Used Horizontal band saws - manual - cutting range 221-299mm for sale (80)

Condition: used, Year of construction: 1999, cutting diameter 300 mm saw band length 3320 x 27 x 0.9 mm mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: round 180 mm workpiece height max. 870 mm total power requirement 2.2 / 2.5 kW Cxtzmx8Slq weight of the machine ca. 1100 kg dimensions of the machine ca. 1945 x 2294 x 1982 mm

Condition: used, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - For miter cuts, the saw bow can be swiveled up to 60° - Continuously adjustable lowering via hydraulic lowering cylinder - Torsion-free, heavily dimensioned saw arm made of gray cast iron - 2 saw blade speeds for optimal cutting results (400 V) - Robust construction, therefore quiet and vibration-free operation - Automatic limit switch after material cut - Robust vice made of gray cast iron with quick lock - Ball-bearing saw blade guide with quick adjustment for adaptation to the - workpiece width guarantees an optimal work result Scope of delivery: - Saw blade - Workpiece stop - Base frame - Pressure gauge for blade tension Csmt3Guciq - Vice with quick lock - Coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch Special accessories included: - 1x used Roller conveyor - OUTPUT - with stop - 1x used roller conveyor - FEED - without stop

Condition: new, Top quality from Taiwan ! Sawing band --- 2480 x 27 x 0.9 mm Cutting speed --- 45 / 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0 225 mm 190 mm 150 x 245 mm Cutting capacity 45 145 mm 150 mm 150 x 190 mm Cutting capacity 60 90 mm 90 x 120 mm INCLUDED * Adjustable material clamp * Graduation to 60 gr. * Automatic switch off * Low-noise electric motor * Closed worm gear * Hydraulic pressure control * CE emergency stop * Cooling pump Osemn * Base cabinet * Quick Release Clamp * Saw Belt

Condition: new, Machine in stock and immediately available Double mitre metal band saw S 255 DG cutting range round / square 90°: 255 mm / 210 x 210 mm cutting range flat 90°: 310 x 210 mm Cutting range round / square 45°, right: 220 mm / 210 x 210 mm 7Pcfcxm Cutting range flat 45°, right: 220 x 200 mm Cutting range round / square 45°, left: 230 mm / 200 x 200 mm Cutting range flat 45°, left: 230 x 200 mm Cutting range round / square 60°, right: 135 mm / 135 x 135 mm Cutting range flat 60°, right: 135 x 135 mm saw blade dimension: 2750 x 27 x 0,9 mm cutting speeds: 35 / 70 m/min Motor input power S6 40%: 2,2 kW working height: 930 mm Scope of delivery: - Saw blade - material stop - Manometer (band tension) - Saw band carbide guides - Vice with quick clamp - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic limit switch - Underframe

Condition: new, Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: Wdt8Wnw round flat square 90° round 278 mm / flat 340 x 275 mm / quadr. 275 mm 45° R round 260 mm / flat 320 x 255 mm / squared 230 mm 30° R round 155 mm / flat 145 x 115 mm / squared 115 mm 45° L round 205 mm / flat 275 x 180 mm / squared 180 mm Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension

Condition: excellent (used), Functionality: fully functional, BOMAR automatic band saw in very good condition. can be set to cut from 90 to 45 degrees Dqnkij

Condition: used, Year of construction: 2000, cutting diameter 210 mm saw band length 2750 mm cutting width 270 mm dimensions of saw-band 2750 x 27 x 0,9 mm capacity 90 degrees: round 210 mm capacity 90 degrees: flat 270 x 200 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 180 x 190 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 100 mm capacity 60 degrees: flat 120 x 90 mm Cv3C2Djovm capacity 60 degrees: square 90 mm weight of the machine ca. 300 kg dimensions of the machine ca. 1000 x 1500 x 1600 mm Furnishing: - Coolant device - band saw blades

Condition: new, Year of construction: 2023, Band saw for cutting steel materials and profiles of medium cross-sections. Saw operation in two modes: manual or with automatic controlled bow lowering by means of a hydraulic cylinder. Allows cutting at angles from 0 ° to 60 ° to the right and up to 45 ° to the left. Possibility to choose two cutting speeds (slower 32 and faster 64m / min). Engine start switch attached to bow pull bracket. Control panel mounted on the side fixed support. Caivjegwmx Added electric pump to cool and lubricate the blade during cutting. Steel base included. TECHNICAL INFORMATION Three-phase electric motor: 0.75-1.1 kW Electric pump: 0.07 kW Reducer: 40/1 l Wheel diameter: 290 mm Cutting speeds: 32/64 m / min Max. clamp opening: 250 mm Blade dimension: 2450x27x0.9 mm Working height: 980 mm Dimensions of the machine: 1020x1890x1900 Machine weight: 255 Kg

