Used cold saws - fully automated - saw blade diameter 351-419mm for sale (35)

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Fedpfsztxphjx Akvopk Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Fedpfx Akoztxm Tevspk Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Fodpjzpb Eqsfx Akvjpk

Condition: good (used), Year of construction: 2002, functionality: fully functional, Feature | Technical Data Machine Type | Fully automatic CNC pipe circular saw Cutting Type | Straight cut (90°) Pipe Diameter | Ø 8–80 mm (partially specified as 10–80 mm) Square Profiles | 10 × 10 to 70 × 70 mm Rectangular Profiles | Up to 80 × 70 mm Maximum Bar Length | 6,500 mm Fpedpfx Aozqdlcokvsk Minimum Bar Length | 2,000 mm Maximum Cutting Length | 4,500 mm Minimum Cutting Length | 50 m

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, We offer for sale a fully automatic circular saw BLM Group ADIGE EM80, suitable for precision cutting of tubes and profiles in series production. The machine is equipped with Siemens Sinumerik CNC control and an automatic material feeder, enabling efficient and repeatable manufacturing. Technical data: Year of manufacture: 2015 Control: Siemens Sinumerik Power supply: 38 kW Voltage: 380 V / 50 Hz Weight: approx. 8,500 kg Operating hours: approx. 26,400 h Cutting range: tubes Ø 10–80 mm Max. part length: 600 mm Ideal for serial production of short parts Equipment: Automatic feeding system Full machine enclosure Multiple tool positions Set of clamping jaws (see photo) Fpodpeznz T Sofx Akvsk High-speed, high-performance saw suitable for series production, offering high productivity and cutting accuracy. Test operation possible by appointment.

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm Fjdpev Hhrvofx Akvepk feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Automatic cold circular saw - CNC control Fsdpfxezlkvds Akvopk - Micro-lubrication system

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Fpodsy Ayc Dspfx Akvek Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 107500 € 2031.75 € 360 mm Ø360 x 40 mm 40 - 280 U/Min rund: 20 - 100 mm; quadra 60 mm 10 - 9999 mm 900 mm 15 kW 3400 mm 2675 mm 2750 mm 3450 kg 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. Fpodpsy Nnxgefx Akvok STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gearbox OPTIONAL EQUIPMENT (prices on request): mist filter 6 m roller table

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Fpjdpjkfp D Tefx Akvok Technical data and dimensions: Subject to change.

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Fpjdpfxodbp Eqe Akvok cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm Fedpfx Asb Sciaokvspk cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: Fsdpfxod Iin Eo Akvopk · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: Fsdpod Iin Hjfx Akvspk · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Fpsdpfx Akowa Ecqovsk Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: used, Year of construction: 2009, Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Sawing area flat 45°: 140 x 120 mm Fedpsygkvnsfx Akvjpk Sawing area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Sawing range round 45°: 140 mm Sawing range round 30°: 110 mm Feed length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spray device Hydraulic material tension Hydraulic material feed Weight: approx. 1300 kg

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Fpedoiuz Smepfx Akvjk Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Fpedpfx Akjma Azdsvok Model: S400 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Fpodpsma A Huefx Akvjk • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Fpjdpfx Aemdq Thekvok Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. Fsdpfx Aoma Azlskvopk • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: Fjdpfx Aema Aztokvjpk • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Fpodsmdq S Dopfx Akvsk Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Fodpfxjmdq Tae Akvopk Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Fpedpfx Aksma Azwevsk Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.