Condition: new, - 7.5 kW (10 HP), 3 speeds - Motorized height and tilt adjustment Dolqowh Um Ue N Nugecg - Large protective hood - Double sliding table 3,200 mm - Scoring tool preparation - Parallel stop, cutting width 1,000 mm - Miter stop 3,450 mm, without length compensation - Table top extension/widening: Powder-coated surface Further options available upon request!

Year of construction: 2025, Condition: new, Brush ageing machine Valmec 600 working width 600 mm feed speed 4-12 m/min motor power 2 x 4kw Dcelsgk T Etsq N Nugjg two brushes in set, wire + tynex independent height adjustment of brushes power supply 400V machine new

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0-200-24-1105, total length: 10,825 mm, edge thickness (max.): 20 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 310/7/A20 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2010 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL84, 2 motors, with straight/chamfer cutting function - Pre-milling (rough trimming) 1,15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with several exchangeable trimming heads - Profile (radius-) scraping with exchangeable tool heads - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Buffing unit top/bottom ELECTRONIC CONTROL: - powerControl PC 22 OPERATING SYSTEM - woodCommander ANNOTATION (1): The machine has been partially reconditioned and serviced in June 2014. Top pressure belt and glue roller drive are new, glue application unit has been completely reconditioned and freshly teflon-coated, guillotine all new seals, guides and new knives, edge transport rollers new, wear & tear parts in snipping, corner rounding, scraping and buffing units are new ANNOTATION (2): Included in scope of delivery are: Dcolq Nowh T Rrj Nugsg - 1 additional glue application unit (teflon-coated) - Glue unit service station ANNOTATION (3): The return conveyor system (LIGMATECH) as it can be seen in the pictures is not included in the scope of delivery.

Condition: new, Year of construction: 2025, Functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Dcolqswh T Dle N Nugsg Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: used, Year of construction: 2015, Workpiece thickness max: 300 mm Crosscut height: 300 mm Aggregates total: 5 Positioning cart: 2 Number of sawing aggregates: 1 Drilling aggregates: 2 Vertical drills: 1 Horizontal drills: 1 Number of milling aggregates: 2 4-side milling aggregate: Yes Dcelqjv Upaqj N Nugog 5-axes technology: Yes Main motor power: 11 kW Birds mouth cutting unit: Yes Shark cutter: Yes Scribing: Yes Saw for shifter cuts: Yes Flipping device: Yes Workpiece feed: Log carriage

Condition: used, Price: On request Industrial hoover Brand: Kiekens Type: TURBO J7 + CAST Year built: 2008 Reference number: 008323000 Motor: Delq Nowg En Ho Nugecg Mains voltage: 400V Frequency: 50Hz Motor power: 11KW Power consumption: 7,7KW Air displacement: 910 m3/h Fuse: 32A (gl). Overall dimensions: 2540mm X 1560mm X 3200mm (LxWxH) - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, - 5.5 kW (7.5 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table, 3,200 mm - Scoring unit with LED lighting - DIGIT X parallel stop, cutting width 1,000 mm - 3,450 mm angle miter stop, without length compensation - Table top extension/widening: Powder-coated surface Dcjlq N Nowh Um Iougeg Further options available upon request!

Condition: new, Year of construction: 2025, Valmec Master 400 brush scaler working width 400 mm maximum working height 300 mm Dcslq N Nuegmm Saegjg motors 2 x 3 kw conveyor belt with speed regulation on the inverter steel brush + tynex brush included suction pipes 2 x 100 mm independent height adjustment of aggregates dimensions: 1300x900x1600h mm machine weight 500 kg

Condition: excellent (used), Fully functional veneer press from Höfer Deljwh S Tlsq N Nugscg Panels: 250x125cm Heating plates: 2x 7.5kW

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 019, saw band length: 5,480 mm, saw band width: 20 mm, cutting height (max.): 120 mm, saw band speed: 29 mm/s, Band Saw Veneta Macchine Papper 2008 Wheel diameter 800mm Maximum cutting height on feed 160mm Cutting saw width 13-20mm Saw thickness 0.6-0.8 mm Djlewh S Ehsq N Nugocg Saw speed 29 m/s Material feed Motor power 5.5kw CE certificate

