Used Double miter saws for sale (43)

Condition: not inspected (used), Year of construction: 2015, Machine/vehicle number: F00112, 6500 mm jaw feed Remaining piece flap H8Mnl8F strip deviation control Micronizer SLE 600 Extension version M330 3M Vertical roller VR-M Remaining piece remover DSTV interface

Condition: new, Year of construction: 2022, Functionality: fully functional, Machine/vehicle number: 01/6868/0422, DS350 Exenso DS350E - 3000mm (RS) with waste chute Manufacturer: HECHT Year of construction: 2022 Model number: DS350 Exenso DS350E Serial number 01/6868/0422 Object number ON002588 Description: - DS350 Exenso DS350E - 3000mm (RS) with drop chute Swivel range 30° (inside) to 135° (outside) - Left head movable. - Saw heads offset approx. 80mm to the front for waste conveyor belt. - Outer table support plates arranged as an inclined plane. - Saw blade holder Ø 350 mm for wooden glazing beads, glazing bars, profile strips, aluminum strips, etc. - Working length 3000 mm - Incl. 1 piece. Center support. - Pneumatic clamping of the units. - Exenso DS3 positioning control with touch panel - 15" display in dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list - Processing of measuring rod data (radio caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses - DS feed device hydropneumatic (instead of pneumatic feed cylinder) - DS dosing/spraying device for aluminum strips (control via the manufacturer's software) - DS workpiece clamping combined => Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping the material from above. (Free access to the work table) Horizontal pneumatic clamping device - twist-proof clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control unit. Incl. safety pre-tensioning pressure. Scope of delivery: 2 swing clamps / 2 horizontal clamps Note: prepared for mounting the quick-change jaws. - DS Saw blade HM 350x3.0/2.2/30 Z 112 (aluminum G7) trapezoidal / flat tooth - positive (2 pieces) - Exenso interface RS232 Blnzd9I9W8R - DS 350 outfeed conveyor package The sawing units are equipped with an inclined chute on one side. - Left unit to the left of the saw blade - Right unit to the right of the saw blade - this allows the waste piece to slide onto the waste conveyor belt. The waste conveyor belt is located underneath the units. Running direction to the right. The residual or waste pieces are collected in a container provided by the customer. Width approx. 150 mm Length approx. 3,500 mm - Quick-change clamping jaws for DS swing clamps (4 pieces) - Label printer connection - DS350 blow-off device - Fan-type blowing nozzle. - Flexible arm for alignment with the cut material. - Adjustable blowing time coupled with the feed of the sawing unit. - Moving roller conveyor for DS 350-310- K-4000 with plastic rollers, working length 3,000 mm incl. 1 adjustable foot with working height 910 mm + 50 mm height adjustment. 1 piece. Standard mounting bracket for attachment to a machine stand Condition: ^^^^ NEW ^^^^ Manual: yes Data sheet: yes >> The double miter saw can be inspected on site. Payment: prepayment or cash on collection Collection will then take place by appointment. You will receive an invoice from us with VAT shown. Due to logistics, we only work with European customers.

Condition: excellent (used), Year of construction: 2021, Operating hours: 1,000 h, Functionality: fully functional, Machine/vehicle number: C126899, Cutting length (max.): 7,000 mm, Precision TS2 TU/5 double mitre saw D7V2Vzg

Condition: good (used), Functionality: fully functional, Saw blade diameter: 320 mm, Total length: 2,600 mm, Total height: 2,000 mm, Overall weight: 1,600 kg, This saw has been retrofitted with a Siemens PLC S7-1200 with 20 programs and 3 languages. See video attached. The PLC is unlocked and can be modified to suit your requirements if desired. Uq9Unzhyxt Spec: Max. cutting capacity 90° 320 mm Max. cutting capacity 45° 320 mm Blade length 320 mm Motor power 2.2 kW Length x width x height 2600.0 × 2300.0 × 2000.0 Weight 1600 kg – Multiple feed – Stepless hydr. cutting pressure regulation

Condition: excellent (used), Feeder Make Elu Type MVA 34 Speed infinitely variable Motor 380 Volt Cty7Lj97Se 600 kw Weight 60 kg

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, 3-axis rod machining center Elumatec, SBZ122/30 second-hand, year of manufacture 09/2007 M.-No. 1223030165 Equipment and accessories: - automatic tool change with 4 tool unloading places - safety light barrier - automatic clamp recognition Gpbt0O - material stop - roller conveyor for overlength processing - 2x tool holders ER32 - 3x tool holders 077, short version - 1x quick-action chuck angle head

Condition: good (used), useful cutting length : 5000 mm maximum blade diameter : 500 mm electronic tilting of heads Internal and external tilting Vertical clamps usb port Uggxkozzqf

Condition: used, Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very Beiwoka little use.

