Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning Todpfx Asv Sg T Nocyed TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: used, functionality: fully functional, operating hours: 2,022 h, construction height: 1,450 mm, total length: 2,650 mm, construction width: 950 mm, Other Todpju U Nzpefx Acysd Technical condition: good

Condition: good (used), Technical parameters Maximum cutting capacity Round Tsdpfx Aceullzheysd 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Year of construction: 2021, condition: used, functionality: fully functional, Other Mast type: None Technical condition: New Description: Euro pallets: 1200 x 800 x 150 mm Load capacity: 15 pallets PLC control: Siemens S7-1200 Electric linear drive system: Linak Color: RAL 3002 red Including safety barrier and forklift protection Tjdpfjvdvycsx Acyed

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: Tjdpoxnpggefx Acysd - Original documentation - 4x saw blades

Condition: excellent (used), Year of construction: 1990, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Vertical metal band saw Manufacturer: JAESPA Model: MSU 5 Year of manufacture: 1990 Condition: very good Offer type: used machine Technical specifications: Throat: 500 mm Drive type: electric/mechanical Table: 615 x 615 mm tiltable Cutting range: max. cutting height 380 mm Tjdovvwwtspfx Acyod Drive power: 2.2 kW Notes: infinitely variable speed control, butt welding device, fence, machine lamp Weight: 500 kg The machine is in very good and ready-to-use condition and can be inspected and demonstrated at our site without obligation. We would be pleased if our offer meets your interest. Errors, changes, and prior sale reserved.

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: Tsdpfx Acjxnmn Ujyjd - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: used, functionality: fully functional, Year of construction: 2022, fuel type: diesel, construction height: 1,450 mm, total length: 2,650 mm, drive type: Diesel, construction width: 950 mm, Other Technical Condition: New Tjdpfx Aou U Nziscyjd

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM Tedpfxsquuufs Acyod CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? We can repair or refurbish your gearbox, no problem. In some cases we can also supply you with replacement gearboxes from stock Tsdpotv Eyvsfx Acyod

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Todjxnpf Aopfx Acysd Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: excellent (used), Year of construction: 1990, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Vertical metal band saw Manufacturer: INTERKONT Model: Select SB-4 Year of manufacture: 1990 Condition: very good Offer type: used machine Technical data: Cutting height: 305/270 mm Throat: 405 mm Drive type: electric/mechanical Drive output: 0.75/1.1 kW Notes: Todpfsg Sm Igsx Acysd Butt welding unit, Infinitely variable blade speed, Tilting saw table 500 x 500 mm Weight: 450 kg The machine is in very good and fully operational condition and can be inspected and demonstrated at any time at our premises. We would be pleased if our offer is of interest to you. Subject to errors, changes and prior sale.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Semi-automatic vertical miter bandsaw Berg & Schmid VGS 500 HA-I Fully refurbished & fully functional + 4m infeed roller conveyor RS 400 + Measuring stop with roller conveyor LM 110 DH (digital & handwheel) Cutting ranges: - 90°: round: 330 mm; square: 330 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 160 x 160 mm; rectangular: 500 x 330 mm - 45° left: round: 300 mm; square: 300 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 180 x 160 mm; rectangular: 300 x 330 mm - 45° right: - 45° left: round: 300 mm; square: 300 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 160 x 160 mm; rectangular: 300 x 330 mm Technical data: - Motor: 2.0 kW / 400 V - Saw band speed: 18 - 110 m/min steplessly adjustable - Saw band dimensions: 4,140 x 34 x 1.1 mm - Weight: 1050 kg - Dimensions: 1900 x 2000 x 2200 mm Features: - Semi-automatic bandsaw with microprocessor control and hydraulic movement of the saw frame - Cuts in semi-automatic mode with variable angle up to 45° left or right, manual adjustment of the saw frame Todpfx Acjxqfmnjyed - Hydraulic vise - Electronic frequency inverter for stepless band speed - Automatic detection of cutting start and end - Saw arm feed rate adjustment via feed regulator - Mechanical blade tensioning monitored by microswitch

Year of construction: 2024, condition: used, empty load weight: 4,500 kg, total length: 9,219 mm, construction height: 955 mm, Other Speed class: 96 Battery condition: new Todpfxovdg Iwo Acyjd

