Condition: used, Iseli BS 5 sharpening machine Iseli EBW leveling machine Dobvbcswgh H Eor Hsut

Condition: good (used), Year of construction: 2006, Industrial extraction system GESCHA, type: EURO-SET professional system, mobile, year of manufacture: 2006 Dusbvbcrjv Sc H Ss Hot

Condition: used, Model making machines Including over 100 canvas belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Dsbvbcrewhqxae Hout Type: PS 1 Extraction connection diameter 80 mm Space requirement approx. 1000 mm x 600 mm x 1800 mm Weight approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Debvewhqprobcr Hjut Storage location: Customer

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Holzma HPP 350/43/43 panel dividing saw in good, fully functional condition. The machine will be in operation until the beginning of July and can also be inspected while powered up. Cutting length: 4300 mm Cutting width (program slide travel): 4250 mm Dusbvbcrov I S Aus Hst Roller rail (10-track element): 1 piece Roller rail (2-track element): 5 pieces Collets: 7 pieces 4 air cushion tables Technical specifications: Saw blade projection: 80 mm Saw carriage feed: forward 1-130 m/min, reverse constant 130 m/min Automatic cutting height adjustment; Angle clamping device, minimum clamping width: 0 mm; Maximum cutting width, complete cutting length Space required: 640 x 740 cm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Connected load for 13.5 kW HS motor: 20 kW CADmatic 4.1 Professional control system with 19-inch flat-panel display with touchscreen function

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information. Application Types Dusbjwgf Hcsvbcr Het Edge Banding

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, grinding height: 160 mm, 1. Calibration roller unit 2. Electronics shoe unit Dobvbswhqmwecr Heut 3. Electronics shoe unit Sturdy industrial machine for calibration, fine sanding, and paint sanding Approx. 60 Mirka sanding belts included

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 6,000 mm, overall weight: 2,600 kg, working length: 6,000 mm, working width: 180 mm, pressing force: 12 t, type of input current: AC, input voltage: 400 V, motor voltage: 400 V, hydraulic system: 5 kW, 3 x 400 VAC, 50 Hz, 14 A, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Debeu Axfcsvbcr Hout Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Duobvbcowhqw Nsr Hst Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Debvbcrswhqple Hjut Storage location: Customer

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, cutting length (max.): 4,400 mm, cutting height (max.): 80 mm, main saw diameter: 80 mm, power: 13.2 kW (17.95 HP), TECHNICAL DETAILS Usable cutting length: 4,400 mm Slider length: 4,300 mm Working height: 890 mm Cutting height: 80 mm Main saw cutting height: 80 mm Clamping jaw opening: 75 mm Clamping jaw closing: 1 mm Number of jaws: 5 Clamping positions: 68 – 368 – 1,168 – 2,168 – 3,168 – 4,168 mm Minimum package thickness for side shift: 12 mm Sawing technology Main saw motor: 13.2 kW / 50 Hz Scorer motor: 1.5 kW Main saw diameter: 330 mm Scorer diameter: 180 mm Feed speeds Saw carriage feed speed: 1 – 150 m/min Return speed of the Saw carriage speed: 100 - 150 m/min Table and transport elements Number of roller rails: 10 Number of air tables (2,000 x 510 mm): 4 Extraction Lower nozzle: 200 mm Debvbcswhqh Ier Heut Upper nozzle: 75 mm MACHINE DETAILS Voltage: 400 V / 50 Hz / 3-phase EQUIPMENT - GVision XP - Brushless saw carriage

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, height adjustment type: electric, MAGIC Recta 180 mm four-sided planer Specification: • condition - used, after inspection, ready to work • manufacturer - MAGIC • model - Recta 18 • working width - 180 mm • working height - 120 mm • motors on vertical spindles - 2 x 3.0 kW • motors on horizontal spindles - 1 x 3.0 and 1 x 4.0 kW • feed motor - 1.5 kW • total power 14.5 kW • electric planing height adjustment • manual planing width adjustment • 4 spindles equipped with heads for traditional knives • pulling roller before the first head • long introductory table with dimensions 20.5 x 250 cm Dusbewhpwnjvbcr Hot • 2 feed speeds (6 and 12 m/min) • roller pressure on springs • extraction nozzles fi 120 • soundproofed soundproofing cabin • weight approx. 1210 kg • year of manufacture - 1998 • dimensions 345 x 140 x 145 cm (length x width x height) • meets CE standards Additional information: • the machine is in perfect technical condition, ready for immediate use • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: good (used), Year of construction: 1992, Altendorf F 45 sliding table saw, built in 1992 Motor: 5.5 kW / 400 volts Cutting length: 2800 mm Debewhpngovbcr Hout Cutting width: 1000 mm Pivoting up to 45° Speeds: 3, 4, 5, and 6000 rpm Max. saw blade diameter: 450 mm Max. cutting height: 155 mm Parallel guard Fine adjustment on the parallel stop Miter stop 800 mm aluminum table extension

