Used horizontal band saws - half-automatic - cutting range 301-349mm for sale (49)

Condition: good (used), Mitre Band Saw MEBA DG 320 - Cutting capacity: 325 mm - Rectangular material: 500x300 mm - Mitre 45° – Round: 300 mm - Mitre 45° – Rectangular material: 300x300 mm - Mitre range – infinitely adjustable: 30–135° - Hydraulic material clamping - Hydraulically adjustable sawing pressure - Infinitely variable band saw speed - Saw blade dimensions: 4200x34x1.1 mm Ncjdjycwcajpfx Ad Nel - Coolant system - Automatic shut-off - Emergency stop - Documentation Dimensions: LxWxH 1.8x1.6x1.6 meters / Weight 1500 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting speed: 90 mm/min, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting width (max.): 360 mm, table height: 300 mm, overall weight: 780 kg, cutting height (max.): 300 mm, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Njdpfx Asyac Uied Necl Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Ncodpfeycqhcjx Ad Nol Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Nsdpfx Ajychwnjd Nocl Type: Semi-automatic band saw Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Condition: new, functionality: fully functional, 2 speeds 35/75 m/min Saw blade speed 15-150 m/min Saw blade dimensions 4200x34x1.1 mm Cutting range at 90 degrees: round 325 mm Cutting range at 90 degrees: flat 500x300 mm Cutting range at 45 degrees right: round 300 mm Cutting range at 45 degrees right: flat 300x300 mm Cutting range at 30 degrees right: round 200 mm Cutting range at 30 degrees right: flat 200x200 mm Cutting range at 45 degrees left: round 300 mm Cutting range at 45 degrees left: flat 300x300 mm Minimum remnant length without bundle clamping – manual 85 mm Minimum remnant length with bundle clamping – manual 260 mm Smallest diameter 5 mm Working height 750 mm Total power requirement 3.0 kW Dimensions 1450x2200x1400 mm Equipment/Accessories: - Rapid mitre adjustment from 30° to 150° stepless, digital mitre display to 0.1° - Quick material clamping: Material is clamped parallel at 90° in every saw frame angle - MEBA high-performance package version “HSS” – Hydraulic lifting and lowering of the saw frame and hydraulic clamping of the material Stepless hydraulic cutting pressure and feed regulation Nodpfxox Sq Tfo Ad Necl Display of lowering speed via scale. Cut-through display via manometer. Rapid saw frame lowering via push button to material edge - Frequency-controlled AC drive 15–150 m/min – 3 kW - Full-stroke hydraulic material clamping - Machine base with chip collection tray - Saw blade drive with limit switch - Precision saw blade carbide roller guides, saw blade brush - Complete coolant system with electric immersion pump - 1 saw blade on the machine, 4-6 TPI

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm Ncsdpfx Adoiqp Erj Nel saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: used, Year of construction: 2005, cutting diameter 178 mm saw band length 2265 mm cutting width 225 mm dimensions of saw-band 2265 x 20 x 0,9 mm band speed 30 / 60 m/min Ncodpfxjrzwwrs Ad Nol capacity 90 degrees: round 178 mm capacity 90 degrees: flat 225 x 110 mm capacity 45 degrees: round 140 mm capacity 60 degrees: round 85 mm total connected load 0,75 kW weight of the machine ca. 165 kg dimensions of the machine ca. 1100 x 700 x 1650 mm Furnishing: - Coolant device - band saw blades

Condition: new, Model Name Ncodpfjl Sva Isx Ad Nsl SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Shark 332-1 SXI evo Njdegvkafspfx Ad Nscl