Condition: used, Year of construction: 2025, Horizontal Metal Band Saw with Swiveling Arm This horizontal metal band saw with a swiveling arm allows cutting in a plane perpendicular to the axis of the material and at any angle between 0° and 60°. The drive from the electric motor to the wheel driving the saw blade is transmitted through a mechanical gearbox (not a belt drive). The saw blade is tensioned on two cast iron wheels using a manual tensioner and guided through a set of bearing-mounted rollers. The material to be cut can be fed manually or with any mechanical feeding device, while the tool feed operates by gravity, based on oil flow in a dual-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved using a valve that regulates the oil flow between the chambers. The blade guides are equipped with a set of bearing-mounted rollers, which significantly improve blade tracking, service life, straightness, cutting accuracy, and quality. The arm, featuring a rigid design, is made of profiled cast iron. A control panel is mounted on the arm. The base is built as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped to form a tray for coolant drainage and chip collection during the cutting process. A cast iron worktable is mounted to the base, along with a swiveling arm and a control panel mounted on a separate arm. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed motion is the downward movement of the arm. The arm lowering speed (cutting speed) is regulated by the hydraulic cylinder. In the lower position of the arm (after the material is cut), the saw blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any cover is opened. An additional safety feature automatically switches off the saw in the event of blade breakage. Technical Specifications Todpfx Aexqfauscyjd Blade size: 2110 x 0.9 x 20 mm Motor: S1 100%: 0.75 kW Power supply: 230V 50 Hz Blade speed: 65 m/min (50 Hz) Weight: 173 kg Packaging dimensions: 1150 x 560 x 930 mm WARNING !!! The machine is a return item. Original packaging is missing, and paint color differs from standard.

Year of construction: 2015, operating hours: 3,337 h, condition: ready for operation (used), General Data Measurements width 2330 mm Measurements depth 2360 mm Measurements height 1850 mm Machine weight 2500 kg Main Drive Spindle motor power 6 kW Number of axis 2 Additional Equipment Saw Band: 5090 x 34 x 1.1 mm This KASTO Win A 3.3 was manufactured in 2015. A robust metal band saw, it features a 6 kW drive, operates on 400V/50 Hz, and handles a cutting speed of 12-150 m/min. The saw band measures 5090 x 34 x 1.1 mm, and it includes a 120-liter coolant system with a chip conveyor. Ideal for cutting dimensions up to 330 mm in height and 350 mm in width. Contact us for more information about this machine. Tjdpsxnd Nvsfx Acyed Application Types Sawing

Condition: excellent (used), Year of construction: 2013, operating hours: 5,800 h, functionality: fully functional, MEBA Mebamat 434 Automatic metal band saw Manufacturer: Meba Type: Mebamat 434 year of construction 2013 Condition: good, used Switch-on hours: 14.800h Sawing hours: 5682h NC-automatic version Motor 7.5 kW Saw band 6220 x 41 x 1.3 mm Belt speed 15 - 150 m/min. Max. Material passage Ø 430 / 430 x 430 Smallest Ø 5 mm Dimensions (L x W x H) 1700 x 3100 x 2350 mm Todpfoxnpfiox Acyjd Working height 750 mm Weight 4100 kg Zero stop Scraper chip conveyor Minimum quantity lubrication Automatic material height and width detection Roller conveyor 300cm 8x new replacement saw bands

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range 1000 x 220 mm Tjdoxnc U Rspfx Acyed cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: as good as new (ex-display), 2-Column Horizontal Bandsawing Machine, Automatic Manufacturer: METALLKRAFT Model: HMBS 300 x 300 CNC X Ref. No.: 3690098 Condition: Demonstration machine (approx. 30–50 cuts) Minor dent on the lower right side of the door Year of manufacture: 2021 Serial No.: 3001705061F Cutting capacity (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features include: Tedpfx Ajxm R D Djcysd - Chip conveyor - Machine lamp - Coolant system - Operating tools

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Tedpfxoumvb Ij Acyjd Technical Condition: New

Condition: used, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Todsxqd T Tspfx Acyed Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 230V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes CE Declaration yes Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm WARNING!!! THE MACHINE IS RETURNED, SERVICED, NO ORIGINAL PACKAGING.

Condition: ready for operation (used), Year of construction: 2002, Band saw, Industrial Band saw, Behringer HBP 220, Used Machine Manufacturer: Behringer Model: HBP 220 Tsdstlq Axspfx Acyjd Year: 2002 Weight: 1120 kg Dimensions: 2350 x 1250 x 1850 mm Cutting Range: 220x230 mm Hydraulic clamp Electrical Data: 1.5 kW; 50 Hz; 6 A Ready for operation

Condition: used, Year of construction: 2022, functionality: unexamined, fuel type: diesel, total length: 2,650 mm, construction height: 1,450 mm, drive type: Diesel, construction width: 950 mm, Other Technical Condition: New Tedpfx Acjumu Utoyod

Condition: ready for operation (used), Year of construction: 2009, Band saw, industrial band saw, Behringer HBP 220N, Used machine Manufacturer: Behringer Type: HBP 220N Weight: 1300 kg Dimensions: 2550 x 1250 x 1700 mm Cutting range: 240 x 240 mm Hydraulic vise Tjdpfetlqarox Acyjd Electrical data: 230/400 V; 1.5 kW; 5.9 A Ready for operation

Condition: excellent (used), Year of construction: 1995, Manufacturer: Behringer Type: HBP220 Year of manufacture: 1995 Inclusion dimensions: 2400 x 1800 x 1500 mm Weight: ~1300 kg Cutting range: 350 x 220 mm Ø: 220 mm Tedpfx Acsn Tphteyjd - Hydraulic vise - Chip conveyor Works perfectly, two-handed start