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Dslq Nsikvl Ro Nugscg Full bottom floor for waste handling All electrical cabinets and hydraulics

Condition: ready for operation (used), Year of construction: 2004, Functionality: limited functionality, machine/vehicle number: C 63092, power: 11 kW (14.96 HP), input current: 26 A, Used until the very end. Replacing small parts, adjusting Delewh S A Hsq N Nugjcg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AL1/004666, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,018 mm, travel distance Z-axis: 200 mm, controller model: Windows XP, overall weight: 2,800 kg, Machine will be loaded free of charge! TECHNICAL DETAILS Operating system: Windows XP with 15" CRT color screen & Intel Celeron 2 GHz Travel paths and working areas X-axis Travel path: 2,650 mm Electric mandrel working area: 2,903 mm Horizontal drilling heads: 2 (64 mm spacing) Disc milling unit (X-direction): integrated, 4,000 rpm, 2.2 kW, Ø 120 mm Y-axis Travel path (vertical drilling area): 1,018 mm Electric mandrel working area: 1,240 mm Horizontal drilling heads: 1 Z-axis Travel path: 200 mm Panels Max. panel size (double-station machining): 1,180 mm Max. panel thickness: 180 mm Speeds X/Y travel speed: 54 m/min Travel speed Z: 11.5 m/min Milling unit (electric mandrel) Spindle type: HSK 63 Power: 7.5 kW Speed range: 1,500 – 24,000 rpm Tool holder: HSK 63, straight tool holder Tool magazine (type R8L): 8 positions Max. tool diameter: Ø 120 mm Max. tool weight per holder: 4.5 kg Max. total weight (tools + holder): 22 kg Horizontal milling unit (2 outputs) Speed range: 9,000 – 18,000 rpm Motor power: 3 kW (4 HP) Front tool: Ø 20 mm, length 110 mm Rear tool: Ø 12 mm, length 80 mm Circular saw blade: Ø 100 mm Drives and power Main spindle power: 2.2 kW (3 HP) Main spindle speed: 4,000 rpm Spindle mount: M10 EQUIPMENT - 12 vertical drilling spindles (7 in X, 5 in Y) - 4 panel support tables, each 1,000 mm long - 2 additional universal supports, 25 mm high - 8 automatic round vacuum cups with aluminum bodies (2 per table) - 4 vacuum cup holders for contour machining - Vacuum pump with 100 m³/h capacity - Vacuum conveyor - Automatic central lubrication for X and Y axes Dcjlqewh Syxs N Nugjg - Pneumatic loading aids for 1,000 mm tables

Condition: new, Year of construction: 2006, SCM FS410 planer and thicknesser, in mint condition - never used, only test planed a few times! TERSA cutter block Working width: 410 mm Maximum planing height: 240 mm Total worktable length: 2050 mm Planer stop dimensions: 1100 x 170 mm Planer stop inclination: 45° Crebqewhrt Sexd Ddvob Dcelq N Nowh Sw Reugeg Cutter block speed: 5000 rpm Cutter block diameter: 120 mm Thickness feed rate: 6-12 m/min. Spiral steel feed roller Rubber feed roller Quick conversion system from planer to thicknesser in one go Mechanical digital display for thicknesser Glide rollers in the thicknessing table Motor power: 5.5 kW - Automatic motor brake Feed motor 0.55/0.75 kW Working height: 830 mm Extraction hood diameter for planer: 120 mm Extraction hood diameter for thicknesser: 120 mm Approx. weight: 700 kg Operating manual Price is net plus VAT

