Crosscut and mitre circular saw GRAULE ZS 170N
optically and technically very good, as good as new condition, the machine comes from a small advertising company and was used only very little, only advertising boxes were cut with it
cutting height: 170mm at 90°
cutting length: 430mm at 90°
year of construction: 1997
the workpiece can be clamped with 2 pneumatic clamping cylinders
with cooling and lubrication device
can be tilted on both sides, to the left up to 70° and to the right up to 45° with...
Schüco automatic profile sawing centre,
Year of construction 2004,
processing length up to 7.500 mm,
profile cross section max. 270 x 160 mm,
angle of rotation B axis +/- 45°,
sawing motor 3 KW,
saw blade speed up to 3.000 rpm,
saw blade Ø 550 mm,
machine dimension 19.500 /3.600/2.500 mm,
saw blade diameter: 450 mm
revolution per minute: 2820 U/min
cutting lenght max.: 5000 mm
cutting length min.: 240 mm
air pressure - required: 6-8 bar
hole of sawblade: 32 mm
mitter cutting - both sides: 45+90 °
total power requirement: ca. 4,6 kW
weight of the machine ca.: 1,1 t
dimension machine xH: 6,05x1,49x1,79 m
- cutting diameter can be seen in a cutting chart of the machine
- clamping pneumatic and horizontal
- pneumatic mist spraying device
- adjustable machine base stands
Aluminium circular saw Saw blade diameter 90 cm
used, good condition, see pictures
Length 2,4 m
width 1,4 m
height 1,8 m
Saw blade diameter 90 cm
cutting area 62 x 26 cm
negotiation price: € 1.500,-- net ex stock
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in ...
Aluminium cross-cut saw with 400 mm blade diameter Horizontal pneumatic clamping deviceFeed side left, 45° swivel of saw unit (right and left) and 45° manual horizontal swivelWith fog spray deviceThe manual actuator for lowering the saw blade is equipped with a mechanical safety device to prevent any unwanted movement.The angular positioning of the saw blade is achieved by swivelling the support table with locking bolts for 45° (right and left) and manual clamping for the intermediate mitres.
Aluminium recessed - circular saw Fabr. Unknown
Saw blade diameter 400 mm
Dimensions L x W x H
-2 pneumatic vertical tensioner
used, in good condition
Used ITALMAC Mod. ZETA 400 P Disk cutting-off machine for single head aluminium
Manual blade feed
Pneumatic inclination for cutting 90° - 45° DX - SX and 20° DX
Saw blade mm 400 X 3.8
Engine : Hp 3
Well new " CE "from end stock!!
Only Nr.01 availability in ready delivery unless sold.
Aluminium circular saw Fabr. KALTENBACH type SKL 400 Fabr.# 46620 built in 1977
Saegeblattdrm. 400 mm
Cutting capacity 90 ° round 135 mm
Cutting capacity 90 ° square 120 x 120 mm
Cutting capacity 90 ° flat 70 x 280 mm
Section 45° square 105 x 105 mm
Section 45° flat 55 x 120 mm
Feed speed 0-3000 mm / min
Drive performance 6.0 HP
Weight 650 kg
Size 910 x 1200 x 1700 mm
-Pneum.. SEK ´ nkrechtspanner
-Measuring roller conveyor
-Evacuation roller conveyor
used, in ver...
- Carbide saw blade 400 mm
- Manual head lowering
- Manual turning of the bed for cutting at 45° 0° 45° and intermediate angles on the vertical axis
- Manual side tilting of the heads for cutting between 0° and 45° external angle on the horizontal axis
- Cast iron plate
- Mechanically controlled protection of cutting area
- Blades lubrication system
- Pair of horizontal pneumatic clamps
- Blade motor power: 2,2 kW
- Blades speed: 3200 rpm
- Power supply: 2,2 kW
- Air consumption: 2 N...
Crosscut saw AS-600 Vorfürmaschine
Incl. blade diameter 600 mm.
Incl. Automatic minimum quantity lubrication.
Incl. smooth lift and manual length stop.
Machine can be visited, by appointment, on the spot.
Underfloor circular saw for aluminium make PRESSTA EISELE EMMEGI type 500 SCA
machine # 191446, year of construction 1987
max saw blade diameter 500 mm
Speed 2890 rpm.
cutting capacity 90° e.g. 170 x 150 mm
or e.g. 100 x 250 mm
cutting range 45° e.g. 170 x 165 mm
or e.g. 130 x 150 mm
cutting range 20° e.g. 150 x 60 mm
or e.g. 90 x 90 mm
Weight approx. 520 kg
Drive power 4,0 kW
- Minimum quantity spray device
- 2 vertical clamps
- Mitre cutting device
used, in good co...
Miter saw with a saw blade diameter of 600mm (optional 800mm)
- manual miter adjustment
- Pneumatic table clamping
- Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable)
- Two-handed safety control
- Automatic miter adjustment
- Roller conveyor with length stop or positioning system
- Design as a sawing machine
- Preload magazine
- Horizontal clamping device
- Suction system
- Other accessories on request
We will be h...
Aluminium circular saw semiautomatic Fabr. KALTENBACH type SKL 350 Masch. # 12513 built in 1965
Cutting capacity 90 °
approximately 135 mm
square 120 mm
flat 70 x 280 mm
square 105 mm
flat 55 x 210 mm
Blade speed 2250/ 4500 m/min
Power 5 / 6 HP
Weight 650 kg
External dimensions approx. 1200 x 1200 x 1500 mm
used, in good condition
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.