Used Die Cutting for sale (17,759)

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length Kwsdpjvv R H Uofx Ahvjw ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Ksdpjp H Swdefx Ahveww Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, Brand New - One Year Warranty Kwsdpfxjvv R Hzo Ahvew Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device Kjdpfx Ahowypp Ievsww - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal Kwedeywdr Eepfx Ahvsw

Condition: used, functionality: fully functional, overall weight: 4,500 kg, Drossert die-cutting press, working area 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats. Kodpfx Ajyu H Ivshveww

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Ksdpfx Ahsxluukoveww

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Kwsdpfxsyt N Dko Ahvjw

Condition: good (used), Automatic die-cutter Bobst SPO 1575 EEG ref 2925 Year – 1966, machine modernized in 2008 Max sheet format – 1055 x 1575 mm Kjdeytuxgspfx Ahvsww Min sheet format – 400 x 600 mm Max mechanical output – 4500 sheets/h Max pressure – 350 t Vacuum feeder Stripping section Waste removal by bar Batch delivery Attractive price for quick sale

Year of construction: 1991, condition: good (used), Bobst 102E ref. 2957 Kedpfeyturyex Ahvsww year: 1991 max sheet size – 720 x 1020 mm min sheet size – 350 x 420 mm max pressure – 250 tons stripping section material – board up to 2000 gsm corrugated board – E flute machine raised – 300 mm

Year of construction: 2010, operating hours: 50,000 h, condition: good (used), Bobst Novacut 106E ref. 2955 year 2012 Kwsdpfx Ahjytufyjvsw counter: 180 million sheets maximum output up to 8,000 sph maximum sheet format – 740 x 1060 mm material: carton, corrugated board F, E – up to 4 mm stripping section Non Stop at delivery machine elevated by 300 mm

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 year 2010 max sheet size 740 x 1060 mm operating hours – 32,000 h Kodpfeytudcox Ahvoww cleaning section NON Stop at feeder register control R, L motorized impression setting

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 BKE 200/5 Kwjdpsg Dgyxofx Ahvew Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: refurbished (used), Flatbed die cutter Erba model TITAN 1 PN, format 64/88 cm, Picard plate, millimetric pressure adjustment, centralized lubrication, self-centering frame, 3 operating modes (single, continuous, timed), full enclosure, counter-die plate, machine completely overhauled. Ksdexd T Dbopfx Ahvoww

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Kodpfx Ahjymxkaovjww This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Kwjdpfxeyrnhxj Ahvjw Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." Kwjdpfx Aov Nzpgohvjw The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Kjdpowvbm Rjfx Ahveww

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Kwedpsxz Ncbofx Ahvsw

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Kedpfx Asx Ndu Dshvoww Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, URANIA DSK Kjdsw R Eqbspfx Ahvjww Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Kwedpfjyb Tc Hjx Ahvow Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg No documentation available.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame Kwjdjyl Ry Dopfx Ahvjw - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Kwsdpsxz D Daofx Ahvjw Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg Hot foil device Step motor Schneider PLC Schneider with full documentation 2 zones - two push and pull rollers

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Kwodpfsiklxbox Ahvow Feel free to contact us.