saw blade diameter 315 mm
cutting diameter 95 mm
cutting capacity - round bei 90° / 95 mm
cutting capacity - square 95 x 95 mm
cutting capacity - round bei 45° / mm
cutting capacity flat 140 x 80 mm
cutting capacity - square 45° / mm
saw blade speeds 33/60 p. min.
Drive 1,3/1,8 kW
weight of the machine ca. 300 kg
dimensions of the machine ca. 700 x 1000 x 2050 mm
Condition: ready for operation
Electric 400 Volt
Semiautomatic: Function as follows: 1. clambing ma...
saw blade diameter 350 mm
cutting diameter 90 mm
stroke 160 mm
mitter cutting - all-position ± 45 °
turning speed range U/min
voltage 380 V
total power requirement kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,80 x 0,85 x 1,35 m
- S/N: 4296
- pneumatic feed
- coolant equipment
capacity 90 degrees: round 510 mm
capacity 90 degrees: square 450 mm
band speed 15 - 100 m/min
table height 844 mm
dimensions of saw-band 5320 x 34 x 1,1 mm
total power requirement 3,0 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 1,9 x 2,87 x 1,3 m
Catalog No. : 4197
Type: ADIGE CM 601
Producer: BLM GROUP
Made in: 2014
Siemens simatic S 1200
Operating hours: 4575 h
Max. diameter of the cut material:
Main motor power: 5.5 kW
Max. length of cutting: 5-400 mm
Brass steel aluminium
Blade diameter: 365 mm
Parts diameter: 0 - 102 mm
Lenght cutting stroke: 5-400 mm
Baking for different diameters
Semi-automatic cold circular saw (metal circular saw)
Cutting capacity 0° (round) 95 mm
Cutting capacity 45° (round) 90 mm
reduced set-up times due to the quick-action vice with pneumatic clamping
automatic sawing process with infinitely adjustable feed rate
two saw blade speeds for optimum cutting results with different materials
mitre cuts up to ± 45
Saw stroke adjustable, thus shortening cycle times when sawing smaller diameters
gear drive with splash lubrication
Underframe and coolant unit a...
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
500 x 310
band speed 15 - 100 m/min
table height 844 mm
dimensions of saw-band 4250 x 34 x 1,1 mm
total power requirement 2,2 kW
weight of the machine ca. 1,2 t
dimensions of the machine ca. 1,4 x 2,4 x 1,935 m
High performance saw AMADA CMB 100
Heavy duty feeding system Schubert TRB-SAV
Year of manufacture 2009
AMADA saw with thin blade technology for material up to 6 m length
cutting range: up to 100 mm
Feed rate blade: 200-1500 mm/min.
residual length min 95 mm
saw blades 460 x 50 x 2,7 mm
Cutting speed 45-145 m/min.
Schubert heavy duty feeding system
for automatic separation of round and square material from 26-100 (140) mm up to 6 mtr. length
Transport roller table TRB 65-6
EISELE cold circular saw
Type VMS III PV- 038 with pneumatic material clamping and automatic feed
400V 50 Hz
Saw blade diameter 350 mm
Cutting range 90
Round 120 mm
Rectangle 17x100 mm
Cutting range 45
Round 120 mm
Rectangle 95x100 mm
Saw dimensions LxWxH
Dimensions feed gripper LxWxH
Weight approx. 750 kg
Mechanism for the rotation of head block for angled cuts up to 45° left and right with locking lever.
Pneumatic vice with removable anti-burr.
Pneumatic cylinder for head movement, with brake for speed adjustment.
Head tilting on adjustable self-lubricating bushings.
Drive pedal for semi-automatic cycle.
Emergency push button with key on control panel.
Blade lubrication-cooling system with electric pump.
Coolant liquid vat with extractable pump for vat cleaning.
max. saw blade diameter up to 350 mm
cutting diameter at 90° 120 mm
square tube 90 mm
flat profiles, hollow 200 x 90 mm
ditto, mitred 140 x 90 mm
Solid material 100 mm
U-steel NP 20
ditto, in mitre NP 14
speed range 17,5 / 35 rpm
drive power approx. 2,0 / 2,6 kW
machine dimensions L x W x H approx. 700 x 800 x 1850 mm
weight approx. 750 kg
Accessories / special features:
- Feed roller conveyor left, length approx. 2000 mm
- Stepless hydropneumatic feed
- Pneumatic vice
capacity 90 degrees: round 255 mm
capacity 90 degrees: square 240 mm
300 x 180
saw band length 2.765 x 27 x 0,9 mm mm
table height 950 mm
band speed 18 - 110 m/min
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,42 t
1. SCOPE OF SERVICES
- Behringer Eisele VA-0-250-NC circular saw (year: 2002)
- Feed rollers
- Coolant tank
2. TECHNICAL DATA
Sawing range: 90 °
Saw blade diameter: 25 cm
Drill hole: 40 mm
cutting range: 10-75 mm
cut-off length: 5-900 mm
Speed: 10-14-20-28 rpm
cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s
feed speeds: 0-40 mm/sec
NC axis: Yes
Dimensions: 190 x 127 x 190
Weight: 1300 kg
No responsibility is taken for the correctness, completeness and topicality of the information....
