Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Debvdjwhuipslvnocg Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Storage location: Hochheim

Condition: new, Paint drying cart 20/2X Arm length 780mm Distance between arms 120mm Dsbstqdl Eevdlvnjcg Min/Max material length 300/2650mm Number of arms 19

Condition: used, Year of construction: 2016, Functionality: fully functional, load capacity: 3,200 kg, Rotator Load center of gravity: 500 Dcobvswhtfpodlvneg ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: Comes from a Still RX 70-35 with approximately 1,800 hours of operation.

Condition: used, Year of construction: 2018, Working dimension X: 3.710 mm Working dimension Y: 1.620 mm Debvdlvsv Ht Dwjnscg Working dimension Z: 250 mm Number of milling spindles: 2 Main motor power: 10 kW MORBIDELLI JQX spindle: Yes Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer TRB 14: Yes SCM Tool changer FAST 14: Yes Vertical drilling spindles: 17 SCM Drilling aggregate F 29 LTC: Yes Horizontal drilling spindles in X: 8 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 8 Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Safety device: Bumper SCM Pro-Space: Yes Chip conveyor: Yes Interface for .dxf data: Yes SCM Machine table TV FLEX: Yes SCM TecPad: Yes Workpiece support aids: Yes Automatic central lubrication: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 4.950 kg Space requirement Length: 7,36 m Space requirement Width: 2,65 m Space requirement Height: 2,82 m

Year of construction: 2001, Condition: ready for operation (used), Main Drive Djbowhr Hljvdlvnocg Main motor power 11 kw This HOLZHER PK 1230 panel saw was manufactured in 2001. It is designed for efficient and precise cutting of panels. Ideal for woodworking shops looking to enhance their production capabilities. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 1989, Condition: used, Axis 3 serial number 84095 tool taper BT40 Djbjwhqz Ujvdlvnjcg toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Condition: used, Year of construction: 1987, Used machine Built-in mechanism for simultaneously folding up both planing tables, in seconds and almost weightless thanks to spring tension Table height adjustment via double cardan shafts, absolute parallel stroke, no adjustment during folding Thicknessing table with built-in feed roller, driven synchronously with the upper feed rollers, spring-mounted Height adjustment smooth via handwheel, precise measurement via mechanical digital display Replaceable extraction hood 150 mm 4 knife shafts; Tersa knives with slotted table lips Planing table dimensions: 2040 x 410 mm Planing width: 410 mm Max. planing height: 230 mm Motor power: 3 kW Speed: 5000 rpm Feed speeds: 8 + 14 m/min Weight: 560 kg Availability: upon request Location: Flörsheim Dcebvdlvswhuivjnjg

Condition: excellent (used), shaft diameter 40mm shaft length 680mm Dcebvov Ef Ixodlvnsg knives - cubic hydraulic shaft drive pump motor power 45kW hydraulic pressing unit strainer 30mm

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above Debvdlowhp Dzsvnscg on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Year of construction: 2020, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 7,5 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 9 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Dcebvsvb Nv Sjdlvnjg Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: HOLZ-HER CAMPUS, HOLZ-HER CAMPUS NC-HOPS, DIREKT CNC NC-HOPS 7 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.800 kg Space requirement Length: 3,7 m Space requirement Width: 2,95 m Space requirement Height: 2,47 m

Condition: excellent (used), Functionality: fully functional, Weinig Profimat 22N Four-sided planer Working width 220mm Working height 130mm Number of spindles 4 Spindle arrangement: Bottom 5.5kw Right Left 11w Top 7.5kw Feed speed regulated by means of a variator 6-22m/min Pneumatic clamps Drive on cardan shafts Infeed table length 1970mm Total power 26.75kw Machine weight 1600kg Dobvowhpnmjdlvnecg

