Machining center with throughfeed

Hundegger K2

Year of construction: 2006, condition: ready for operation (used), Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details. • Condition/use: Good condition; regularly maintained; used only in own operations; no multi-shift operation • Color: RAL 5012 blue • Capacity: • Maximum log length at infeed: 13 m • Maximum log length at outfeed: 12 m • Installed working units: • Under-table swivel crosscut saw • 4-axis universal milling unit UF4 • Roller cutter • Finger cutter • Dovetail cutter • Combination support for vertical tools • Drilling unit 2.2 kW • Drilling unit 3.0 kW (reinforced) • Combination support for horizontal tools Dusdpfx Aoza A Ddeh Nsu • Additional drilling unit 2.2 kW • Slotting unit • Marking unit Additional equipment • Infeed cross conveyor, 5 horizontal strands, 2.2 m, with flat belt chain • Infeed strand with shaft extension • Extension stand with feed mechanism • 6-arm discharge table • Fully automatic pneumatic beam turning station • Finished wooden support surfaces • Label printer

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, overall weight: 5,000 kg, input current: 44 A, table width: 1,200 mm, table length: 2,700 mm, The compactor is designed to compact the bottoms and tops of pallets. After one cycle one pallet is nailed. Nailing is carried out mechanically. The machine automatically takes nails from the storage bins, where they are in bulk. The pallet components are taken from the external magazines by two people . The XP 1000 nailing machine is designed to produce industrial pallets in the 800-1200/1200-2600 size range . The nailing cycle is adjustable from the control panel , takes a minimum of 10 seconds . Hammer plates adjustable on the full range of hammer . Dujdpfst Tyn Sox Ah Neu Standard equipment of the nailing machine includes 16 hammers on eight plates and one set of 800/1200 pallet molds . Other molds on request for an additional fee . The performance of the machine depends on the workers and their speed in stacking the parts.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked. Djdpfezb I Iwox Ah Njuu

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Dedpfx Ajzbnkfsh Nsuu Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Dujdsx Af Rdspfx Ah Nsu Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: good (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 7105, feed length X-axis: 16,500 mm, feed length Y-axis: 1,300 mm, workpiece weight (max.): 1,000 kg, cutting height (max.): 300 mm, total length: 45,300 mm, total height: 5,700 mm, cutting width (max.): 1,300 mm, total width: 16,800 mm, control cabinet width: 730 mm, saw blade diameter: 800 mm, overall weight: 31,000 kg, control cabinet length: 4,500 mm, control cabinet height: 2,500 mm, working length: 20,000 mm, working width: 13,000 mm, Equipment: safety light barrier, HUNDEGGER K2-Industry 1300 fully automatic sizing machine, consisting of: 1 ABM-I125 1 K2-Industry 1300 basic equipment, including: - Saw unit 13 kW - Automatic beam turning station - Control panel and switch cabinet - Safety devices 2 ROB-2500 1 Hundegger production program CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning device "Two-hand system" - with servo drive in the positioning carriage 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance Base machine price 7 ABM-1232 1 Machine frame K2-Industry 1250 - special length - price per meter 8 ABM-1816 1 Extension and encapsulation - Machine enclosure including preparation for dust extraction 9 ABM-2151 1 Infeed cross conveyor and infeed roller conveyor for max. wood length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-cut components 11 ABM-2851 1 Rough wood holder in front of the universal saw (multi-length processing) 12 HH-8501 1 Adjustable safety impact plate - infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Revolving milling unit - vertical (installed from above) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combined support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic - drilling direction vertical 18 ABM-5400 2 Vertical finger milling cutter 5.5 kW 19 ABM-B61 1 Combined support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW - drilling direction horizontal 21 ABM-5220 1 Pivoting drilling unit 45° (3.0 kW) - drilling direction horizontal 22 ABM-5751 1 Slotting cutter 7.5 kW - on the stop side 23 ABM-5500 1 Longitudinal and transverse groove milling cutter 24 ABM-5776 1 Slotting cutter 7.5 kW - on the operator side with pre-positioning (Y-axis) 25 ABM-4101 1 Double combined support - (on the stop and operator side) 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combined support 27 ABM-6000 1 Marking device at the rear (on the stop side) 28 ABM-6040 1 Marking device at the front (on the operator side) 29 ABM-6100 1 Marking and labeling device at the bottom 30 ABM-6180 1 Marking and labeling device at the rear (on the stop side) 31 ABM-6300 1 InkJet 4 system HP - on the stop side 32 HH-8610 1 Label printer at the control panel 33 ABM-2900 1 Wood removal hood = flap for removing short components on the under-table swiveling miter saw 34 HH-8640 1 Additional cost for a mobile control panel on rollers 35 HH-8645 1 Direct control of planing machines 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional wood storage point 38 ABM-8300 1 Feed roller from above 39 ABM-8416 14 Extension roller conveyor with adjustable rollers, max. width 1300 mm 40 HH-8521 1 Adjustable safety impact plate - discharge roller conveyor 41 AH-9001 2 6-strand transfer cross conveyor with wide flat belt chain HUNDEGGER Pick & Feed System designed for the following workpiece dimensions: Length: 2,000 - 15,000 mm Width: 100 - 680 mm Thickness: 60 - 300 mm Max. part weight: 400 kg Performance max.: 1 cycle in 1.5 min Stack dimensions: Length: 2,000 - 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with suction gripper Dujdpjza Ehrsfx Ah Neu Pos. 3 Spacer rack Pos. 4 Safety technology Pos. 5 Stack pattern input aid Pos. 6 Increase max. workpiece weight to 1000 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: K2, cutting width (max.): 650 mm, type of input current: three-phase, Equipment: safety light barrier, The machine consists of: - 5-axis milling unit - Saw unit with 700 mm blade - Horizontal drilling unit for beam drilling - Automatic reference marking system for assembly positioning - Circular saw residue extraction system Djdpfey Ruhdsx Ah Njuu - Automatic loading system - Automatic unloading system - Automatic beam rotation system - Maximum workable dimensions: 640*260*16000 mm The tools included with the machine are: - Universal cutter head 350x100 - Disc cutter 350x40 - End mill 50x200 - End mill 30x230 - Drill bit set for drilling unit - Dovetail cutter for beam joinery The onboard PC has been recently replaced and all regular maintenance has always been performed using original spare parts.

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Duodpshlp Efjfx Ah Nou

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts Dedpfjyaq Dxjx Ah Njuu

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Duedpjwuppwjfx Ah Nou Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Dujdpfxsvryhgj Ah Neu

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Djdpfx Ahjww Nuxo Neuu

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. Djdexx T Rdjpfx Ah Nsuu We offer disassembly and installation for €10,000.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Dusdpfxewxdime Ah Neu Tilting trough for long timber. Spare parts.

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine Dusdjxtxkxopfx Ah Neu K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.