Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Dolovvi Nbon Sx T Sekl

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dslnjvvkipj Sx T Sokl

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Dksln Sx Tjvvkkao Sol Storage location: Nattheim

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Dslsvvi Nnjn Sx T Sokl

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Dkjln Sxovvkmbj T Sjl

Condition: used, Year of construction: 1998, Saw blade diameter: 180 mm. Saw blade bore: 30 mm. Maximum cutting length: 3100 mm. Weight approx.: 450 kg. Dimensions: 3600 x 900 x 1600 mm. Motor power: 2.2 kW. Wood dust tested: HO971001. Storage location: Nattheim Dkjlnjvvkaus Sx T Sol

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Delovvkazsn Sx T Sjkl

Condition: used, Year of construction: 1981, Roller diameter: 800 mm, maximum blade length: 5600 mm, minimum blade length: 5450 mm, maximum cutting height: 500 mm, maximum cutting width: 780 mm, table tiltable: Yes, column side: left, automatic motor brake: Yes, saw blade guide position: top and bottom, saw blade guide: roller guide, design: stationary, working height or feed table height: 950 mm, weight approx.: 720 kg, dimensions: 1480 x 900 x 2440 mm, motor power: 4.0 kW, extraction diameter: 125 mm Doln Sxjvvkmns T Sskl Storage location: Nattheim

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Doln Ssvvkm Isx T Sokl Storage location: Nattheim

Condition: used, Year of construction: 1973, Storage location: Nattheim Dsln Ssvvkt Ujx T Sskl

Year of construction: 2018, Condition: used, Effective flow rate: 660 L/min. Motor: 4.0 kW. Max. pressure: 10 bar. Tank capacity: 270 L. *Compressor only. Storage location: Nattheim Dkeln Sx Tevvkhro Sjl

Condition: used, Year of construction: 1996, Vacuum system with rotary valve. Nominal flow rate: 12,500 m³/h. Filter area: 62.5 m². Weight: 1,350 kg. Maximum vacuum: 4,000 Pa. Maximum air pressure: 8.5 bar. Storage location: Customer. Dksln Sxevviygs T Ssl

Condition: used, Year of construction: 1997, 4-axis machine with 18 kW water-cooled main spindle. HSK F63 chuck X = 4750 mm Y = 1250 mm Z = 200 mm. Maximum speed: 18,000 rpm. 12-station X-axis grooving saw. 4-station drilling head in a 17-spindle spindle. Central lubrication. 17 vertical drilling spindles, completely renewed in 2019. Smooth table. Positioning aid. Stop rows. Pendulum machining. 2 vacuum pumps. All plug-in cards for the control system replaced in 2022. WoodWOP 4.0 tools. Optional: lock case cutter unit, door hinge drilling unit, saw blade unit, 4-spindle unit. Very well-maintained condition. Doln Sxjvvi D Es T Sokl Storage location: Customer

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dolsvvkdasn Sx T Sjkl

Condition: used, Year of construction: 1988, Working width: 1100 mm, 2-belt machine Storage location: Nattheim Dkeln Sxevvkkgs T Sel

Year of construction: 2021, Condition: used, Air flow rate: 900 l/min. Air flow rate: 54 m³/h. Maximum pressure: 16 bar. Air connection: 1/2. Power consumption: 0.18 kW. Dimensions: Length: 325 mm. Width / Depth: 430 mm. Height: 445 mm. Weight: 24 kg. Dkolnsvvkhxj Sx T Sol Storage location: Garbsen

Condition: used, Storage location: Nattheim Dolnovvkrde Sx T Sskl

Condition: used, Max. blade length: 5600 mm Roller diameter: 800 mm Max. cutting height: 520 mm Max. cutting width: 770 mm Table tiltable: Yes Stand side: Left Stop ruler: Yes Saw blade guide: Roller guide Design: Stationary Weight approx.: 800 kg Dkoln Sx Tevvkmus Sol Storage location: Nattheim