Condition: excellent (used), Year of construction: 1997, Swivel range inwards 90° - 45 ( manual with digital display) Tilt range inwards pneumatically 90° - 45° Cutting range see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Ulcikcm7Wf Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per work cycle 40 l without spraying, 64 l with spraying Cutting length variant 4500 mm

Condition: new, Year of construction: 2024, The 500 D2K is an automatic moving double mitre saw with electronic positioning (X-axis) over 4000 or 5000mm, the saw heads swivel pneumatically via cylinders from 90° to 22°30' outside. Intermediate angles are achieved by a manually adjustable stop. The saw blade feed is actuated by a hydropneumatic cylinder with output speed regulator and fast return. Thanks to a horizontal clamping system with double cylinder and a vertical clamping cylinder, perfect clamping of all types of profiles is guaranteed. The pneumatically lowerable guards isolate the sawing units during the cut, ensuring excellent protection and ease of use. protection and easy operation of the machine. D2K is a latest generation machine that can be easily integrated into the production cycle thanks to the man-machine interfaces with touch screen, which allows easy programming of all cutting operations. integrated into the production cycle. Option: industrial label printer for identification and assignment to the respective job 3Ebm8Hqa

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Ojigv Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Year of construction: 1992, Condition: used, Machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm Tf3Stl space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Condition: good (used), Year of construction: 2005, Double-head sawing machine with automatic displacement of the moving head, Hu3Mde8 suitable for cutting profiles of iron and stainless steel. the machine can automatically move both heads at an angle of 45° and 90°. minimum cutting length: 475mm maximum cutting length 6200mm saw blade diameter 325mm saw blade feed speed adjustable between 0 and 60mm/s cutting speed 0,7 and 1,4 m/s air pressure 6-8 bar maximum power 4.8kw 400volt machine dimensions 7500x1900x1300mm weight 1600kg year of construction 2005

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm Q8Vqj square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: excellent (used), Year of construction: 2004, -Cutting range for V-cuts Cutting depth 80 mm, profile height 100 mm Saw blade diameter 300 mm -Saw blade speed 2,800 1/min. -Electrical connection 230/400 V, 3~, 50 Hz -Power output per motor 0.9 kW J0Nyvi2Q -Compressed air connection 7 bar -Air consumption per work cycle 20 l without spraying, 44 l with spraying -Length 980 mm, depth 800 mm, height 1,650 mm, -Weight 240 kg

Condition: new, Year of construction: 2024, The CTE 600 is a double mitre saw with 3 controlled axes and a saw blade diameter of 600 mm. The rotary axes of the two saw heads allow the saw units to be adjusted at an angle of 45° inwards and up to 20° outwards. The saw feed is guided by linear guide rails with recirculating ball bearings and is driven by a hydropneumatic cylinder with infinitely variable feed adjustment and fast return. The 600 TSE is a latest-generation machine that can be integrated into the production cycle with remarkable ease of use thanks to the 15-inch touchscreen monitor on the Windows Embedded platform, which allows easy programming of all cutting operations. Please also note our used warehouse machines from Emmegi, Elumatec, Pressta Eisele etc. B3Hwkmkna8

Condition: used, saw blade diameter: 420 mm revolution per minute: U/min cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm Bxqu7Gq9O air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D.

