Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW Ledpfezcdluox Aiijhh -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Lhsdeuqdxiepfx Aiish Automation roll-off try with leveller

Year of construction: 2006, condition: ready for operation (used), overall weight: 17,000 kg, total width: 2,450 mm, total height: 3,300 mm, pressing force: 306 t, product length (max.): 4,550 mm, number of axes: 3, Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details. • Control system: Cybelec CNC • Drive system: Hydraulic • Main motor power: 22 kW • Working speed: approx. 80–100 mm/s • Rapid approach speed: approx. 100 mm/s • Key features: • Heavy-duty industrial CNC press brake • High-precision Cybelec CNC control system • Robust and rigid steel frame construction Ljdpfx Aezcbypsiiehh • Suitable for large and thick sheet metal bending • Ideal for industrial production and heavy steel fabrication Technical Specification Bending Length 3100 mm

Condition: good (used), JDS hydraulic press Lodpfjiki Ahex Aiiohh Bed: 505 x 510 mm Dimensions: 140x140x285 cm LxWxH

Year of construction: 1992, condition: good (used), H Bret press Lsdpfx Aijiuc Nwsiehh Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min Lhsdpfx Aevuukusiijh power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 450 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation Lsdpfx Aioy Ig Nbeijhh

Condition: used, Year of construction: 1962, pressure 080 t Ledpfxoyq Smis Aiiehh throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm ram adjustment 80 mm power requirement 7,5 kW weight 5,1 t dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Ledpfx Ajyq Sl Seiiohh

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm Lodpfovzxpuex Aiiohh power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm distance between columns 440 mm side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 Ledpfx Asyfwvrjiijhh with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW Lhodpsyfwvlefx Aiish dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm Lhjdpovuk S Uefx Aiioh ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available Lhodpfevuumisx Aiijh

Condition: used, Year of construction: 1980, pressure 50 t distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm ram surface 1700 x 750 mm Lhodpfx Aijvuk Ngsieh power requirement 11,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m with oil-hydraulic drive, controllable dependent on pressure/time and way No foundation pit necessary

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Lhedpfjvuuikex Aiieh Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t Lodevuk I Aepfx Aiiohh oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work stored in partly dismantled condition free loaded to truck

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm Lodpfxsvuuc Rj Aiiohh hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min Lhodpfx Aevzxnweiieh distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Lodpfx Aijzb Du Heiohh Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: good (used), functionality: fully functional, PYE 160 S/1M hydraulic press. Ljdozdlrqepfx Aiiohh

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg Lhedpfszdf Utex Aiioh incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, pressure 100 t stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Ledpoyutqwofx Aiiohh Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 3,915 h, Hydraulic baling press, model JM-125/75, manufactured in 2018. Designed for the pressing and compaction of ferrous scrap and other metallic waste, providing high productivity and optimal density of the resulting bales. The machine is constructed with a high-strength steel structure and equipped with a high-performance hydraulic system, ensuring reliability and durability even under intensive working conditions. Main features: Type: Stationary hydraulic baling press Pressing force: 125 tons High-performance hydraulic system Designed for the processing of scrap and metallic waste Robust construction for continuous industrial use Easy access for maintenance and operation Lhjdpfozdfzyox Aiish This press is an efficient solution for recycling centers, metal recyclers, and facilities dedicated to the management of industrial waste.

Condition: used, total length: 5,200 mm, total width: 2,700 mm, total height: 6,800 mm, overall weight: 110,000 kg, Renovated by Beck & Röhm in 1992,pressing force: 630 t,bolster area: 1730 × 2500 mm,number of T-slots: 8,ram stroke: 900 mm,installation height: 1550 mm,power requirement: 2 × 7.5 kW.Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed. Weight approx.: 110,000 kg Lhodpfx Aijzdfztoioh Dimensions (LxWxH) approx.: 5200 x 2700 x 6800 mm Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No