Band saws - horizontal - half-automatic - cutting range 350-419mm for sale
Your location was not identified (Edit)
4
cutting diameter 400 mm
saw band length 4.870 mm
Bisxkvnif9
cutting width 400 mm
height of material-table 700 mm
dimensions of saw-band 4.870 x 41 x 1,3 mm
cutting speed 26 / 35 / 53 / 71 / 89 m/min
power capacity 3,0 kW
voltage 400 V
coolant
total power requirement 4,2 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 2,40 x 1,30 x 1,90 m
- Serial-No.: 148058 more
2012
as good as new (ex-display)
:350 x 220 mm
:270 mm
:260 mm
:240 mm
:210 mm
:240 x 160 mm
:180 x 180 mm
:220 mm
:180 mm
:160 mm
:150 x 150 mm
:150 mm
sawing motor:0,75 - 1,5 kW
Biid8m7p9g
:0,37 kW
coolant pump:0,12 kW
band speed:34 - 68 m/min
dimensions of saw-band:3.160 x 27 x 0,9 mm
work height max.:900 mm
dimensions:1.730 x 770 x 1.550 mm
weight of the machine ca.:500 kg
semi automatic:nur bei BMSY 270 DG / H
:nur bei BMSY 270 DGH
:995,- ? more
2020
new
cutting diameter 360 mm
saw band length 5000 x 34 x 1,1 mm
cutting width 700 mm
work height max. 860 mm
band speed 20-100 m/min
Capacity 90° rectangular 700 x 360 mm
360 mm
360 mm
Capacity 45° rectangular 450 x 360 mm
360 mm
360 mm
590 x 360 mm
Vyvyk3bv
cutting range 360 mm
total power requirement 3 kW
weight of the machine ca. 1,46 t
dimensions of the machine ca. 2850 x 780 x 1800 m
Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and
+30°. Auto height adjust... more
9
ready for operation (used)
Semi-automatic hydraulic underfloor circular saw
with manual control of the outlet height
Supplied accessories:
2 vertical clamping devices
1 horizontal clamping devices
Saw blade diameter up to 350 mm
Cutting range at 90°: round 110 mm, square 100 mm,
rectangle 180 x 40 mm or 160 x 85 mm
at 45°: round 110 mm, square 100 mm
Mitre adjustable Li + Re each 0 - 90 °
2 cutting speeds 16 + 32 m/min
Drive 380 V / 1.2 / 1.8 kW
Feed speed of the saw blade infinitely variable
Space requirement approx. W 6... more
1
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
450x320
saw band length 4250x34x1,1 mm
band speed 15 - 100 m/min
Benv3tx03m
table height 845 mm
saw band width 34 mm
total power requirement 2,2 kW
weight of the machine ca. 0,985 t
dimensions of the machine ca. 1,4 x 2,0 x 2,2 m more
6
cutting diameter 455 mm
saw band length 5620 mm
- max. cutting height 455 mm
-----
TECHNICAL SPECIFICATION
Bcapjaip0m
ELECTRICAL SPECIFICATIONS
- total power consumption 5 kW
DIMENSIONS / WEIGHTS
- space requirements -left/right- 3100 mm
- space requirements -front/back- 1200 mm
- total height 1670 mm
height including turning device: 2610 mm for mitre joint.
roll guideway 12 m more
12
2007
excellent (used)
Metal band saw
MEP Shark 281
FY 2007
Very well maintained
MEP Cut Control System
400 V 16 A 1,93 KW
Air supply 6 Bar
Weight 370 Kg
length 1,50 m
width 0,80 m
height 1,50 m
Lnbezfl2
Spare saw band 2950x27x0,9
1 pc. roller table PIT 520 W= 86 cm H= 86 cm L= 1,55 m
1 pc roller table W= 60 cm H=86 cm L= 1,55 m more
10
Band saw metal band saw horizontal band saw Habush CY355 semi-automatic
The CY355 is the perfect universal band saw for any metalworker, craftsman or other company
Type:
The machine is suitable for cutting steel, stainless steel and aluminum profiles.
