Used hacksaws cutting range 250-399mm for sale (20)

Condition: used, capacity 90 degrees: round 110 mm capacity 90 degrees: flat 255x160 mm capacity 90 degrees: square 210x210 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 165x110 mm cutting range 45 degree right side: square 150x150 mm cutting speed 11/13/17/22/26/34 m/min stroke speeds 50/64/82/100/128/164 Hübe/min Lajdpjwf Dy Sefx Anusc dimensions of saw-blade 400x36x2 mm power requirement 1,8 kW

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Material feed height: 680 mm Lajdpfx Aslqadhjnuec Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw arm lowering - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition

Condition: used, functionality: fully functional, Metal bandsaw, blade length 430 mm Cutting diameter 210 mm Saw blade length 400 mm Cutting range at 90 degrees: square 190 mm Cutting range at 90 degrees: flat 240 x 190 mm Ledpfoyr Aqnjx Anusac Cutting speed 16/32 m/min Total power requirement 1.1 kW Machine weight approx. 180 kg Dimensions (L x W x H) 1.2 x 0.8 x 0.808 m

Condition: used, Year of construction: 2000, cutting diameter 250 mm dimensions of saw-blade 450 x 45 x 2,0 mm cutting width 280 x 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 170 x 200 mm cutting speed 16- 32 m/min power requirement 1,3 kW dimensions 1,3 x 0,55 x 1,0 m weight 180 kg Used hook saw in good condition Lajdpoy Nnv Sofx Anuec - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade

Condition: used, Year of construction: 1996, cutting diameter 280 mm Lsdpsy N D H Tjfx Anujac capacity 90 degrees: flat 280 x 160 mm capacity 90 degrees: square 240 x 240 mm band length 425 x 40 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 150 x 250 mm capacity 45 degrees: square 170 x 170 mm total power requirement 1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 1,4 x 0,8 x 1,0 m

Condition: good (used), Stock number: 2861 Type / Model: HN25 (presumably) Cutting range round: 270 mm rectangular: 270x 250 mm blade length: 500 mm opening: 310 mm Control: conventional Stroke rate: 85 and 110 double strokes per minute Connection: 1.7 kW Clamping jaws WxH: 180 x 120 mm Accessories/equipment: automatic switch-off Condition: good weight: 0,7 t Laedpfotuix Ssx Anusc Dimensions: 1,400 x 650 x 1,000 mm

Condition: good (used), functionality: fully functional, Hydraulic hacksaw for Round: 350 mm Saw blade length: 550 mm Power: 2.8 kW 6 stroke rates approx.: 36 / 45 / 58 / 72 / 90 / 116 strokes/min Ledpfx Anoy Ey Avjueac Cutting speed approx.: 11 / 13 / 17 / 22 / 36 / 34 m/min Cutting area flat approx.: 350 x 200 mm

Condition: used, Year of construction: 1972, functionality: fully functional, total length: 2,000 mm, total height: 1,250 mm, total width: 1,000 mm, saw blade length: 650 mm, cutting range round steel at 90°: 400 mm, input voltage: 400 V, type of input current: three-phase, cutting diameter: 400 mm, Offered from an estate: Kasto EBS 400 U hacksaw Very robust, cast construction Industrial quality Made in Germany Year of manufacture: 1972 Two speeds adjustable electrically Additional cutting speeds can be set via pulley adjustment. With rapid traverse. Maximum sawing diameter approx. 400 mm Documentation available. 400V three-phase connection Lodeyy R Uxjpfx Anujac One 650 mm saw blade included Cylinder was resealed some time ago; no oil leakage! Fresh oil change Scraper marks on the guides still visible! With fully functional coolant system. This saw cuts 120 mm round steel in only 4 minutes Sold as seen, for hobbyists/repair. Private sale: no warranty or guarantee of any kind. All information given without liability. Returns excluded.

Condition: used, Year of construction: 1977, cutting diameter 260 mm band length 480 mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Laedpfeyycy Tjx Anuoc We look forward to your visit. Your Markus Hirsch Team

Condition: used, cutting diameter 400 mm band length 680 mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Lodpfeyycy Hox Anuoac Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, serial number 1106479 400 Laodpfx Asyn R Nqsnuec miter ja cooling ja

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Ljdpsvyl Dvofx Anusac Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: Laedjwzu A Aepfx Anuec - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm 260 x 180 total power requirement 2,0/2,6 kW weight of the machine ca. 1,4 t Lajdpeyt R Iksfx Anusc dimensions 2,1 x 1,7 x 1,0 m

Condition: excellent (used), functionality: fully functional, 2. Technical Data KASTOfunctional U Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Ledpfxjyhzi Sj Anusac Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system

Condition: used, Year of construction: 1993, cutting diameter 320 mm Ledpfx Aoynni Isnusac band length 535 x 40 x 2,0 mm capacity 90 degrees: square 300 mm no. of strokes 45 - 62 - 90 - 125 Hub/min total power requirement 3,0 kW weight of the machine ca. 0,35 Kg dimensions 1,4 x ,4 x 1,2 m Hydraulic bow saw with: - Coolant system - Emergency stop device

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm Ljdpfjxab Hcjx Anusac capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: used, Year of construction: 1982, Cutting height ca. 280 mm Ljdpfx Aovwfc Hsnueac cutting width ca. 280 mm Dimensions (L/W/H) 1500x700x1400 mm

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min Lodpfxexz Hhhj Anujac total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Lajdpfx Aoxpvwhsnusc Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T