Year of construction: 2018, condition: new, machine/vehicle number: DF0246 Rev0, Tol measurements:2500 x 1800 weight max.:20 t Hedpfx Ahedxvfmjvsfd range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm Hfsdpfx Ahjdxrqxevod No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm Hfjdpfjhlnzksx Ahved transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Hfedpfxek S Htxo Ahvsd Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread Hfedpfx Ahowki Apovsd - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 1992, pressure 100 t table length 1800 mm table width 1550 mm Hedpjyt R H Tefx Ahvjfd table travel 2000 mm dayligth 1800 mm total power requirement 19,5 KVA weight of the machine ca. 22 t

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm Hfedpfxsyt R Epe Ahvod table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1965, pressure 400 t throat 1140 mm stroke 600 mm table surface area 2000x1000 mm Plate 4000x1000x300 mm ram head dimension 2000x1040 mm Cylinder 300 mm Daylight 650 Hfodeyt R Dljpfx Ahvod dimensions of the machine ca. 3,9x4x4,2 m Machine has been overhauled. Maximum distance from ram to clamping plate: 1250 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1985, Manufacturer: RADAELLI Model: 1000/S2 Year: 1985 Condition: Used Stock number: 0388 Press force: 1000 tons Press points: 2 Ram dimensions: 2,820 x 2,200 mm Table size: 3,150 x 2,200 mm Ram stroke: 500 mm Hodpfx Ahoyrigpevofd Die height at BDC: 1,000 mm Ram adjustment: 190 mm Strokes per minute: 15 spm Pneumatic cushion present

Year of construction: 2019, condition: like new (used), functionality: fully functional, Technical Specifications * Machine Type: Cortazar Press * Pressure: 5000 ton/m² * Useful Dimensions: 4700 × 1820 mm * Number of Cylinders: 10 * Plate Type: Pre-drilled stainless steel plates with vacuum system * Press Opening: 300 mm * Cylinder Diameter: 500 / 480 mm * Number of Plates: 2 * First Height: 1370 mm * Last Height: 1570 mm * Total Force: 5000 tons * Filter Belt: Yes Hsdpfx Aoyt Rf Aohvjfd * Integrated Water Tank: Yes * Loading and Unloading System: Automatic * Overall Dimensions: 5355 × 2500 mm * Usage: 546 pressing cycles

Condition: excellent (used), Year of construction: 1999, Manufacturer: Müller Weingarten Press Type: HUQ 630.40 Hsdpfeyt Nqksx Ahvefd Pressing force: 6,300 kN Table area: 4,000 x 1,600 mm Ram area: 4,000 x 1,600 mm Ram stroke: 124-400 mm Ram adjustment: 200 mm Strokes per minute: 10-60 1/min Tool change system: tool change cart Including transfer and ARKU strip feeding line

Condition: used, Year of construction: 2000, gebraucht 2000 Hfedpfeyrhpvsx Ahvsd 070165A prompt, Zwischenverkauf v Italien 27900 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity

Condition: excellent (used), pressure 16 t Hedpfsyrhmhox Ahvofd weight of the machine ca. 16 t

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Hedpfx Ahjyrf Aaovofd Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, TECHNICAL CHARACTERISTICS: Press Model: T130R CE Serial number: 11911 Year of construction: 2004 Nominal force: 1300 kN Nominal stroke: 7.5 mm Adjustable stroke: 16÷200 mm Stop position: TDC Ram adjustment: 100 mm Stop time: 190 ms Strokes per minute min./max.: 10/55 Hsdpev Iktlsfx Ahvefd Maximum mould surface: 600 x 1100 mm Maximum closed mould height: 452 mm Min. closed mould height: 260 mm Upper mould mass: 140 kg Flywheel revolutions per 1°: 411 Max. insertions at 1°: 28 Installed power: KW 11 Voltage: V400 Auxiliary voltage: V24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 10,000 Motorized hammer adjustment Hydraulic overload safety Inverter Complete with user manual and CE conformity and 6 months warranty. • Work surface revived on CNC machine; NEW COMPONENTS INSTALLED: • Safety guards complete with safety keys; • Clutch plates; • Motor; • Motor pulley; • Motor belts; • Clutch pins and brite; • Swivel joint bearings; • Motorized hammer adjustment worm screw bearings; • Flywheel bearings; • Electric panel with touch screen; • Pedal board; • Air pressure gauges; • Hammer overtravel sensor; • Balancer cylinder gaskets.

Condition: new, Year of construction: 2026, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V Hsdpfxjgg Nq Uj Ahvofd

Year of construction: 2025, condition: new, - Panel width 710 mm Hfedpfjh Ramgex Ahvod - Backgauge - Adjustable stroke

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm Hedokw Rbaopfx Ahvefd table surface 1500mm x 1000mm Front light curtain Siemem control Weight 12,5to

Year of construction: 2023, condition: new, Pressing force 150to Siemens PLC hydraulics Bosch/Rexroth stroke 400mm table area 600mm x 800mm Hfsdpfxekyu Hvj Ahvsd

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Hfodpenp Ndhjfx Ahvod Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary

Condition: new, Year of construction: 2024, Double-column press 250t (3000kN) at 245bar Stroke 1000mm Installation height 1200mm Ram plate 1400mm x 1200mm Hfjdpjkw Rbdjfx Ahvjd Table plate 1400mm x 1200mm Rexroth hydraulic system complete Siemens PLC Advance 170mm/sec Pressing phase 8 - 15mm Return stroke 150mm Return speed 110mm/sec Main motor 30kW Sample image

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Ram plate thickness 100mm Table plate 1250 x 700mm Table plate thickness 180mm Motor 15kW Weight 16,000 kg Hfodpfx Ahowir U Esvod For new machines, delivery time approx. 4–5 months.

Condition: as good as new (ex-display), Year of construction: 2025, Workshop press 150to pressing force as straightening press Clear width 2100mm stroke 600mm Installation height 1200 Digital scale Hfedpfx Ajkw N Uxehvod

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Hjdpoyq Tdpsfx Ahvjfd Model: S4-800 Year: 2001 Condition: Used Stock number: 0392 Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm.

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Hfsdoyq Tdispfx Ahvsd Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Strokes per minute: 8-24