Saw belt guide with carbide and ball bearings
Manometer for belt tension
Ergonomic handle
Electric cooling pump
Hydraulic lowering of the saw frame (infinitely adjustable)
Automatic final shutdown
2 switchable saw speeds
with stable substructure... more
6
1996
ready for operation (used)
Sofort ab Standort frei :
Kasto Automated band saw
Type HBA 360 AU
Baujahr 1996
Schnittbereich rund 360 mm
Vierkant 360 x 360 mm
Antrieb 6 kw
Kleinste zu sägende Abmessung 10 mm Durchmesser
Kleinste Anschnittlänge 6 mm
Größte Abschnittlänge 1800 mm 3 fach
Ca8rqha8
Automatischer Vorschub einfach 600 mm
Schnittgeschwindigkeit stufnlos regelbar 20 . 130 m / min
Rollbahn
Beladetisch
Beladelager
Gewicht 3 to more
2020
new
cutting diameter 380 mm
saw band length 4800 x 34 x 1,1 mm
cutting width 430 mm
380 mm
Capacity 90° rectangular 430 x 380 mm
cutting speed 20 - 100 m/min
total power requirement 3,67 kW
weight of the machine ca. 1,342 t
dimensions of the machine ca. 2,9 x 0,85 x 1,66 m
Fully automatic band saw for cutting solid material, tubes and profiles of steel,
cast-iron, light and non ferrous materials, at 90°. Entirely made of steel.
The rear jaw of the hydraulic vice has a number of hardened roller... more
1
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
450x320
saw band length 4250x27x1,1 mm
band speed 40 + 80 m/min
table height 850 mm
total power requirement 1,7/2,2 kW
weight of the machine ca. 0,865 t
Nlnan
dimensions of the machine ca. 0,9 x 2,5 x 2,2 m more
5
Rollertables all sizes and for all transportation weights
Manually and Automatic Lengthstops
O2dvmh0
Readout with ruler or digital or automatic controler
For all kind of saw and drilling machines. more
1977
reconditioned (used)
Band saw with automatic lowering
Technical data:
- saw band dimensions 4870 x 27 x 0,9 mm
- saw band speed 20, 30, 40 and 60 m/min
- saw frame feed, infinitely variable with cutting pressure regulation
- max. clamping capacity 400 mm
- miter vise
- Cooling device
- Drive 400 V / 1 kW
- Space requirement approx. W 2300 x H 1350 x D 900 mm
Bik8pptsc9
Cutting range:
90° round approx. 400 mm flat approx. 380 x 400 mm
45° round approx. 300 mm flat approx. 330 x 300 mm
60° round approx. 120 mm flat ap... more
4
Forte SBA 401S
Year of construction: 1986
- Cutting area at 90 ° around 400 mm
- flat 400 x 400 mm
- Automatic material feeder max single stroke 600 mm
- Max. Section length in multiple stroke 1200 mm
Bia7f9phq3
- Saw band dimensions 6200 x 38 x 1.2 mm
- Cutting speed infinitely 12 - 100 m / min
- Cutting pressure continuously adjustable 0 - 10 m / min
- Hydraulic material clamping with clamping pressure regulation
- coolant device
- Chip conveyor
- Total drive power 400 V / 9.5 kW
- space requ... more
1
14
1992
good (used)
Masch. No. 4690022
Cutting area round Ø 305 mm
Square 305 x 305 mm
Saw band dimensions 4900 x 32 x 1.1 mm
Saw band speed 25-130 m / min. infinitely variable
Material inlet height approx. 870 mm
Drive power hydraulics 1.5 kW
Drive power saw motor 4 kW
400 volts, 50 Hz
- Fully hydraulic two-column band saw
- Hydraulic saw arm lowering
with stepless cutting pressure adjustment
- Lowering speed infinitely adjustable
- Hydraulic vice clamping, bundle clamping
C7neasb
- Hydraulic unit integrated ... more
1
355 mm
350 x 350 mm
saw band length 4640 x 34 x 1,1 mm
table height mm
band speed 15 - 115 m/min
Nw8nv
total power requirement 4,0 kW
weight of the machine ca. 2,8 t
dimensions 3,1 x 2,2 x 2,2 m more
6
Cutting area: 355 mm,
Bcteck0qm3
Projection: 1005 mm,
Drive type: el / mech.,.
Drive: 1.5 kW
Comment:.
Butt welding equipment
Belt speed 82-1312 m / min,
infinitely variable speed control,
Weight: 800 kg more
5
cutting area round: 400 mm
cutting area square: 400 mm
Lefzgpluu
simple forward feed length: 600 mm
sawing band measures: 6200 x 38 x 1,3 mm
band speed: 12 - 100 m/min
sawing drive: 380 V, 7,5 kW
space needed: 2850 x 2100 x 1900 mm
weight: ca. 3000 kg more
4
The individual 520.360 DGH machine is a semi-automatic Doppelgehrungs band saw in a two column version. Miter the saw has a range of 30 ° stepless left to 30 ° right. The model has individual 520.360 DGH a hydraulic full hub Vice and an easy to use software in plain text display.
standard equipment details
• Double miter 30°-45 ° - 90 ° - 45 ° - 30°
• Hydraulic full hub Vice
• Saw frame on preloaded linear guides stored
• Infinitely variable blade speed
• Continuously adjustable saw feed and cu... more
1
2-column guided band saw in semi-automatic design with infinitely variable mitre adjustment on both sides 30° - 45° - 90° - 135°.
With patented miter system (ERP No. 0491120)
Particularly suitable for universal use with various
Cross sections, materials and frequently changing mitre cuts.
Center of rotation unchanged at every angle setting, thus exact length measurement at 90° and in the mitre area.
MEBA Eco Saw Innovation 2000
The universal mitre band saw MEBA 335 DG
is ergonomically mature an... more
10
Technical data:
-Band saw blade dimensions 3930 x 27 x 1.1 mm
Becs29b3ve
-Cutting speeds stepless 18-100 m / min
-Hydr. Cutting pressure regulation
-Hydr.-lifting + lowering the saw frame
-Left + right miter-adjustable
-Cutting area
-at 90 ° around 350 mm
-square flat 330 x 330 mm
-flat 450 x 320 mm
-round 340 mm at 45 °
-flat 320 x 320 mm
-at 60 ° left around 210 mm
-Max opening width of the Hydr. -Clamping stick 470 mm
-Drive 400 V / 2,2 kW
-Space requirement approx. B H ... more
4
Fast adjustment of mitre, stepless from 30°-135°
The swivel is directly above the intersection of the
saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle
Digital mitre display, accuracy 0.1°
Fast material clamping. Material is always clamped at 90°
regardless of the angle to be cut
Hydraulic material clamping via full-stroke clamp
MEBA – Power-Package “HSS“
Hydraulic lifting and lowering of the saw frame hydraulic
clamping o... more
9
HABUSCH BANDSAEGETYP CY355- Semi-automatic hydraulic traploos adjustable snelheid 20/80 m/min- Dubbel verstek- Zaagdruk hydraulic instelbaar- Koeling- Zaagblad 3770 x 34 x 1,1 mm- Noodstop- Documentation- 400VDUTCHMACHMetallbearbeitungsmaschinenENSCHEDE - NETHERLANDS(3 km from the German border)
Biyvae0zw more
1
BMBS 360 x 500 HA-DG
Semi-automatic swing frame - metal band saw for miter cuts from + 60 ° to - 60 ° frequency inverter
Description
-Semi-automatic swing frame - metal band saw for miter cuts from + 60 ° to - 60 ° frequency inverter
• Designed for industrial use
-For cutting E.g. stainless steel, tool steel, hollow profiles and full materials
Saw band drive with low-maintenance, oil lubricated worm gear
-With robust three-phase motor with overload protection
Blade guide adjustable CARBIDE plat... more
1
Semi-automatic sawing sequence with workpiece clamping - sawing - raising to set height after finished cut - stepless hydraulic cutting pressure and feed monitoring at saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles.Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts. The machine control complies with the CE standard 89/289 Te... more
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Saws
Dealer for Saws