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, SAOMAD TITANUM CNC machining center for doors and windows – precision, power, and productivity combined! A top-quality opportunity – inquire now before it's too late! The SAOMAD TITANUM: Thanks to its innovative locking system technology and automatic workpiece measurement, reduced machining times, maximum flexibility, and uncompromising precision. Highlights & technical features at a glance: Automatic workpiece handling: • Electronically controlled workpiece turning unit with brushless motors • Semi-automatic rotary clamping system for double-sided tenon machining – without wasting time Powerful machining units: • Short-cut saw with 400 mm diameter & pneumatic plunge adjustment • 2 profiling spindles (50 x 320 mm) & 1 fitting groove spindle (40 x 170 mm) • Upper horizontal milling spindle for radius machining + glazing bead saw Sash bypassing & rebating: • Special system for bypassing sash frames (up to 600 mm wide) • Equipped for sloped windows, rebating, and shatter protection Smartly controlled – implemented with high precision: • SCM Jolly PC control Dcebvdlsv U Nm Rovnog • Continuously variable spindle stroke • 12-position tool changer, HSK-F63 clamping system • Integrated workpiece return Technical specifications at a glance: • Spindle diameter: 50 mm • Spindle lengths: Slotted spindle 320 mm | Profile spindle 320 mm | Geared spindle 170 mm • Tool thickness: 120 mm • Cutting width / height: 120 mm • Radius motor & radius groups Ø: 200 mm • Machinable workpiece width: 200 – 500 mm • Horizontal spindles: 2 • 5-axis technology: ✔ • Conformity: CE mark Space requirements: • Length: 4600 mm • Width: 2300 mm • Height: 1841 mm Why the TITANUM? Because it combines everything modern manufacturing demands: automated, fast, precise – and flexible for every window geometry. Its robust construction and intelligent control system make it a true all-rounder for small, medium and large companies.

Condition: used, Used Machine Planer, Jointer, Rebating, and Moulder Planing Width 510 mm With Jointer Dcsbowhukasvdlvnog Weight Approx. 800 kg Please note: Machine does not have a motor brake and is sold as a spare parts carrier only! Availability: Short-term Storage Location: Flörsheim

Condition: excellent (used), Year of construction: 2009, motor power 37kW Dcebveikvugsdlvnjg capacity 4-7m3/h shaft length 1000mm shaft diameter 226mm weight c.a. 3t hydraulic pressure pump motor power 2,2kW

Condition: used, Year of construction: 2021, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 8 HOMAG Deactivation of single grippers: Yes HOMAG 2-fingered grippers: Yes Feedrate max: 130 m/min Continuously variable feed: Yes Saw blade projection: 125 mm Saw blade diameter max: 450 mm Main motor power: 18 kW Scoring saw: Yes, Motoric adjustment Jump scoring: Yes HOMAG VVSH - Soft-/ postforming: Yes Groove cutting function: Yes HOMAG Automatic grooving program: Yes Loading by vacuum lifter: Yes BARBARIC LCV: Yes Labelling: manually Automatic panel storage & retrieval system: Yes Veneer-edging stops: Yes HOMAG Pneumatic trimming stops: Yes Stop side: Right side Optimization: Yes HOMAG SCHNITT PROFIT: Yes HOMAG intelliGuide: Yes HOMAG Destacking module Lite: Yes HOMAG Material-dependent parameters: Yes HOMAG Machine table fully equipped with air jets: Yes HOMAG Pressure beam height control: Yes HOMAG Roller element on air cushion table: Yes Control: HOMAG CADMATIC 5 Dcjbvdjvb Nr Holvnsg Declaration of CE-conformity: Yes Conformity marking: CE mark

Year of construction: 2024, Condition: new, Return System Debvdljwhukyjvnjcg The RTS Compact is a standalone system that can be connected to any KAM, regardless of the manufacturer. The throughput speed is continuously adjusted to the speed of the KAM. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optionally available with the "RTS Compact Conveyor System Extension" for easy rotation of parts during cross-edging. Optionally available with the "RTS Compact Ergonomics Package." A lifting table and an air cushion table are installed at the end of the return conveyor. This option enables ergonomic working. Connection to KAMs of all manufacturers One-person operation of the KAM possible Maximum ergonomics Savings in personnel costs Material-friendly transport Installation time: approx. 0.5 days Rotating device for small parts with conveyor belt L 4500 W 800 Single-track roller track RTS Compact control system with optional control box Availability: Short-term Storage location: Flörsheim