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, spindle speed (max.): 18,000 rpm, Long-Bed CNC Lathe – High-Precision Cylindrical Carving The CNC lathe with numerical control is the ideal solution for machining cylindrical wooden parts, offering an excellent blend of automation, precision, and efficiency. This high-performance machine compensates for the lack of skilled labor, ensuring perfect repeatability and maintaining the same dimensions and quality for every part produced. Perfect for long and detailed processing With a working length of up to 2400 mm, the lathe allows for the creation of elements such as balusters, columns, table legs, decorative pieces, or church furniture components – all carved from a single piece, with no joints. Its robust design and welded frame made of thermally treated rectangular profiles ensure long-term stability and precision. High-quality components for consistent performance Professional linear guides (HIWIN) on X, Y, and Z axes: smooth, vibration-free movement Hybrid servo motors: precise control of speed and positioning Rack-and-pinion drive: efficient and accurate axis movement Water-cooled motors: operate up to 18,000 rpm without overheating Self-centering chucks and adjustable tailstock with cylindrical guides: secure grip for various part sizes Smart control and simplified operation The DSP system with internal memory allows fast file import via USB and automatic project resume after interruptions. It includes advanced calibration functions, zero-point setting, and speed adjustments, offering full production flexibility. Built for durability and energy efficiency Optical sensors: maintain accurate axis positioning Automatic lubrication pump: easy maintenance and extended machine life Low energy consumption: meets modern energy efficiency standards Key Benefits ✔ High accuracy and repeatability ✔ Long-part machining with no joints ✔ High efficiency, reduced costs ✔ Versatile for furniture, decorative, and specialty part production The long-bed CNC lathe is the ideal choice for workshops and factories seeking top-tier performance, versatility, and consistent quality in wood processing. Maximum Working Length 2400 mm Maximum Working Diameter (Ø) 400 mm Number of Working Units 1 Control System DSP Dolq N Nujwh Sc Hegjcg Workpiece Rotation Speed 0–2500 rpm Spindle Motor Power 4.5 kW Spindle Speed 18,000 rpm Inverter “BEST” inverter Drive Motors Hybrid Servo Motors Maximum Feed Rate 50 mm/s Precision 0.0125 mm Power Supply 400 V – 3 Phase – 50 Hz Technical Support Available In Romanian, English, German

Condition: used, Year of construction: 2008, machine/vehicle number: 2008.01.161, grinding width: 1,350 mm, HEESEMANN MFA6 Wide Belt Sander Sanding width: 1350 mm Workpiece height: 3 – 150 mm Working height 880 mm Feed speed 3-15 m/min Aggregate: Dcolq N Nujwh Scyegog 1 x 15 kW transverse sanding aggregates; (belt 4350x140) 2 x 15 kW longitudinal sanding aggregate with 15 kW pressure lamellar belt; (belt 1900x1380) 1 x 2.2 kW brush-roller unit; 1 x 0.75 kW brush-roller unit; Total connected power: 63 kW Dust extraction total air demand: 195 m³/min Compressed air total air demand: 188 m³/h Dismantling on the Buyer's side

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, saw blade diameter: 700 mm, Randek SPL728 cross-cut saw, used. Year of manufacture: 2008. Description: German. Location: Falkenberg, Sweden. Technical specifications: Feed direction: Left to right. Infeed table: 4 meters. Outfeed table: 5.8 meters. New PLC and computer - 2025. Fully serviced by Randek. The SPL728 cross-cut saw is effective, easy to use, and precise. It has been on the market for a long time and is constantly being improved in close cooperation with our many customers. The saw blade of this semi-automatic saw supports both angle and bevel cuts, allowing it to perform any desired cut. The large diameter of the saw blade also allows you to cut multiple sections of stacked wood at once. Bevel cuts from 0° to 360°. Bevel cuts from 90° to 28°. Cutting heights up to 250 mm; three boards can be cut per cutting cycle. Computer-controlled, allowing for quick adjustment. Wood is secured close to the cutting area for a precise cut. The software. The saw is equipped with an industrial PC with a touchscreen that displays automatic calculations and adjustments. You can monitor the sawing process and always know which cut you are at in each piece. You can create your own cutting data or simply import complete projects from market-leading 3D programs for house and roof truss design. Dcelovw Tg Hoq N Nugeg Since the software was developed in a Windows environment, the operating system makes it easy to integrate the saw into the company network, enabling network transfer of the projects being processed. CUT SAW SPL728, used. Year of construction: 2008. Description: English. Location of machine: Falkenberg, Sweden. Technical specifications: Feeding direction: Left to right. Infeed bench: 4 meters. Outfeed bench: 5.8 meters. Randek chop saw SPL728, used. Year of construction 2008 (Description German / Description English) New PLC and computers - 2025. Full service done by Randek. The SPL728 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports both angled and inclined cuts, which means it can make any cuts you may require. You can also use the large diameter blade to cut several sections of stacked timber simultaneously. Angled cuts from 0° to 360° Inclined cuts from 90° to 28°. Cut heights up to 250 mm, possible to cut three boards each cutting cycle. Computer controlled, resulting in fast adjustment. Fixation of timber near the cutting area resulting in accurate cutting. The software. The saw is equipped with an industrial PC with a touch screen that displays automatic calculations and changes. You can follow the saw process and always know what cut in which piece you are. You can create your own cut data or simply import complete projects from market-leading house and truss dimensioning 3D programs Since the software is developed in windows environment, the operating system makes it simple to integrate the saw with the corporate network, allowing for network transfer of the projects scheduled to be done.

