Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Iajdpsfx Hv Hsfx Aqueu Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, pressure:120 t stroke:400 mm Iaodet Hmldspfx Aqueu table surface area:1750 x 500 mm press capacity:120 t working width:1740 mm total power requirement:3,0 kW weight of the machine ca.:2 t dimensions of the machine ca.:2 x 1,0 x 1,5 m

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW Iaodjcxxmfspfx Aqueu weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, Year of construction: 1989, plate width:150 mm no. of straightening rolls:4 number of draw-in rolls:2 vorne+ 2 hinten roll diameter:60 mm dimensions of the machine ca.:1,8 x 0,7 x 1,4 m all rollers driven and individually adjustable, positioning via digital counter display, with 2 each Isdpfx Aocxxvmequjau introduction roller cages right and left

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw Iodpfx Aqeh Ra N Rjusau weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m

Condition: used, Year of construction: 1993, pressure:160 t throat:360 mm stroke:300 mm table-size:1500 x 700 mm dimension of ram:1200 x 560 mm return capacity:40 t stroke speed:400 m/min stroke speed - under load:16 - 42 Hub/min stroke speed -return:350 mm/min die-cushion pressure:630 kN die cushion stroke:100 mm Ijdpfx Aeh Ra R Iequsau total power requirement:42 kW weight of the machine ca.:19,5 t pressure of ejector:50 kN ejector stroke:50 mm

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm Isdocxxrhspfx Aqusau no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m Iedpfxocxxttj Aqueau tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links Iaedpfxecxxu Nj Aquju stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm Iasdpfxscxxycj Aqueu dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, Year of construction: 1964, pressure:80 kN distance between columns:650 mm table-size:600 x 500 mm stroke:300/400 mm :465 mm dimensions of the machine ca.:2,10 x 1,20 x 1,20 m Iedpfscxxpuox Aqusau

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Iedpfxocxxrde Aqujau Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m Isdpfx Ajcxxwcequjau flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm Isdpfxjcxxxms Aqusau hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm Isdecxxx Hjpfx Aqusau ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 1994, pressure:100 t Ijdpfot Hmk Hsx Aqujau throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min Iodpscxxmkefx Aqujau return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm Iaodpfscxxpcex Aqusu ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, Year of construction: 1995, machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm Iedpfecxxrljx Aqujau feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm Ijdpjcxxrrofx Aquoau hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: used, Year of construction: 1997, pressure:40 t throat:280 mm stroke of slide:8-120 mm no. of strokes:120 Hub/min Iodpfocxxmgsx Aqueau throat:280 mm daylight:350 mm dayligth:270 mm table-size:710 x 565 mm ram surface:500 x 280 mm total power requirement:2,2 kW weight of the machine ca.:3,2 t

Condition: used, Year of construction: 1978, pressure:300 t stroke:88 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 450 mm table height over floor:790 mm Iajdpfx Aot Hmlksquju passage to the back:480 mm ram surface:480 x 470 mm ram adjustment:40 mm power requirement:5,5 kW weight:8,4 t dimensions (WxDxH):2,0 x 1,6 x 3,3 m

Condition: used, Year of construction: 1980, pressure:24 t Iaodpfx Aoufufbequsu table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: excellent (used), Pressure: 10 tons Table size: 500x280 mm Iajdpfx Aqsmnnqkjuju Stroke length: 155 mm

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Iedpfx Aqewin Emouoau Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.