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 / Dujbvbcrowhpcqs Het

Condition: used, Year of construction: 1986, From a model workshop Used, excellent condition, little used Make: Panhans Type 426 Year of manufacture: 1986 Machine No. 670 GS-tested Powered motor: 7.5 kW Planing width: approx. 630 mm Planing height: approx. 250 mm Adjustable table guide rollers Linked pressure beam Steel feed roller Feed rate: 7-14 m/min Number of knives: 4 Knife system: Strip planer knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection diameter: 160 mm Space required: approx. 1200 mm x 1000 mm x 1400 mm Weight: approx. 1150 kg Dsbvewhqw Asbcr Hjut Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 1998, Working width: 500 mm Speed: 5,000 rpm Maximum chip removal: 8 mm Suvamatic cutter block guard Weight: approx. 1,000 kg Dimensions: 2,850 x 850 x 1,110 mm Djbowhqn Usvbcr Heut Storage location: Supplier

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 11470, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Dobvswhpavebcr Hout

Condition: reconditioned (used), Functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Dsbvbcrewhn T Uo Heut

Condition: excellent (used), Year of construction: 2014, operating hours: 4,335 h, Functionality: fully functional, machine/vehicle number: W09B07235EESD1312, cutting length (max.): 7,000 mm, total length: 10,000 mm, overall weight: 3,200 kg, type of input current: three-phase, height adjustment type: electric, wheel diameter: 120 mm, workpiece weight (max.): 3,500 kg, total height: 260 mm, total width: 250 mm, saw blade width: 120 mm, cutting width (max.): 130 mm, Serra Bavaria SL 130I 7 Owner operator since new 2014 Mobile sawmill can be towed although we've had it as a stationary. Blade sharpener, blades, spare parts, log lifts all included Very good condition and fully serviced by Serra. Weight: 3200kg Engine power 18.5kW Dsbowhn Hzovbcr Heut Log throughput 1300mm Drive e Saw type B Log length 7m Passage 1300mm

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. Djbvbcrjwhn T Is Hsut High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters.

Condition: used, Year of construction: 1977, Heavy-duty disc sander Model making machine Including approx. 20 sanding belts K 80 Used, excellent condition, little used Make: Zimmermann Type: SZ 1 Year of manufacture: 1977 Motor: 1.7 kW Right table: approx. 800 mm x 280 mm Tilts 30/45° Left table: approx. 800 mm x 280 mm Tilts 30/45° Double-sided Disc diameter: 600 mm Extraction connection: D 2x120 mm Space required: approx. 920 mm x 750 mm x 1300 mm Weight: approx. 500 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition, as seen Without warranty or guarantee Duebvswhqwvjbcr Hot

Condition: good (used), Year of construction: 1994, Functionality: fully functional, FOR SALE HUNDEGGER P10 Dsbvswhn A Nebcr Hjut ROOF STRUCTURE PROCESSING MACHINE. THE MACHINE IS IN GOOD CONDITION, IT WORKED UNTIL IT WAS DISASSEMBLED AND DRIVEN TO THE LOCATION WHERE IT IS WAITING FOR A NEW OWNER. IT WAS TAKEN OUT DUE TO THE ARRIVAL OF TWO NEW MACHINES FROM THE SAME MANUFACTURER. THERE ARE MANY NEW SPARE PARTS THAT ARE NOT INSTALLED. THE PRICE IS NOT FIXED AND CAN BE NEGOTIATED UPON ARRIVAL AT THE LOCATION DURING THE INSPECTION OF THE MACHINE

Condition: new, Year of construction: 2020, Output: 10 layers/min. Thickness min./max. 17-120mm Width min./max. 70-280mm Log length: 2.5-7.2m Fully automatic stacking machine Cross conveyor Drive-over separator Quality conveyor Dusbvewhnybsbcr Hst Cross-cutting Stacking machine Automatic batten placement Package conveyor

Condition: excellent (used), Year of construction: 2009, operating hours: 1,000 h, Functionality: fully functional, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, total width: 10,000 mm, total length: 10,000 mm, total height: 10,000 mm, working height: 10,000 mm, working width: 10,000 mm, pressure plate depth: 10,000 mm, workpiece weight (max.): 10,000 kg, pressing force: 10,000 t, working range: 10,000 mm, space requirement width: 10,000 mm, space requirement length: 10,000 mm, space requirement height: 10,000 mm, overall weight: 10,000 kg, cylinder stroke: 10,000 mm, height adjustment type: pneumatic, power: 11 kW (14.96 HP), compressed air connection: 8 bar, Nico Duin tenoning machine 5 axles 1 saw, 2 peeling heads, 1 long axle, 1 short axle Pneumatic material clamping Automatic table The long axle is equipped with OMAS tools. These are incl. See photo: the drawing. Additional OMAS tools at an additional cost. Asking price tenoning machine: € 8,500 (excl. VAT) Due to the purchase of a machining center, this tenoning machine has become redundant, from week 27 2025. Preferably pick up in week 27 or earlier or later in consultation. Machine functions properly and is well maintained. As can be seen in photos, there is also a video available. Dujbswhnqgovbcr Het The tenoning machine is still in use as long as the machining center is not there yet. It can be seen working. It is best to call for more questions about the machine or to come and see us. Also for sale: Select Ventilation slot milling machine 60200.

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Dobjvxlq Hsvbcr Hsut Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee