Year of construction: 2008, Condition: used, Logs 2.5-5.4 m Diameter 8-78 cm Feed rate up to 130 m/min. Duoljwhnqaoq Nkacjt 2 x HOLTEC infeed units 2 x HOLTEC singulators 2 x HOLTEC step pushers 2 x HOLTEC cross-cut saws 2 x root reducers (BZ WRP Star / Bruks) 6 x HOLTEC log runners / V-roller tables 2 x debarkers (Nicholson A8 31" and Nicholson A5 22") 2 x splinter detectors (Medetec)

Condition: used, Year of construction: 2023, OAV Max 330 Edgebander. S/No. 23040002EB3N3 (2023). Country of Origin: Taiwan Duslq Nowhnkyjkacot Please Note: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1992, volume flow: 6,500 m³/h, filter area: 0.8 m², total length: 1,050 mm, total height: 850 mm, nominal power: 0.75 kW (1.02 HP), Motor 0.75 kW, Dolq Nkswhnkaoaceut Filter area 1000 x 800 mm Extraction connection 350 mm Chassis

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,185 h, Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed rate: 8 - 18 m/min, continuously variable Weight: approx. 2.5 t Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes Delq Nkjwhngueacjut Cross-cut saw unit: Yes Radius, flush trimming unit: Yes Corner rounding unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing: Yes

Condition: used, Year of construction: 1990, machine/vehicle number: 222-1535, Weinig Hydromat 22A 4-sided 7-head planer - 3 Left spindles - 1 Right spindle - 2 Lower spindles Duelqjwhmqxs Nkacet - 1 Upper spindle Free space for left spindle Spindle length - 230 mm Spindle diameter 40 mm Speed 6000 rpm Manually controlled feed Soundproof cabin The price is net Dismantling on the buyer's side

Condition: used, Year of construction: 2011, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, cutting height (max.): 80 mm, I will sell a very good, trouble-free panel saw Format 4 Kappa Automatic KA75. This is actually a saw manufactured for Felder by MAYER, i.e. a saw with a very good reputation, strong, heavy construction. The saw has worked without failure for me since 2012 on 1 shift, it was regularly serviced by Felder, it is well-maintained, I believe it is in very good condition and will serve the new buyer for a long time. Year of production 2011, installed 2012 Cutting length 4300 x 4300 mm. Cutting height 80 mm 9 KW engine + 1.1 KW scoring unit Motorized stepless controlled cutting height (grooving) Cutting optimization Formatting 5 Selling due to replacement with a new Mayer. The machine has been serviced and dismantled by Felder and is waiting for a new buyer. Doljv Ibuyjq Nkacjut Net price

Condition: new, Year of construction: 2025, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation Duolq Nkjia Taqeacot - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: excellent (used), CATALOG NUMBER 7644 Technical data: - max. diameter of the main blade with a scorer 350mm - max. diameter of the main blade without a scorer 450mm - cutting height with a 100mm blade installed - hydraulically adjustable main blade up/down + angle - electric angle display - electric adjustment of the scorer up/down, right/left - spindle diameter 30mm - spindle locking - with a format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1440mm - with a side carriage - with a scorer Duelq Nkswgdh Sjacet - max. diameter of the scorer 120mm - spindle diameter 22mm - scoring motor 0.75kW - main motor 5.5kW - 4 types of rotation speeds - electronic rotation display - diameter extraction nozzle 120mm, 80mm - table top dimensions 1220x730mm - table top dimensions with extension 1230mm - table top dimensions with extension 2070mm - blade guard - dimensions length/width/height 2940x3400x1420mm - weight 1100kg ADVANTAGES – German production – with scoring saw – unpainted – used saw, very good condition Net price: PLN 29900 Net price: EUR 7030 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: not inspected (used), M.-No. 105813, built in 1988, max. air flow 6500 m³/h, motor power 2kW, with heat exchanger, 1" water connection, LxWxH: 2150 x 820 x 820 mm, 2 return air ducts 2000x950x400mm, 1 return air duct 950x950x400mm, external wall connection 700x700mm, bird screen 660x590mm, heat exchanger outlet 400x400mm, WITHOUT connections to return air ducts Doljwhncpsq Nkacout

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min Djlqjlatv Aj Nkacout - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication Duelstq Hkrjq Nkacet - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: used, Year of construction: 2013, Functionality: fully functional, I will sell a very good, little used, because it only worked as a second, spare machine, the Format 4 Perfect 710 E-Motion edge bander in full equipment. This is a well-reputed edge bander, strong, heavy construction. I have had the machine since 2013. Bought new. It worked without failure on 1 shift. It was regularly serviced by Felder - it is well-maintained. I believe it is in very good condition and will serve the new buyer for a long time. Duolq Nkev Ivi Ssacot Feed speed 12m/min. Minimum element length 140mm. Minimum element width 60mm. Feeding of edges from a roll and wooden edgings with a width of 12 to 64 mm. Guillotine shears for edges from a roll with a thickness of 0.4 to 3 mm. Feed ruler 700mm long. Pre-milling. Touch screen. Glue container. Selling due to replacement with a new machine. Net price

