note: The item must be collected on a binding date to be agreed, between 05 and 07 May 2026. FCA D-74385 Pleidelsheim – loaded onto truck.

Condition: used, Year of construction: 2007, Technical details: Hfedpfx Ahjx Apd Usvsd turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, number of axes: 2, Horizontal turning machine manufactured in 2000. This Index ABC features a maximum spindle speed of 5000 1/min and a bar capacity of 60 mm. It includes an 8-station revolver with driven tools capable of 6000 1/min. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main Spindle Torque (100/40% ED): 95/140 Nm • Bar Capacity: Max. 60 mm • Revolver 1: 8 stations (7 for VDI 25 tools, 1 for synchronous spindle) • Revolver 1 Driven Tools: Max. speed 6000 1/min, power 3.3 kW • Revolver 2: 6 stations, X-travel 81 mm, Z-travel 80 mm • Synchronous Spindle: Max. speed 4500 1/min, torque 10 Nm Hfedpjyuu N Iefx Ahved • Coolant Tank Capacity: 220 liters • Power Supply: 400 V, 50 Hz • Cabinet Dimensions: 1300 mm width x 2000 mm height • Display: 24 cm color flat screen interface • Control Version: C200-4 Additional equipment • Loading Magazine: INDEX MBL 65/3700 • MBL Bar Length Capacity: 3000 mm (D 5–10) / 3600 mm (D 10–65) • Chip Conveyor: Knoll chip conveyor with 840 mm discharge height Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Max. turning diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Hjdpfxjyhwy Is Ahvjfd Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2011, Year of manufacture: 2011 Control: FANUC 32i-TB Max. turning length: 640 mm Hfjdpjyuux Ajfx Ahvjd Tool turret: 12 stations Main spindle power: 12 kW, 4000 rpm, 46 Nm Bar capacity: 66 mm Swing diameter over carriage: 510 mm Max. turning diameter: 400 mm Swing diameter over bed: 680 mm Automatic turret: Yes Main drive power: 15/11 kW Spindle speed: 4000 rpm Tailstock Dimensions (LxWxH): 3800x1850x1920 mm Weight: 5,400 kg

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm Hfjdpfx Aeyh Ivlshvjd - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm Hfjdpfsyh Hkzjx Ahvod - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck