Behringer HBP 420-723 G
Behringer HBP 420-723 G

Name: Behringer HBP 420-723 G
Brand: Behringer
Availability: InStock

Year of construction

2004

Condition

Used

Location

Germany

Behringer HBP 420-723 G Behringer HBP 420-723 G

Machine data

Machine type:: Behringer HBP 420-723 G

Manufacturer:: Behringer

Model:: HBP 420-723 G

Year of construction:: 2004

Condition:: ready for operation (used)

Operating hours:: 15,800 h

Price & Location

Location:: , Germany

Call

Technical details

Overall weight:: 3,000 kg

Details about the offer

Listing ID:: A20704970

Reference number:: DE-SAW-BEH-2004-00001

Update:: 29.07.2026

Description

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

• Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm
• Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm
• Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm
• Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm
• Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm
• Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm
• Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm
• Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm
• Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm
• Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm
• Smallest cutting length (90°): approx. 90 mm
• Remaining cutting length (manual, 90°): approx. 90 mm
• Cutting speed: 10–120 m/min
• System/belt tensioning pressure: 95 bar
• Connected load: approx. 9 kW
• Voltage: 400 V, 50 Hz
• Control/hydraulic valve voltage: 24 V DC
• Current consumption: approx. 18 A
• Fuse protection: 35 A
• Cable cross-section: min. 4 x 6 mm²
• Material support height: 800 mm

Additional equipment

Ppodpfxsx D N Amj Amysw
• Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010)
• Chip conveyor (0.15 kW motor)

Seller

Registered since: 2017

1,386 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Enschede

18,482 km

Welding manipulator
TTMCWP500

Call

Listing

Welding turn table, high adjustable Protec KT 600 HV

Hergensweiler

18,638 km

Welding turn table, high adjustable
ProtecKT 600 HV

Call

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Ppedpfxsd Anz Ro Amyow Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

See details

Listing

Soest

18,554 km

Profile bending machine
ZopfZB70/2H

Call

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Podpfx Amshgiuhsyjpw Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

See details

Listing

Band Saw - Automatic - Horizontal KASTO HBA 520 AU

Bühl

18,681 km

Band Saw - Automatic - Horizontal
KASTOHBA 520 AU

Call

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant Ppjdpfx Aewm Rm Ijmyew

See details

Listing

CNC milling machine Bridgeport Interact 4

Soerendonk

18,619 km

CNC milling machine
BridgeportInteract 4

€2,000

Fixed price plus VAT

Call

Listing

Kanal

18,423 km

Band saw
MEPShark 332 nc evo

Call

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Pedpfxoul Svls Amyepw Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

See details

Listing

Center Lathe WEISSER-HEILBRONN Junior CNC

Eislingen/Fils

18,583 km

Center Lathe
WEISSER-HEILBRONNJunior CNC

Call

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW Pedpsdmbrxofx Amyepw weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

See details

Listing

Lathe - cycle controled MONFORTS KNC 5 - 1000 / EuroTurn

Dreieich

18,560 km

Lathe - cycle controled
MONFORTSKNC 5 - 1000 / EuroTurn

Call

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm Pedpfx Aowizltomyjpw bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

See details

Listing

Planer-type milling machine - double column HEYLIGENSTAEDT Heynumill 3200-P CNC

Laichingen

18,597 km

Planer-type milling machine - double column
HEYLIGENSTAEDTHeynumill 3200-P CNC

Call

Condition: good (used), Year of construction: 1999, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,050 mm, total length: 13,000 mm, table length: 5,000 mm, table width: 3,000 mm, total width: 8,000 mm, spindle speed (min.): 12,000 rpm, total height: 6,000 mm, table load: 50,000 kg, overall weight: 120,000 kg, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HEYLIGENSTAEDT HEYMUNILL 3200-P heavy-duty portal-type machining center with fixed cross beam, designed for processing large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, table size approximately 5,000 x 3,000 mm, and table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads Ppodpfx Amsy Anrtoysw A and B axes (swivel axes in the milling head) C axis (360° rotation) Simultaneous 5-axis machining possible (with fork milling head) Milling heads: Straight milling head FK 120/340 90° angular milling head WFK 100/750M Fork milling head FK 100/2D Milling head magazine: 5 positions automatic milling head changer Additional equipment: ICS approx. 7 bar 32-position tool changer (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Coolant system Adaptive feed control Heidenhain linear measurement systems X/Y/Z

See details

Listing

CNC SAWING / DRILLING LINE Danobat UT4 104.CPI

Wellingborough

18,722 km

CNC SAWING / DRILLING LINE
DanobatUT4 104.CPI

Call

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Ppsdpfx Amsig T Ameyew Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

See details

Advertise here