Condition: new, Year of construction: 2025, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us. Dslq Nkeia Ta Hsaceut

Condition: used, CATALOG NUMBER 7643 ADVANTAGES – German production – original DTR documentation – Vacum pump – 3 units – used grinder, perfect condition Technical data: - max. width of the processed element 1350mm - max. height of the processed element 160mm 3 units: 1) grooved metal roller for calibration 2) grooved rubber roller smooth metal roller + pneumatic shoe 3) 2 smooth metal rollers + sequential shoe with a jump – from above: Dslq Nkjwgdg Ioaceut - 1 rubber roller, sliding - unit - 1 metal roller, sliding - unit - metal roller, sliding - unit - pressure with sliding roller - 2 cleaning brushes – from below: - feed roller, metal, slipping - pulling belt - 2 metal, slipping outfeed rollers - pneumatic belt oscillation on photocells - electric table lifting - lifting motor 0.55kW - smooth feed speed regulation 3-15m/min - feed motor 2.2kW - pneumatic brakes - total power 48.7kW - vacuum pump 3kW - working pressure 6-8bar - diameter of the extraction nozzle 3x85mm, 1x81mm, 4x120mm - total dimensions length/width/height 3070x2300x3030mm - weight approx. 4000kg Net price: PLN 47900 Net price: EUR 11270 Net price calculated according to the exchange rate of PLN 4.25/EUR (at In case of larger exchange rate fluctuations the price may change)

Condition: good (used), Year of construction: 2012, Functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Duolq Nkaewhlkwscet Connection for briquette press with air recirculation

Condition: excellent (used), Friulmac FN3 formatting feeder Working length min/max 250-2000mm Working width min/max 20-160mm Working height min/max 10-80mm Disc diameter 2x400mm Saw motor 2x3kw Diameters of extraction pipes 2x fi80mm Hydraulic pump motor 1.5kw Duelq Nkewgc Ecsacjt Adjustable speed 0-50 pcs/min Possibility of direct feeding to a four-sided planer Dimensions 2950x1200x1600mm Weight approx. 1000kg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. Djlq Nst Dl U Eekacjut 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: used, Year of construction: 2022, Functionality: fully functional, feed rate Y-axis: 700 m/min, Log peeler CAMBIO 45 AIR TEN. The peeler is sold after a major overhaul. Delq Nkaotcu Uascsut 4. Bark conveyor. 5. Centering conveyor. 6. Log peeler CAMBIO 75, knife system CAM TOOL. 7. Additional rollers after the peeler.

Condition: new, Year of construction: 2025, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Delsia Ta Roq Nkacjut We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Complete set with accessories for Pallmann floor/parquet sanders. New and in original packaging. Can be inspected, shipping available. - Pallmann Spider - 1x additional weight 15 kg - 1x suction sleeve - Pallmann Cobra - Carriage for the Cobra - Pallmann single-disc machine UNO Duolq Nkov D N I Toacet - Pallmann Gecko Star - Pallmann short attachment for Gecko Star - Pallmann Gecko Flex - Pallmann transport case for Gecko Flex - Wolff pre-separator 50 liters Machines can also be purchased individually.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S Duslq Njuu Ntgekacot - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 1069, quill travel distance: 1,300 mm, turning diameter over cross slide: 600 mm, total width: 400 mm, total length: 2,300 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, Wood lathe/turning lathe from 1979 by Jos. Ackermann. Fully functional and in good condition, suitable for series production. Not in use for several years. Dslq Nkjwhlc Hoaceut It is located in the workshop of a medium-sized family business in the Augsburg area. If you are interested or would like more information, please call. Please contact us using the inquiry form here. Utz Carpentry

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Dujlq Njir Aq Tskacjt Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: reconditioned (used), Round wood debarker CAMBIO 45. Equipped with a AIR TEN rotor. Knife system CAM TOOL. The debarker will be sold after an overhaul. Djlq Neiqkldskacjut Can be sold as part of a debarking line.

Condition: new, Complete set of safety mats for a CNC machine, new and in original packaging. Includes all components required for the safe operation of a CNC machine. Very easy to install, can be installed by a trained machine operator. Overall dimensions: 5600 mm long and 1330 mm wide. Weight approx. 350 kg. Supplied with plug-in safety mats in the following sizes: - 3 pieces 1000 x 1200 - 2 pieces 750 x 1200 - 2 pieces 500 x 1200 - 6 pieces plug-in connection cables - 1 piece transition strip for the machine - 9 pieces aluminum cover profiles - 2 pieces middle zone connecting bars in yellow - 2 pieces outer zone connecting bars in black - 1 piece assembly instructions Unfortunately, we ordered the incorrect safety mats, and since these are manufactured goods, we cannot exchange them. In the last picture, we have assembled the reorder; it is for your convenience only. We are happy to ship the goods; the buyer bears the shipping costs. Duolq Nkjv T Na Ijacet