Condition: new, Sawing band --- 2480 x 27 x 0.9 mm Sawing speed --- 20~90 M/min variable Motor --- 400V - 1.5 kW Weight --- 200 kg Cutting capacity 90 ----- 225 mm / 245 x 180 mm Cutting capacity 60 ----- 100 mm / 100 x 100 mm Cutting capacity 45 ----- 160 mm / 160 x 115 mm Cbzg7Vmzn3 INCLUDED * Adjustable material clamp * Graduation to 60 gr. * Automatic switch-off * Low-noise electric motor * Closed worm gear * Hydraulic pressure control * CE emergency stop * Cooling pump * Base cabinet * Quick Release Clamp * Saw Belt

Condition: used, Year of construction: 2013, cutting diameter 250 mm capacity 90 degrees: flat 250 x 450 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 250 x 190 mm table height ca. 650 mm saw band length 3300 mm dimensions of saw-band 3300 x 27 x 0,9 mm cutting speed 21 - 62 m/min total power requirement 1.5 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1739 x 571 x 1130 mm Bsn00Iweu8S very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: ?machineno=1008-9173350

Condition: new, semi-automatic bandsaw with double-sided miter R/L 60° incl. hydraulic band tensioning display Minimal quantity lubrication can be retrofitted Cutting capacity 90° square, approximately 280 mm / flat 410 x 280 mm. 280 mm 45° round R 280 mm / flat 310 x 150 mm square. 270 mm 45° L round flat 330 x 100 mm/280 mm / square. 280 mm 60° R round flat 205 x 100 mm, 210 mm / square. 190 mm Bdsuvltmzf 60° L round 220 mm / flat 225 x 100 mm square. 210 mm material circulation 756 mm Blade dimension 3800 x 0, 9x27mm Cutting speed 20-120 m / min. Transmission-2,2 kW Dimensions Lxwxh 2130 x 1070 x 1440 mm Weight 530 kg Price on request

Condition: used, Year of construction: 1986, cutting diameter 400 mm saw band length 5680 mm cutting width 450 mm dimensions of saw-band mm Cudvvzrx cutting speed Stufenlos m/min Length of roller conveyors - outfeed mm Length of roller conveyors - infeed mm total power requirement 3,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: new, Horiz. Miter band saw, double miter band saw BERNARDO Type MBS 315 DG-VR PRO Band saw for metalworking with swiveling saw bow. New machine from year of manufacture 2023 Fabr. Nr. 20231800 K8R92Jgu Sawing range at 90° round Ø 255 mm Sawing range at 90° square 255 x 255 mm sawing range at 90° rectangle H160 x 310 mm Sawing area at 45° round Ø 185 mm Sawing area at 45° square 180 x 180 mm Sawing area at 45° rectangle H230 x 170 mm Sawing area at 60° round Ø 115 mm Sawing area at 60° square 115 x 115 mm Sawing area at 60° rectangle H160 x 115 mm Sawing area at -45° round Ø 180 mm Sawing area at -45° square 170 x 170 mm Sawing range at -45° rectangle H220 x 140 mm saw band 2750 x 27 x 0,9 mm Roll diameter 300 mm band speed 20 to 80 m/min. infinitely variable miter cut stepless quick adjustment working height 980 mm motor power 1,5 kW Connected load 400 Volt, 50 Hz - Swiveling saw bow for double miter cutting to the left (-45°) and to the right (+60°) - saw band speed infinitely variable via rotary potentiometer - Infinitely variable lowering via hydraulic lowering cylinder - automatic limit stop after material average - pressure gauge for band tension - Quick-action vice for double miter cutting can be shifted - Coolant device with electric pump - Workpiece stop Space requirement L x W x H 1750 x 820 x 1600 mm weight 390 kg Price quotation is for a fully assembled machine, as shown.

Condition: new, Year of construction: 2024, The CORMAK BS-320 band saw, thanks to the equipping it with a hydraulic cylinder, cooling system and a swivel arm up to 60 °, in conjunction with blades of the renowned German company Rontgen, is widely used in all locksmith workshops, where precision, quality and cutting speed are most important. Machine description The horizontal band saw for metals with a swivel arm enables cutting in a plane perpendicular to the axis of the cut material and at any angle in the range from -45 ° to 60 °. The material to be cut can be fed manually or with any mechanical device, while the tool feed is automatic. Tape guides are equipped with special carbide inserts and bearings. This has a huge impact on the belt guiding, its service life, straightness, accuracy and quality of the cut. Carbide guiding significantly reduces the wear of the machine and the saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect cleanliness and blade function. The machine is driven by a worm gear. The machine has a three-phase motor with two cutting speeds and thermal motor protection. The cutter has a CLOCK TENSOMETER - a band tension sensor and an automatic switch in the event of a cutting band breaking. Ri3Yf The design of the upper part of the base serves as a basin for draining the coolant and catching the chips produced during the cutting of the material. A cast iron workbench with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the movement of the lower arm. The speed of the arm drop (cutting speed) is regulated by a hydraulic actuator. The feed rate is regulated on the cutting machine's control panel. We can choose between two speeds of the cutting band: 37.5 and 75 m / min. In the lower position of the arm (after cutting the material), the saw band drive is automatically turned off. Safety will be ensured by cutting band covers and micro switches stopping the engine operation after the end of the cutting cycle or opening any of the covers, additional protection consists in switching off the cutter automatically in the event of the cutting band breaking. Technical parameters Size of the cutting band 2680 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 37.5.75 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 950 mm Diameter of saw wheel 300 mm Power 3phase, 400V Main engine power 1.5 / 1.1 kW Cooling pump motor power 40W Dimensions with base 2000 x 860 x 1500 (1900) mm Weight 246 kg Angle 0º ---ø245 320 x 195 245 x 245 45º L ø190 200 x 100 155 x 155 -----110 x 245 45ºR ø190 200 x 180 190 x 190 60º R ø130 120 x 140 130 x 130 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, saw band length: 5,800 mm, saw band width: 41 mm, total height: 2,000 mm, total length: 1,200 mm, total width: 2,800 mm, cutting range round at 90°: 410 mm, cutting width (max.): 700 mm, overall weight: 1,650 kg, cutting height (max.): 410 mm, remaining piece length: 160 mm, MEBA 410 90 degree saw built in 2019 / Service was carried out regularly Bshbohetlqq Options: Minimum speed monitoring / clamping pressure regulation / bundle clamping / driven chip brush / material feed 1000mm + 2000mm / new price 35.000€ Machine can be inspected at the customer's premises and is sold directly by the customer

Year of construction: 1986, Condition: used, cutting width max. 500 mm Cutting height max. 260 mm Cnq9Rxpu miter manuell verstellbar saw band length 3600 - 3660 mm 13863 86 Year ca. 1986

Condition: new, 1 brand new horizontal band saw machine with double miter Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm Ped8Hsy -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 760 mm Motor power main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0,12 kW 2 speeds 35 / 70 m/min saw band dimensions 2730 x 27 x 0,9 mm dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / special features: - Mitering on both sides by means of a swivel frame o The material to be cut remains straight in the room! o No turning of the material during miter cuts! o High efficiency with enormous time saving! - Set precision fences 0°, 45° and 60° left and 45° right - Interchangeable work table - Quick-action vice, laterally adjustable to the left and to the right - Adjustable length stop 500 mm for cuts of the same length - The lowering of the saw arm is continuously regulated by a hydraulic cycle - Coolant system - Chip brush - Swiveling control panel - Electr. safety switch for blade tension and saw blade cover - Limit stop at end of cut - Emergency stop switch - CE-conform Delivery time: currently immediately, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm Csickurd dimensions of saw-band mm cutting speed Stufenlos m/min Length of roller conveyors - outfeed mm Length of roller conveyors - infeed mm total power requirement 2,4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Year of construction: 1978, Condition: used, horiz. Band saw, make Bauer, type S260, year 1978 Clolu07

Condition: new, Year of construction: 2024, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Ri3Xh Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2024, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 Ogedh 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: new, Year of construction: 2024, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW Ri327 TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2024, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 Bcft7Lans 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2024, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Gw38Eom

Condition: new, Year of construction: 2024, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle C2R3Vqap 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.