Year of construction: 2023, Condition: as good as new (ex-display), Cutting length (max.): 4,500 mm, Saw blade diameter: 550 mm, Powerful double miter saw, ideal for mass cutting of plastic and aluminum profiles with 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle "sawing from below" for optimum accessibility and best possible utilization of the saw blade. - Minimized calculation effort thanks to outside dimension cut. - Pneumatic angular positioning 90° or 45". - Protective shields with automatic lowering above the sawing areas. - Top and bottom exhaust ports as standard. - Steel machine bed in column design. PC control E 590/1: - Industrial PC 1-axis control E590/1 for cutting length (X-axis). - Drive-independent absolute measuring system - Pneumatic blocking on position - Robust, low-wear direct drive of the mobile saw unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm per meter - PC with Windows operating system - Language switching - Switchover mm /inch - 12# touch screen - Touch optimized user interface - Interface for NEDO measuring rod and scanner - USB interface for data exchange - Network connection for integration in company network - Software module cross-cut and overlength as standard Technical data: - Cutting length: 4,500 mm, minimum 400 mm - Tilting range: basic position 90°, tilting to 45° inwards (45°) - Maximum cutting range: see cutting diagram - Saw blade speed: 2.800 1/min Bakjx9Nweym - Power: 4 kW per motor at 400 V /50 Hz - Compressed air supply: 7 bar - Air consumption: 40 I per working cycle, with minimum lubrication 64 | Machine equipment: -Each 1 vertical clamping device per unit - Minimum quantity lubrication - Intermediate angle manual per aggregate, digital, stationary - Intermediate angle manual per aggregate, digital, mobile - Workpiece support mobile

Condition: used, Year of construction: 1976, Elu double mitre saw DG 79 Bn2Hwjo9Kma

Condition: good (used), Year of construction: 2019, Functionality: fully functional, SW 453 PLUG (PRODUCTION YEAR 2019) is a double-head aluminum saw with horizontal feed of cutting discs. And an external inclination of the blade. Equipped with one fixed head and one electronically controlled moving head. Pneumatic setting of both cutting discs in positions: 90°, 45°, 22.5°, and with mechanical locking in all intermediate positions. Variants: Dpqvnh Maximum cutting on two heads: 5000mm (plus oversize cutting) Materials: Aluminum, PVC Configuration: import of the cut list (from the LiczOkno program, among others); optimization of the cut list; control center using PLC with 5.7″ LCD display label printer; automatic calibration;

Condition: used, Year of construction: 2023, Double mitre saw very good condition / as good as new Make: ELUMATEC Model: DG 104 E 390/1 Year of manufacture: 2023 Optimal double miter saw for series series production and special construction The universal pivoting and tilting of the saw units enables the sawing of high and high and wide profiles as well as all types all types of miter cuts. This many profiles can be cut without can be cut without shims. External dimension cuts possible for all cutting variants possible. This means no more cumbersome length calculations. Technical data: NC control Cutting diameter See diagram Saw blade diam. 420 mm Cutting length 350-6000 mm Number of axes 3 Dpo2Xt Total power requirement 8.6 kW Small cutting length 90° - 350 mm Small cutting length 45° inclined 350 mm Inclination range inwards pneumatic 90° - 45° Inward tilt range electric 90° - 22,5° Saw blade speed 2800 rpm Compressed air connection 7 bar Equipment: Profile levers for stat. And mov. unit Mobile workpiece support Moving roller conveyor 1500x300 mm Positioning control E 390 Machine weight: 1780 kg.

Condition: new, Year of construction: 2024, The 500 TS is an automatic double mitre saw with pneumatic saw head rotation and a saw blade diameter of 500 mm. The rotation axes of the two saw heads allow the saw units to be adjusted outwards at an angle of 90° to 22°30'. The saw blade is driven by a hydropneumatic cylinder with infinitely variable feed adjustment and fast return. Windows Embedded operating system Storage of profile data (up to 1000) Optimization on cutting lists Touchscreen industrial PC panel TFT 15" USB port Ethernet port for LAN connection B3Hxoexqew Illustration may include special accessories Please also note our used storage machines from Emmegi, Elumatec, Pressta Eisele etc.

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kw, 380 Volt 2 speeds Double miter cuts possible Ca0Gcjkmpo

Condition: good (used), Year of construction: 1991, Maximum cutting length : 6000 mm Maximum sawblade diameter : 550 mm Cg08Hcmkve Pneumatic clamps : 2 x 2 pc. 2 hand operated Cutting angle : 90 - 45 degree Emergency push button

Condition: new, Year of construction: 2024, The 500 TSE is a double miter saw with 3 controlled axes and a saw blade diameter of 500 mm. The rotary axes of the two saw heads allow the saw units to be adjusted at an angle of 45° inwards and up to 20° outwards. The saw blade is driven by a hydropneumatic cylinder with stepless feed adjustment and quick return. Zmpts The 500 TSE is a latest generation machine that can be integrated into the production cycle with remarkable ease of use thanks to the 15" touch screen monitor on the Windows Embedded platform that allows easy programming of all cutting operations. See also our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.