Used Hydraulic Cutting Shears for sale (27,078)

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Gedsx Hqnljpfx Ag Djuk Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Gsdowunldopfx Ag Deuk Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Serial number: 42037.736.81.008 Guedpswvi N Tofx Ag Dok

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered Godpox Hqmzsfx Ag Djuk

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, power: 21 kW (28.55 HP), total length: 5,500 mm, total width: 2,380 mm, total height: 2,195 mm, empty load weight: 17,500 kg, workpiece length (max.): 4,100 mm, CNC-hoekregeling CNC-messpeling CNC-achteraanslag met pneumatisch plaatondersteuningssysteem met transportband met schrootbak Gsdpox Eng Nsfx Ag Douk opvouwbare achteraanslag Strokes/min: 7 > 28 str/min Adjustable cutting device: 0,1 > 2,2 mm Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5° > 2°

Condition: used, functionality: fully functional, Year of construction: 1978, Used 3-meter guillotine shear from Luther Werke Model: TS H 30 6 Capacity: 3100 x 6 mm Electric guillotine shear Year of manufacture: 1978 Guodex D Uwpopfx Ag Dek

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Guodpjdzqnyefx Ag Dsk Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Guodpfx Agsx E Rnco Dek Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: used, functionality: fully functional, Year of construction: 1988, Simat hydraulic guillotine shears type 3100/6.35 working width 3100 mm maximum sheet thickness 6.35 mm motorized back gauge Gsdpfxex Daxfo Ag Deuk

Condition: new, Year of construction: 2026, General information Gedpfxsqmnbwo Ag Dsuk Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, back gauge: 750 mm, power: 7.5 kW (10.20 HP), total length: 3,880 mm, total width: 1,650 mm, total height: 1,700 mm, empty load weight: 4,500 kg, workpiece length (max.): 3,100 mm, Haco TSX 3100 x 6 mm CNC Strokes/min: 8 > 14 str/min Adjustable cuttingedge: 0,5 > 3° Godpfsx End Isx Ag Djuk Number of sheet holders: 18x

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 4-meter guillotine shears from Haco Model: HSL 4010 Capacity: 4100 x 10 mm Electric back gauge Guodpfx Agox D Uvre Dsk Year of manufacture: 2005

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Godpfjx Ei Arox Ag Douk

Year of construction: 1998, condition: ready for operation (used), Immediately available ex-stock: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture 1998, very few operating hours (like new condition) Motorized backgauge Backgauge travel 1000 mm (CNC controlled) Machine control: Siemens Simatic CP 7 Gsdpfx Ajx E Rmxog Douk Cutting length 3050 mm Material thickness up to 10 mm Drive power 15 kW Weight 8 t Offered at €13,500 plus VAT ex-location.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical Data: - Cutting length: 3050 mm - Cutting capacity at 400 N/mm² tensile strength: 13 mm - Cutting capacity at 400 N/mm² (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3 ° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorised back gauge up to: 1000 mm - Rear safety device with light barrier - Front squaring arm: 1000 mm - HSLX version: - CNC control with HACO SC 5 controller with input of sheet thickness in mm - Automatic adjustment of cutting angle according to sheet thickness - Cutting length limitation Guedpfxjx D Uzze Ag Dek - Automatic positioning of back gauge (8 programs – 80 sets) with - Digital display and automatic back gauge retraction - Option for motorised adjustment of back gauge via 2 push-buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 9000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 972 h, working width: 3,060 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 8 mm, power: 18.5 kW (25.15 HP), overall weight: 6,250 kg, Equipment: documentation/manual, type plate available, Hydraulic shear Baykal HGL 3100x8 in good condition Now available, free loading onto truck Gjdpfxox Dy Tis Ag Dsuk

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, power: 30 kW (40.79 HP), total length: 3,600 mm, total width: 2,350 mm, total height: 2,400 mm, empty load weight: 17,000 kg, workpiece length (max.): 3,100 mm, Type: DS Zware schaar met anti-torsiesysteem! hydraulische zwenkbalk Elgo digitale uitlezing Strokes/min: 5 > 9 str/min Gujdpfxsx Engve Ag Dek Adjustable cutting device: 2°30' Number of sheet holders: 15x

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Guedpfx Agjxmvl Tj Djk Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Guodpfx Agsx Da D Ue Dek Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry Gedpfxsx A S D De Ag Djuk

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm Guedpex A Tpnefx Ag Djk – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: excellent (used), Hydraulic Guillotine Shear (used) Manufacturer: VOLZ Euro-Cut Model: 6.5 x 3050 Year of manufacture: 2002 Max. cutting length: 3050 mm Max. plate thickness (ST 45): 6.5 mm Distance between side frames: 3050 mm Guodpfx Agjx Ag Scj Dek Motorized back gauge adjustment: 20 – 1000 mm Cutting angle adjustment: hydraulic Hold-down clamps: 18 pieces Motor power: 11 kW Machine weight: approx. 5100 kg Required space: Width 3830 mm, Depth 2865 mm, Height 1700 mm Foot switch Angle stop Front support arms Motorized back gauge adjustment Cutting edge illumination The machine is in very well-maintained condition and is immediately ready for operation. Forklift available, free loading onto truck Low-cost shipping available Machine location: 59510 Lippetal

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Elgo achteraanslag Handmatige messpelingafstelling Inloopbeveiliging aan de achterzijde Gsdpjv Taiasfx Ag Deuk Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Guodpsxxr H Rsfx Ag Dek Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Guedpsxxd D Ujfx Ag Dok Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)