Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Gedpfx Anezr I T Hsmjbr Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gbodpfx Aozr I Ahenmjr

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Cutting length: 6000 mm Saw blades: 420 mm E550 control system Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Pneumatic angle adjustment from 45 to 90 degrees Gbodpfxezr Icno Anmsr Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Gbsdpjyi Uq Uefx Anmjr Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Gbedpfx Anei D D A Somer Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request Features: - Robust, highly efficient electro-hydraulic miter band saw Gedpfxjzqgf So Anmjbr * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: good (used), Year of construction: 2002, cutting diameter 325 mm capacity 90 degrees: flat 500 x 300 mm capacity 90 degrees: square 325 x 325 mm cutting speed 35 / 70 m/min capacity 45 degrees: round 300 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 200 x 200 mm capacity 60 degrees: square 200 x 200 mm saw band length 4200 x 27 x 0.9 mm work height max. 750 mm total power requirement 2,2 kW weight of the machine ca. 1.300 kg. range L-W-H 2230 x 2100 x 1280 mm Original price approx. 35.000 - 40.000 euros Special price upon request Machine from a workshop for people with disabilities Gbodpfszqgf Esx Anmjr Features: - Robust electro-hydraulic band saw - FULLY AUTOMATIC * With manual miter adjustment - Continuously variable hydraulic adjustment of clamping pressure - Control switch for manual functions - Single/multiple stroke selectable - Single cuts possible - 2x hydraulic vertical clamps (bundle clamping device) - Control panel on the front of the machine - Operating instructions (PDF) Additional technical data: - Single stroke: 0 - 600 mm - Multiple stroke: 0 - 6.000 mm - Lowering speed: 0 - 300 mm/min. (continuously variable) - Max. material weight: 250 kg/m.

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), overall weight: 3,000 kg, This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. The saw features a hydraulic clamping device that operates in both the vertical and horizontal directions. The roller conveyor on the feed side is 15 m long and is equipped with a manually controlled feed mechanism. On the discharge side, there is a 12 m long roller conveyor without a drive. • Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm • Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm • Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm • Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm • Smallest cutting length (90°): approx. 90 mm • Remaining cutting length (manual, 90°): approx. 90 mm • Cutting speed: 10–120 m/min • System/belt tensioning pressure: 95 bar • Connected load: approx. 9 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC • Current consumption: approx. 18 A • Fuse protection: 35 A • Cable cross-section: min. 4 x 6 mm² • Material support height: 800 mm Gbedpfxox D N Ams Anmsr Additional equipment • Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010) • Chip conveyor (0.15 kW motor)

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), overall weight: 2,800 kg, total height: 2,600 mm, This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. • Working area (Ø / flat at 90°): 410 mm / 700 mm x 400 mm • Working area (Ø / flat at 75° left): 410 mm / 660 mm x 400 mm • Working area (Ø / flat at 60° left): 410 mm / 580 mm x 400 mm • Working area (Ø / flat at 45° left): 420 mm / 450 mm x 420 mm • Working area (Ø / flat at 30° left): 300 mm / 300 mm x 300 mm • Working area (Ø / flat at 75° right): 410 mm / 660 mm x 400 mm • Working area (Ø / flat at 60° right): 410 mm / 580 mm x 400 mm • Working area (Ø / flat at 45° right): 380 mm / 450 mm x 380 mm • Smallest material dimensions (Ø / flat): 20 mm / 20 mm x 20 mm • Smallest cutting length (90°): approx. 45 mm • Remaining cutting length, manual (90°): approx. 90 mm • Cutting speed: 20–140 m/min • System/belt tensioning pressure: 65 bar • Connected load: approx. 14 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC • Current consumption: approx. 36 A • Fuse protection: 50 A • Cable cross-section: min. 16 mm² • Material support height: 800 mm Gbsdjzqa Tcepfx Anmsr Additional equipment • Automatic feed and discharge • Chip conveyor (motor power: 0.09 kW) Dimensions Machine Depth 1850 mm

Condition: good (used), with cooling pump Gjdpfx Anozrzx Njmjbr

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Gedpfxjzrzpbe Anmsbr

Condition: ready for operation (used), Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible. Gbsdpfx Anjzrzn Rsmsr

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. Gbsdpfx Anszavzvsmer DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, SALE – 5% OFF CNC COLUMN TYPE METAL BANDSAW M2-330C Gjdpfxszd T H Ao Anmebr The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm Godpfx Anjzrvfwomebr - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: used, Year of construction: 1998, cutting diameter 250 mm saw band length 3600 mm cutting width 300 mm Gbodpfjzp Rxtox Anmer capacity 90 degrees: round 250 mm capacity 90 degrees: flat 250 x 300 mm capacity 90 degrees: square 250 x 250 mm cutting speed 20 - 100 m/min total power requirement 2,05 kW weight of the machine ca. 720 kg *Metal Band Saw - Fully Automatic Features: - Manual stop with limit switch - Hydraulic clamping vise - Control panel - Stepless adjustment of band speed

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. Gjdpfxozp Iu Ss Anmebr The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: good (used), functionality: fully functional, Made in Switzerland Table size: 870 x 870 mm Gjdpfx Anezp Iqtomobr Sliding table: 800 x 400 mm Saw blade: height-adjustable via crank Saw blade diameter: 175 mm 2-stage switch Central dust extraction Roller table stop Planer blade and chamfering device

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: - 5.5 kW Gbedpfezp Inljx Anmor Accessories: - 10 new saw blades Delivery time: - Immediate

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, -KASTOTwin AE 4 CNC automatic bandsaw -Cutting diameter: 400 mm Gbjdpfx Ajzp Dpxonmjr -Overall dimensions: 400x400 -Single feed: 900 mm, multiple feed: x999 -Saw blade: 5009x34x1.1 (3 additional blades included, value approx. 1,000) -Automatic chip collector -Coolant pump -Documentation -Original, very robust and certified roller tables: 1 receiving table, 200 cm, and 1 feeding table, 400 cm, for a total of 600 cm of roller tables -Machine is in good working order and ready for operation; can be viewed in Głosków, near Warsaw -Machine serviced until the end of 2025 -We can assist with transport arrangements -Weight: 2200 kg -Net price

Condition: reconditioned (used), Year of construction: 2010, For sale: a Kaltenbach cold-cutting circular saw. Gbjdpfx Aszrncusnmor Gearbox with no backlash! Type: KKS 400 E Year of manufacture: 2010 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch Shipping possible upon request. Forklift available for loading.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AT 112 M8/4 IMB14F130, saw blade diameter: 315 mm, - NEW PRICE - For sale due to business closure. Gbedpfezarnrox Anmjr The machine is in very good condition and fully functional. It comes with 1 original base frame and 2 roller conveyors, one measuring 5200 mm and the other 2200 mm. The saw blade is new and unused.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. Gbodpfx Aezrmk Rjnmor MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: excellent (used), Year of construction: 2010, Bandsaw automation system, Bauer, year of manufacture 2010. Circular cutting capacity: 300 mm Rectangular cutting capacity: 20 x 220 mm Blade dimensions: 3660 x 27 x 0.9 mm Gbjdpjzrmfhsfx Anmer

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Gsdpfozrl Eaex Anmsbr Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Machine is currently running.