Condition: ready for operation (used), Brand: RGA Italcava Model: SM500 Produced in Italy - For example, to mill lock cases Tech. info: Max working height: 850 mm Max stroke, manual up/down: 180 mm Manual feeder right/left Pneumatic material clamp: 1 pcs. Motor: 2,2 kW (3Hp) Power: 380V, 50Hz, 3-phase Size: length: 120 cm width: 80 cm Dolip Tjh Icaho Dtskl height: 190 cm weight: 200 kg

Condition: good (used), Reasaw Stenner Type:Stenner VHM 36 Saw line including lifting tables ,infeeding conveyor, reasaw Stenner 36,outfeeding conveyor 7m Toatal lengt approx. 12 m Tech. info: Reasaw Stenner Bandsaw wheel 36´(900mm) Saw blade width 75, 90, 100mm Fence to saw blade 250mm Feed roll to saw blade 250mm Max cutting hight 400mm Motor 15 Hp, 400 volt, 50 Hz, 3 phase Hydraulic lifting table: Brand: Hymo Capacity: 4000 kg Work table size: 3500x1400 mm Hydraulic lifting table size:1200x900mm Delip Teqzh Nwo Dtskl Input conveyor: Length: 4200 mm Width of roller: 500 mm Outfeed belt conveyor 8000mm Stock no:2001941BXM

Condition: ready for operation (used), Brand: Omga Model: 600 P3S Machine no: 182734 Tech. info: Blade diameter: 350 mm Cross Cut capacity: 600 mm Cast iron arm Delior Nu Dujp T Dtskl Brake Infeeder roller conveyor: 3000 mm Outfeeder roller conveyor: 2000 mm Motor: 4 hp, 50 H, 380 V, 3-phase Stock no: 2002063

Condition: ready for operation (used), Brand: Morbidelli Machine no: 6062 Year of manufacture: 1986 Tech. info: Number of spindles: 35 pcs Work table size: 1250x320 mm Spindle center distance: 32 mm Max distance between outer spindle centers: 1088 mm Drilling depth: 70 mm Motors: 2.2 kW, 2.2 kW, 50 Hz, 380 V, 3-phase Motor for raising and lowering: 0.37 kW Size for transport: 150x90x165 cm Weight: 710 kg Stock no: 2001865BXA Dslip T Derigrtstokl

Condition: good (used), Year of construction: 1970, Brand: Friz Model: LAK Year model: 1970 Tech data: Roll width: 1300 mm Diameter roll: 170 mm Delorit E Noip T Dtekl Height adjustment: 0-100 mm Motor: 0.75 kW, 50 Hz, 380 V, 3-phase Size for transport: 200x80x155 cm Weight: 750 kg

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Delip T Deriutkstekl Stock no: 2001355

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Dkjlisrz Irrjp T Dtol Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: ready for operation (used), Year of construction: 1995, Brand: Levigaltecnica Model: Perfect SRRN 1100 Machine no: 1663 Year of manufacture: 1995 Tech info: Working width: 1100 mm Sanding belt width: 1130 mm Sanding belt length: 2150 mm Min/Max working thickness: 3 / 160 mm Minimum length of workpieces: 280 mm Work table height: 900 mm Power of 1st and 2nd motors: 12.5 - 12.5 HP Feed motor power with gear motor: 1.6 / 2.2 HP Dsljvhah Soip T Dtekl Feed speed: 18 / 16 m/sec Motor power for thickness adjustment: 0.5 kW Hardness of rubber rollers: 85 SH Diameter of rollers: 200 mm Air flow capacity: 6000 m³/h Minimum pressure of compressed air: 5 bar Motor: 24 kW, 50 Hz, 380V, 3-phase Weight: 2500 kg Stock number: 2002382BXM

Condition: used, Year of construction: 2006, Brand: Costa Model: TT1350 Serial no: A60314LL2 Year of manufacture: 2006 Stock number: 2002436BXA Technical data Djlip Tev Hbago Dtskl Working width 1350 mm Sanding belt size 1380x2620mm Power:400volt, 50 Hz, 3 phase, 32kw, 65 Amp 1. sanding unit 1 sectioned sanding shoe 2. sanding unit 2 sectioned sanding shoe 3. cleaning brush 4. airblast cleaning 5. Vacuum

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Dkjlipjvw Tnks T Dtol Machine no: 9709021 Year of manufacture: 1997