Condition: used, Year of construction: 1994, Design: swiveling Swivel angle forwards: + 45° Swivel angle backwards: -10 degrees Table length: 2500 mm Table width: 870 mm Extendable frame support: Yes Number of speeds: 5 Speeds: 3000/4500/6000/7000/10000 rpm Speed selection: Belt shifting + pole switching Speed display: LED Cone of the milling spindle: with 25 pneumatic interchangeable spindles Clamping length of milling spindle: 120 mm Diameter of milling arbor: 30 mm Material of stand: steel Control panel position: above Height adjustment of spindle: electric Swivel adjustment of spindle: electric Spindle locking: manual Spindle brakes: yes Extraction diameter of milling stop: 120 mm Extraction diameter of machine: 120 mm Spindle direction: left/right Motor power: 5.5 kW Electric axes: Spindle height & swivel Table opening closing: Insert segment Stop jaw design: Aigner stop system Stop adjustment: Motorized Milling jaw adjustment: Manual Feed mechanism: Yes Feed adjustment: Fixed speeds Feed: 4 rollers Weight approx.: 1000 kg Dimensions: 2500 x 1500 x 1400 mm Storage location: Nattheim Djljvvkufsn Sx T Sjkl

Year of construction: 2003, Condition: used, Compressor with refrigeration dryer, tank, and condenser SK 26: Rated power: 15 kW Motor speed: 3000 rpm Maximum operating pressure: 10.0 bar Tank: 495 L, year of manufacture: 1980 TC 44: Refrigerant: R134a Capacity: 1.220 kg Maximum operating pressure (refrigeration system): 18 bar Maximum operating pressure (air system): 16 bar Rated voltage: 240 V/1/50 Hz Rated current: 7.2 A Total operating hours: 104,257 h Load hours: 51,949 h Dkoln Sx Tsvvkh Ee Ssl Storage location: Nattheim

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Dksln Sx Tovvi Nzj Sol

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Doln Sxovvi N Ie T Sekl

Condition: used, Year of construction: 2018, Incl. tool / without angular gear Machining area: Travel of the axes: X=4000 mm Y=1670 mm Z=500 mm Working area: X=3300 mm Y= 1250 mm Z=250 mm Passage height C-axis / fourth axis 0-360° for milling spindle 4-way linear tool changer, traveling in X / changing station for 4 tools / units Milling spindle 12 kW HSK 63 / 24000 rpm Automatic central lubrication 12-way linear tool changer Drilling head DH 16 4H 2S Vertical 12 spindles: 7 spindles in X direction and 5 spindles in Y direction Horizontal 4 spindles: 2 spindles in X direction and 2 spindles in Y direction Pre-stroke = 70 mm, max. drill length = 70 mm and shank D=10 mm 2 Grooving saws - each in X and Y directions, max. saw blade diameter 120 mm. Woodflash software. Storage location: Nattheim Dsljvvi N Uen Sx T Sskl

Condition: used, Year of construction: 1979, Max. working width: 220 mm Max. working height: 120 mm Number of spindles: 8 pcs 1. Spindle: bottom Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 7.5 KW 2. Spindle: right Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 5.5 KW 3. Spindle: left Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 7.5 KW 4. Spindle: right Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 5.5 KW HL 5. Spindle: top Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 7.5 KW HL 6. Spindle: bottom spindle diameter 40 mmClamping length 230 mmSpeed 6000 rpmMotor power 5.5 KW Hydro shaft with counter bearing and plan jointer7. Spindle: top Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 5.5 KW Hydro shaft with counter bearing and plan jointer 8. Spindle: Universal spindle Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 5.5 KW Right/left rotation Up/down adjustment of the upper spindle: electric with feed Feed brake system: Yes Feed speed continuously up to: 6 - 36 m/min Feed roller pressure: pneumatic Feed power: 5.5 kW Feed drive: Cardan Lubricant pump: manual Max. chip removal for joining: 10 mm Driven rollers in the table: 3 Control type: button operation Dimension display spindle: mechanical numerical display Feed rollers in front of the planer: Yes Straight jointer for spindle number: 6 + 7 Spindle description: 3 driven rollers Pneumatic pressure at the bottom of the table. Feed roller before planing. Driven rollers in the table. Doln Ssvvkcvox T Sekl Storage location: Nattheim

Condition: used, Year of construction: 1997, Maximum veneer thickness: 2.0 mm Minimum veneer thickness: 0.4 mm Composite material: Glue thread with piston heating Disc cutter: Yes, for conveying the veneer over the machine Type: Stationary Feed speed: 15 m/min Column projection: 620 mm Working height or feed table height: 90 mm Machine number: Approx. weight: 42 kg Dimensions: 700 x 350 x 400 mm Dkjlovvi Uden Sx T Ssl Storage location: Nattheim