Used Feintool for sale (7)

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Lajdpfx Abouqdxio Uoh Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Automation roll-off try with leveller

Condition: used, Year of construction: 1988, Technical details: pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit * Laedpfjvmht Hjx Ab Uoh

Condition: like new (used), Year of construction: 1989, operating hours: 810 h, functionality: fully functional, machine/vehicle number: 892161, total height: 2,860 mm, sheet thickness (max.): 6 mm, total width: 2,425 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, pressing force: 160 t, Here you have the unique opportunity to purchase a Feintool GKP F 160 that has seen barely any use. The machine has only 810 operating hours. As you can see from the photos, the machine is in excellent condition. We acquired the press in 2019, but, just like the previous owner, never put it into operation. The machine was test run without tooling at our facility and is fully functional. An on-site inspection under power is possible by arrangement. Technical specifications of the FEINTOOL GKP F 160 fineblanking press: - Maximum sheet thickness: 6 mm - Maximum sheet width: 210 mm - Total force including auxiliary functions: 160 t - Shearing force: 100 t - Hydraulic counterforce (upper bolster): 1–40 t - Hydraulic force of the ring blank holder (lower bolster): 12–50 t - Ejector force (pump pressure): 4–8 t - Hydraulic shearing force: 7.5 t - Pneumatic shearing force: 6.6 t - Slide stroke: 61 mm - Maximum number of strokes: 72/min Lasdpfx Absumigqe Ujh - Minimum number of strokes: 18/min - Motor power: 11 kW - Pump capacity: 4 kW - Air supply: 6 bar - Dimensions (L x W x H): 2380 x 1870 x 2860 mm - Weight of machine GKP F 160: 9000 kg

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Ljdeu Dalyepfx Ab Ueah

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm Ljdpfjvwgl Njx Ab Usah ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: ready for operation (used), Year of construction: 1996, 630T press retrofitted in 2010 by the company LITOSTROJ RAVNE Capacity: 630 tons Total power: 15 - 630 tons Ring power: 10 - 230 tons Laedjhh Hwlopfx Ab Uoh Lifting power: 50 tons max Back pressure power: 5 - 120 tons Ejection power: 22 tons max Max slide stroke: 180 mm Ring race: 30 mm Back pressure stroke: 30 mm Slide surface: 900 x 900 mm Table surface: 900 x 900 mm Number of strokes: 28 - 72 s.p.m. Power requirement: 80 kW Default configuration

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Lsdpfx Aou U Nimjb Usah Automation roll-off try with leveller