Metal circular saw semi-automatic Fabr. FABRIS Type SA 300
Mash." 537, built 2010
Saw blade diameter 300 mm
Drive power 1.1 / 1.5 kW
- CE mark plate
- Cooling device
- aut. Clamping stick
- aut. Saw blade feed
- several saw blades
Used, in good condition
Semi Automatic Circularsaw Imet Serio 350 SHE
Saw blade diameter: 350 mm
Saw capacity: 130 mm round / 100 mm square
Saw mitre: 45º left/right
Saw speed: 9 / 18 / 36 / 74 Rpm
Clamp opening: 180 mm max.
- Pneumatic clamp
- Pneumatic sawfeed
Country of origin: Italy
Machine weight: 450 kg
Machine LxWxH: 1.000 x 810 x 2.000 mm
Very suitable for steel, stainless steel, copper and brass
Semi-automatic circular sawing machine
Make KASTO Type:V350 U Year 1998
with mitre cut, roller conveyor and stop
Saw blade dm.350mm
Pneumatic vice and saw feed
Machine little used in good condition.
disk of circular saw-Ø: 315 mm
cutting area at 90° round: 90 mm
cutting area at 90° square: 100 x 60 mm
cutting speed: 17/34 m/min
engine: 380 V, 1,8/2,6 kW
space needed: 1200 x 860 x 1850 mm
weight: 720 kg
CFM-01 MACHINE FOR CUTTING PROFILES
The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, ...
Saw blade diameter, max mm 275
Cutting diameter mm 75
Max rectangular mm 120 x 75
Weight of the machine kg 250
Including roller conveyor m 2
Digital read out and pneumatic movement if length stop
Pneumatic feed and clamping
Machine in good condition. Under power and ready for inspection.
Cold circular saw Kaltenbach SKL 350, with reserve saw blades, angle adjustment from 0°-180°, saw blade drives up pneumatically, 2 roller conveyors a 3m and a 4.5m with measuring device and pneumatic connection
Saw blade diameter 315 mm
Saw blade speeds 33/66 rpm
0° (round) Solid material 70 mm
0° (round) Pipe 100 mm
0° (square) tube 90 x 90 mm
0° (rectangular) Tube 135 x 80 mm
-45° (round) Solid material 70 mm
-45° (round) Pipe 100 mm
-45° (square) tube 90 x 90 mm
-45° (rectangular) Tube 100 x 80 mm
+45° (round) Solid material 70 mm
+45° (round) Pipe 100 mm
+45° (square) Tube 90 x 90 mm
+45° (rectangular) Tube 100 x 80 mm
+60° (round) Solid material 70 mm
+60° (round) Pipe 80 mm
Semi automatic metal circular saw Fabr. ECHO type VMS II PV / PROD (only 90 °)
Masch.# 10106, built in 1979
Saegeblattdrm. 275 mm
160 x 80 mm flat section
flat 45° 120 x 80 mm
Angle iron 90 ° to 45 ° 80 x 80 mm
Iron 90 ° NP 16
Cylindrical 45° NP 12
90 + 45 ° 100 mm tubes
Double tee 90 ° 160 x 74 mm
Double tee 45 ° 120 x 58 mm
Solid material 100 / 75 mm
2 blade speed 40 / 80 RPM.
Power 1.4 / 1.9 kW
External dimensions approx. 800 x 800 x 1600 mm
Attention: no miter cutti...
saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 940 mm saw blade turning speeds 30/60/90 / 180rpm total power requirement 3,15 kW weight of the machine ca . 0.68 t dimensions of the machine ca. 0.8 x 1.0 x 1.85 m
High performance metal circular sawing machineQuote number: 19277Factory: RURACKType: VS 300 HA Machine no: 3552Baujahr:1996Technical data: -Semi-automatic with hydro-pneumatic feed workpiece clamping in pneumatic - Machine vice saw blade diameter 300mm-Cutting speed N 40 - 80U/min-Cutting range at 90° - round 95mm - Rectangle 125 x 90mm- in mitre re. left at 45° - round 95mm - rectangle 95 x 85mm - drive 400 V / 1,2 / 1,6kW-pneumatic connection 6 - 8bar-coolant unit space requirement approx. ...
sawing machine for non-ferrous metals
transmission range up to Ø60 mm respectively 70 x 70 mm
cut-off length up to 250 mm
engine power: 3 kW
rotation speed: 180 - 4800 rpm
sawing blade up to 250 mm
control system renewed: 2011
ESTA oilmistseperator type AS 600, year of construction: 2006
cold circular saw semi-automatic make Eisele
Type VMS II PV
for straight, mitre and longitudinal cuts
infinitely variable pneumatic feed
autom. quick clamping device
Cutting ranges with saw blade 275 mm:
flat profile, hollow: straight cuts 140 x 70 mm, mitre 100 x 70 mm
Angle iron: straight cuts 140 x 70 mm, mitre 100 x 70 mm
U-iron: straight cuts NP 14, mitre NP 10
solid material: 90 mm
with roller conveyor 2000 mm
Peculiarities of this machine:
hydropneumatic heading adjustable (see display)
sawing process and vice opening either manually or automatically
The saw head automatically returns to its basic position once the saw depth has been reached.
90° degree cut
diameter max. 130 mm
square tube 100 x 100 mm
mitre cutting steplessly variable
right and left mitre, if necessary with one tension
Machine was rarely used.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.