Condition: new, cutting diameter 300 mm Nedpfsxaagbsx Ad Njcl capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW dimensions of the machine ca. 1647 x 2157 mm weight 720 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop Ncedpjxaax Djfx Ad Nsl - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm capacity 45 degrees: flat 350 x 320 mm capacity 45 degrees: round 320 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: flat 230 x 310 mm capacity 60 degrees: square 200 x 200 mm capacity 60 degrees: round 200 mm turning speed range: 15 - 100 m/min dimensions of saw-band 4640 x 34 x 1,1 mm engine output 4,0 kW weight 1190 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Nsdpfjxaa Tzox Ad Necl Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm Ncsdpfjxaav Asx Ad Nel capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Nodpot D Azcefx Ad Nocl Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and frame lifting to pre-set height after completion of the cut. Stepless hydraulic monitoring of cutting pressure and feed at the saw band feed. This ensures optimal conditions for every sawing task, i.e., constant pressure with solid material and constant feed with thin-walled profiles. Especially suitable for universal applications with varying cross-sections, materials, and frequent miter cuts. Machine control in compliance with CE standard 89/289. Technical Data: Round/Flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid downfeed of the saw frame to material edge via push button Manual miter adjustment from 90° to 30°, stepless via scale The miter rotation point is at the intersection between saw band and fixed vice jaw, thus no change in length measurement with changing angle positions Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralized machine controls Saw band drive with end-stop Movable band guide arm, adjustable to material width Saw band deflection wheels – carbide guides Ncjdpfxshppabj Ad Nol Powered chip cleaning brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/RAL 7031) Remnant piece length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel Drive: Saw band 3.0kW; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without installation elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser guide Micro-spray device Clamping pressure regulator Support table on the infeed side

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Nsdpfjt Dpw Rsx Ad Nocl Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 2925 mm saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg Nodpfev T Tcmsx Ad Necl dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. *

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Ncodjw U Svljpfx Ad Nsl Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Ncodpfx Ajfibd Ted Nel Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed - Chip cleaning brush - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min - Front millimeter stop of 500mm with electric limit switch Serial number: 41021 - Blade dimensions: 4160x27x0.9mm Nodpfx Aox Ng Sxod Nscl - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: new, Year of construction: 2025, neu 2025 060076 Njdpfswiq Rljx Ad Nocl prompt, Zwischenverkauf v Türkei 14200 € 272.64 € 1 1 Schwenkrahmen 4160x34x1,1 mm 15 - 120 m/min 320 mm 320 mm 450x320 mm rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 rund 320 mm, quadrat 300 rund 230 mm, quadrat 220 860 mm 0.37 kW 2.2 kW 0.12 kW 2230 mm 1150 mm 2140 mm 1030 kg Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German OPTIONS: Roller tables and band saw blades on request

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Ncodpfoxztfasx Ad Njl Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, cutting area - round: 320saw band dimension: 4160 x 34 x 1,1cutting area 45°: 320cutting area rectangle: 610 x 320cutting area 45° mitre flat: 355 x 320cutting speed: 20-100messurements (LxWxH): 2100 x 1200 x 1350weight approx.: 1200 KK Kletzer UBS-S 320 GL  Semi automatic Bandsaw Mitre Head  Heavy duty Structural steel machine   Standard Accessories: - M42 Bi-metal saw blade   - *Variable speed  - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow - Blade tension Device Nedorz Uzijpfx Ad Necl - Pendant control - Mitre Vice  - Heavy Duty Gear Box 

Condition: used, Year of construction: 2003, 265 mm 3280 mm 0,9 mm dimensions of saw-band 3280 x 27 x 0,9 mm 200 mm cutting Ø by 30° 130 mm mitre joint cuts -/+ degrees 90- 30 flat material 300x150/130x100 Ncedpfx Adoxuv E Aj Nsl 15- 100 m/min 2,0 kW 1,61 x 0,96 x 1,4 m weight 0,5 t Used automatic band saw with sided miter - rapid travers - roller conveyor - 20 new saw blades

Condition: new, – Semi-automatic – Hydraulic Nedpfxswin Rvo Ad Nscl – 2 speeds: 40/80 m/min – Double miter – Hydraulically adjustable sawing pressure – Cooling system – Saw blade 3960 x 27 x 0.9 mm – Emergency stop – Documentation – 400V