Year of construction: 2023, Condition: used, Mitre milling aggregates: 1 Workpiece thickness min: 2 mm Workpiece thickness max: 28 mm Rotation speed min: 3.000 rpm Rotation speed max: 6.000 rpm Stepless rotational speed control: Yes Main motor power: 4,5 kW Feedrate max: 5 m/min Dcobvdlswhpfrevnog Continuously variable feed: Yes Gluing of protection foil: Yes Transversal processing: Yes Lengthwise processing: Yes Control: Positioning control Machine type: V-groove milling Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Dcsbjvymfbsvdlvnog Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2001, Cutting length: 4.400 mm Pusher stroke: 4.300 mm Number of grippers: 9 Feedrate max: 60 m/min Continuously variable feed: Yes Saw blade projection: 85 mm Main motor power: 7,5 kW Scoring saw: Yes Labelling: manually Stop side: Left Optimization: Yes Dcobswhpflovdlvnog SELCO Side aligner: Yes Control: SELCO PC STEUERUNG Conformity marking: CE mark Total connection: 20 kW Weight: 5.800 kg

Condition: used, Year of construction: 1984, Used machine Year of construction: 1984 Machine is completely overhauled Table size 1100 x 880 mm drive motor pole-changing 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Manual height adjustment via handwheel Manual swivel adjustment via handwheel Height adjustment of the milling spindle 110 mm Angular adjustment of the milling spindle -5° to45 °; mounted on both sides Djbvdlvowhuicenocg Reversing switch for clockwise and counter-clockwise rotation with 3-roller feed unit without Aigner table extensions Availability: by arrangement Storage location: Hochheim

Year of construction: 2015, Condition: used, STORE-MASTER 5110 automatic panel storage system used Built in 2015 Was a demonstration unit from Holz Her and only went into production with one machine in 2019 30% to 50% space savings Minimal distances between stacks (from 70 mm) = optimal use of space Excludes panel damage, panel separation control with weight measurement Fully automated process (storage/retrieval) and machine loading Adaptable for all panel formats (1.2 to 5.6 m) depending on options 90° panel rotation Low manipulator height External dimensions: Length 8.5 m, width 7.5 m Max. panel size 3.2 x 2.1 m Min. panel size 1.2 x 0.6 m Max. lifting weight 150 kg Dobvdlvsvdyv Ienocg Stacking height 1.8 m, max. 2.0 m m Max. lifting height 2.1 m Travel speed: Horizontal approx. 120 m/min Vertical approx. 45 m/min. Manipulator suitable for slightly air-permeable, smooth materials such as: e.g., coated chipboard, blockboard, raw MDF, raw HDF, raw particle board (good quality) Upgrade: Vacuum capacity for suction cups on the manipulator 100 m³/h for a mixed material in the warehouse, such as MDF and raw chipboard Connected load 6 kW Vibration-damped portal bridge, manipulator head with lifting device, and steel gripper arm, space-saving due to its low design Articulated arm design with direct drive via steel belt therefore wear-free and insensitive to vibrations Electronic panel position measurement Panel rotation correction The panels are measured with sensors and neatly stacked Separation device for thin panels via integrated weight measurement Storage and retrieval location Direct loading onto the machine Warehouse software Former list price: €110,000.00 € Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2009, Used machine Debvewhuldsdlvnecg Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain - Former list price: €104,250 Location: Langen Availability: Short term

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Universal dowel drilling machine with a pivoting drilling unit with fully automatic control with two pneumatic safety clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Dsbokwg Rcovdlvnecg Weight 420 kg Availability: Short term Location: Flörsheim

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Dobvdjwhuh Sjlvnjcg Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Drill beam: 19 spindles Working width: 630 mm Gantry passage: 710 mm Drilling stroke: 120 mm Position adjustment drilling unit: 0-45 mm Hole row position adjustment: 0-150 mm Spindle speed: 2800 rpm Shank diameter of the drill: ø10 mm Clamping height of the workpieces max. 100 mm Motor: 1.5 kW, 380 V, 50 Hz Working height: 850 mm Compressed air connection: 6 bar Weight: approx. 310 kg Availability: short term Storage location: Baden-Württemberg Dcobvdlevf R Tmovnsg