Year of construction: 2010, operating hours: 1 h, Condition: excellent (used), Wemhoner line laminate three-dimensional components with thermoplastic foils, veneers and other deformable materials. They enable the production of furniture fronts with glossy surfaces, deeply textured designs and curved fronts. Many of these vacuum press lines incorporate the patented VarioPin® system. Press line composition: - automated foil roll loader; - a table for laying out parts and covering with film; - mebrane press; - turning and cutting table for parts; - glue cleaning line. Delq Njv Nzv Tj Nugocg

Condition: used, Functionality: fully functional, Lot consisting of Classic Vis 450/TU Cutting Machine with MG4 Suction Tube Delq Njwh R Smj Nugecg NOTES FOR COLLECTION: - maximum expected time for carrying out collection activities from the agreed day: 1 day

Condition: used, machine/vehicle number: 007789, Max. panel width: 920 mm Max. panel length: 3000 mm No of Top Units: 2 Positioning of Units by NC: yes Dcjlq N Novzc Syjugog Lateral horizontal groups: yes

Condition: good (used), Paul KME Multisaw-Edger Dcolq N Nowg Amgeugjg Material input width 500mm Cutting height 120mm 1 mobile saw Main engine power 18.5kw

Condition: used, Year of construction: 2007, working width: 1,350 mm, CEFLA painting line with HEESEMANN sander Dcelqswh R Sts N Nugsg 1- Hessemann MFA6 sander 2008 (no. 2008.01.191) Cross belt + 2x rollers + feet + 2x brusher 2- belt conveyor on rails (work without sander possible) 3- TNS 1500 belt conveyor 4- VS33/ACT-F series 2000 brusher 5- ES/IRM + TTE1500 6- EASY2000/D painting machine 7- HOOD brushers + FEVS3/4 NIR + FEVEU2/5-IRM 8- TT14500 drying tunnel 9- TNS 1500 belt conveyor 10- TRC 1000/125-A roller conveyor 11- Rollers SMARTCOATER SP1 12- UV2000 IC MR + CRIM + TTE5850/SCR lamps Disassembly by the customer Net price given

Condition: ready for operation (used), Year of construction: 2006, 1. tool holder - lower Nobq Up Nusuzaa Sj Docp Brake motor: 5.5 kW Spindle diameter: 40 mm Speed: 6000 rpm Tool circumference: 93 - 160 mm Axial adjustment range: 5 mm Folding device MarathonCoatin for table insert in front of 1. lower tool holder 2. tool holder - PowerLock - right Brake motor: 11.0 kW Common motor with left tool holder Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for simple milling heads max. 163 mm Max. tool diameter behind the limiting plane: 180 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 3. tool holder - PowerLock - left Brake motor: common motor with 2nd spindle Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for straight milling heads max. 163 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 4th tool holder - PowerLock - upper Brake motor: 7.5 kW Speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC radial controlled spindle 5th tool holder - PowerLock - upper Brake motor: 7.5 kW Speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC controlled spindle axially and radially 6. Tool holder - PowerLock - lower Dcolq Nowavgte Nugjg Motor with brake: 7.5 kW Rotation speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. forming depth: 15 mm Axial adjustment range: 35 mm CNC controlled radial spindle Feed system Feed controlled frequency, stepless with brake: 4 kW, 5 - 30 m min The machine is connected, it only worked in pine wood.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. The press is fully functional and in constant use. The press is fully functional, in constant use. Delqswh R D As N Nugocg

Condition: used, machine/vehicle number: 007949, Max. panel width: 3100 mm Max. panel length: 3100 mm Dcsljwg A Absq N Nugjg Main saw blade projection: 55 mm No of Grippers: 4