Year of construction: 2001, Condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Dsliofw Nc Uop T Dtskl Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Year of construction: 1995, Condition: good (used), UV putty roller Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7250 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 400V, 50 Hz, 3-phase Size for transport: Dkslipeg E Uf Ss T Dtol 2850x900x2200 mm Weight: 1450kg Stock No: 2000353

Year of construction: 2012, Condition: good (used), Brand: MC Model: LI-2DISC Machine no: 125/12 Year: 2012 Tech data: Working width: 1090mm Dimensions of rolls: 1050x70mm Roller speed: 40-650rpm Speed: 0-13m/min Motor: 5kw, 50Hz, 400V, 3-phase Motor for rollers: 0.75Kw, 50Hz, 400V Machine dimension (lxwxh): 2200x1600x2100 Dkelip Tspbcais Dtel Weight: 1280Kg Stock no: 2001696

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Dolip T Dsq Ehpastskl Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Dkolip Terbyrpe Dtel Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: like new (used), Brand:Waco Type:KS300 Djloh Ek N Asip T Dtokl Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Dkolioth R Tlsp T Dtol Size for transport: 320x110x145 cm Stock no: 2002056

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Nailing machine Brand: LG Machine (Swedish) Year: 2002 Assembly nailing machine full automatick, high cpacity, stacking output. Normal wear, chains and sprockets changed a couple of years ago Techn info: Capacity pallet 800x1200mm approx. 600/day Dimensions of finished pallet Min-max: 60x80mm, 120x160mm Thickness of boards: 16,19,22,25mm Width of wood plank min-max 70-150mm Dkelip T Djua A T Aotsl Number of nail pipes 6, mechanical Loose nail dimension 80, 90 mm Saw machine (4 saw blades) for cutting the corners Total dimension/set up approx: 15x7m Price: ask for offer

Condition: ready for operation (used), Year of construction: 1986, Brand: Hansen & Hundebol Model: 300/AUT1000 Year model: 1986 Tech. info: Working width: 1040 mm Max brushing height: 100 mm Work table length: 1720 mm Brushing roller: diameter: 180 mm Shaft length: 255 mm Shaft diameter: 33 mm Manual adjustment of work table Main motor: 4 kW, 50 Hz, 380V, 3-phase Dkelipsrfxr Hj T Dtol Stock no: 2001993

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m Dkolip Tsipx Aio Dtjl 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Delip T Devwkrgetokl Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Condition: ready for operation (used), Brand: Bacci Model: Brevettata SM 787 The work table can be tilted and is adjustable in height. Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Djlip T Detu Ivnotskl Size for transport: 160x120x145 cm (lxwxh) Weight: 800 kg Stock no: 2002057

Condition: like new (used), Year of construction: 2022, Brand: Salvamac Model: Classic 50/Salvastop 5.4m Year model: 2022 Tech data Fast cutting saw: Dkolipetxmnqe T Dtsl Output path 4+2m Blade diameter: 500mm Spindle rotation speed: 2800v/min Table height: 900mm Cutting time adjustable from the outside of the machine The movement of the blade is pneumatic Air pressure: 6-8bar Variable setting of blade speed Engine: 5.5 Kw (7.5 HP) Tech data Salvastop: Working length 5.4m total length 6m Arm/pusher 600x200x100mm Capacity up to 100 kg Servo drive motor 11 Nm Current 230 volts 50 Hz 1 phase Salvamac Trolleybag 2: Powerful chip extractor built from galvanized sheet. Collection bag in PVC diam 500mm and 2x1250x500 mm filters in Cotton. Steel fan blade The machine is wheeled. Tech data: Collection bag 2 pcs diameter 500mm Filter 2 pcs diam.500mm H=1200mm 3 Hk (2.2Kw) 400V 3-phase Start/stop unit with motor protection mounted on the motor cover Instos 200 mm in diam Airflow 2950m3/h Size: 1730x580x2460 Wheel wonder Stock no: 2002123

Condition: ready for operation (used), Year of construction: 1983, Brand: Morbidelli Model: M35/A Year: 1983 Dkslemv Ehaeip T Dtjl Tech data: Spindle speed: 2800rpm Number of spindles: 35 pcs Max distance between outer spindle center: 1088mm Spindle center distance: 32mm Drilling depth: 70mm Engine: 3+3 HP Working pressure: 6-7 atm Weight: 650 kg Machine size: 1600x100x160mm CM Weight 650Kg Stock no: 2001582BXA

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Year of manufacture: 1975 Djlipjldg Skj T Dtskl Tech. info: Blade diam: 700mm Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM