saw blade diameter 520 mm
cutting diameter 180 mm
stroke 420 mm
cutting length 420 mm
capacity 90 degrees: flat 500 x 115 mm
cutting range rectangle 400x165300x125240x106 mm
Capacy 45°: rectangle 430x110 350x165 290x175 m/min.
saw band feed 10 - 80 m/min
total power requirement 2,8 kW
weight of the machine ca. 1,25 t
dimensions of the machine ca. 1,52 x 1,52 x 1,56 m
Condition: good, machine ready for operation
Electric 380 Volt
Control panel Siemens
Minimum quantity cooling dev...
Very good machine do aluminium, saw blade 500mm, manual and semi automatic cutting option - profiles are holded by pneuamtics and taken by te both sides after cutting, that saw blade after cut doesnt have any conntact with cutted material.
Manual cutting is by two hands.
It has also option for small size profiles and big size profiles, that saw blade is going upper or lower.
Machine is in very goos condition. You can also buy roller support 4m long and measuring system from emmegi as...
Minimum diameter to be sawn: Ø 8 mm
Residual piece length: 50 mm
Working height: 1065 mm
Saw blade: 500 x 30 x 4.1 mm
Blade speed: 3000 m / min
Blade motor: 4 kW
Weight: 500 kg
EQUIPMENT AND FEATURES:
2x 3m roller tracks, 3m with scale
Ergonomic, easy to use
Pneumatic clamps for attaching the part
Smooth cutting angle adjustment 60 ° to the left and 0 ° to 60 ° to the right.
Micro lubricator for blade
Powerful 4 kW blade motor
Hydraulic circular saw OHLER type KA630
Rotation: from 6,3 to 36 RPM
Blades dimensions: Ø 630 mm
Cutting capacity: Round bars and tubs: Ø 225 mm
Square cutting capacity: 200 mm
Flat cutting capacity: 350 x 170 mm
Cutting length: from 10 mm to 630 mm maxi
Maxi openingclamp/convoyor: 400 mm
Possibility to work in semi-automatic or auto
Auto descent of blade
Voltage: 380 V
Length with feeding: 3500 mm
Width: 2250 mm
Total height: 2200 mm
Weight: Machine: 3,5 T / feeding: 1 T
Diameter saw blade: 660 mm
Mitre device 45
dimensions (length x width x height): approx. 2500 x 1500 mm
Weight: approx. 4 to
1 roller table: 1500 x 8000 mm
1 roller table: 1500 x 3000 mm
The seller is not liable for writing or data transmission errors. The machine is in optics, technique and wear according to the age; used machines are sold without any warranty.
Used quick-cut saw TRENNJAEGER UNITRENN 520 HA with only a few hours of operation. Cutting area: Max. 110 x 110 x 9 mm / 200 x 90 mm single cuts (cutting time 3 - 5/6 - 8 seconds) Max. 70 x 70 mm x 6 mm / 100 x 50 mm series cuts (cutting time 3 - 5/6 - 8 seconds) Proma - saw blades, full steel blade with a diameter of 520 mm and 560 mm with 300 teeth. Cutting speed 3,600 rpm. Height adjustment with cover and protective screen. Manual miter setting with scale. Also available as an option: 1 x Exa...
Hydr. Horizontal - long cut - cold saws Fabr. TRENNJAeGER PMC 6 type
Masch.# 282, built in 1989
Saw blade diameter 460 mm
Cutting height 150 mm
Cutting capacity at 90 ° 650 x 150 mm
Cutting capacity at 45 ° 450 x 150 mm
Working height 850 / 950 mm
External dimensions 2300 x 820 x 1900 mm
Weight 1500 kg
-3 vertical hydr. Clamping cylinders
used, in very good condition
A used well-preserved long cutting cold saws cut-off Hunter
Saw blade diameter 660 mm
Bevel cuts up to 30 ° possible
Section see PDF document.
NC fence exactly STOP 220 measuring length 6000 mm with heavier roller.
Separating hunters - cold saw "PMC 12-N" section: approx. 1.100 mm, blade diameter: 800 mm.
The gray box displayed on the photo on a boom was the control to a foot, this is no longer available
Saw blade Ø: 1310 mm
round 440 mm square 400 mm
flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm
Dimensions 2870+380 x 1320 x 2700 mm (LxBxH)
weight circa 7500 kg
1 used hydraulic cold saw machine
Model: RKT 630
Year of construction: approx. 1979
maximum blade diameter 630 mm
Cutting capacity round 220 mm
flat 550 x 130 mm
Cutting speed about 12 + 24 m / min
Speeds 2 PCs.
Engine power 3 / 5 kW
Dimensions L x W x H 1400 x 1500 x 1900 mm
Weight 1500 kg
• Semi-automatic cold saws:
• The electro-hydraulic control has the following functions: stretch, cut and release
• Vertical vise
• Continuous feed
• 2 speeds
• Very sturdy stee...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.