Used panel saws with a cutting length from 3000 to 3999mm for sale (49)

Condition: good (used), Code: 0301 Brand: PAOLONI Model: P45 - CE Standard Panel saw with tilting blade and scoring unit for panels, furniture, custom-made furnishings, doors, wooden window frames, composite materials, plastics, and various materials - CE Standard Technical data: Aluminum sliding carriage length 3200 mm Carriage lock in any position Cutting width on parallel guide 1250 mm Max blade diameter 450 mm Hole 30 Cutting height at 90° mm 157 Cutting height at 45° mm 111 Tilting blade unit 0-45° Saw shaft speed rpm 3000/3600/4200 Blade motor power 7,5 Hp Automatic saw unit lift Manual tilt with saw unit handwheel Scoring saw unit: Blade diameter mm 125 - Hole 30 - Scoring motor power Hp 1 - Horizontal and vertical scoring saw adjustment Parallelogram blade guard Eccentric clamping arm Hfjdpeyk Hzhefx Agfjf Saw blade tilt indicator Weight kg 820

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Hjdjy A Svpjpfx Agfjff Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 7,5 Kw Main rotation speed 3900 rpm Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: ready for operation (used), Year of construction: 2000, cutting length (max.): 3,300 mm, This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. • Cutting length: 3300 mm • Saw blade overhang: 125 mm Hodpfx Ajx D Hlfsgfeff • Main saw motor: 18 kW • Scoring saw motor: 2.2 kW • Control: CADMATIC Additional equipment • 3 air-cushion tables • Lifting table, 3300 x 2200 mm

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Transport available at extra cost! Hfodoyzxkwjpfx Agfef

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Hfodpfx Agsyf Nu Tofjf

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Hfjdpfxjyzzguj Agfef Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Hjdpfsiz A Amox Agfjff Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Hedovvkqgjpfx Agfsff Storage location: Nattheim

Condition: excellent (used), Cutting dimensions: 3300x3300 mm Cutting height: 55 mm 3 air tables Length of air tables: 2.6 m 9 grippers Maximum saw blade diameter: 300 mm Maximum scoring blade diameter: 160 mm Saw carriage feed speed: 0–60 m/min Pusher beam feed speed: 0–60 m/min Main saw motor power: 9 kW Hfjdeyyzl Iepfx Agfsf Scoring saw motor power: 1.3 kW Year of manufacture: 2018

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program Hfodpfshvan Iox Agfof no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1998, still well-preserved panel saw max. cutting length 3200 mm Hodpfjx Sdrhex Agfoff Price – as is, not dismantled, ex location Austria, Linz area However, it must be dismantled and collected within 1-2 weeks.

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Hsdpfxjyxqigo Agfjff Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Hodpfxsx Twcvo Agfjff

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, Hjdpfoyu N Rgsx Agfjff scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. Hfjdsyfg Rlepfx Agfsf If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: used, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm CUTCONTROL 2 control system, 17" TFT touchscreen Powerful optimization software: CD CUTTING-SYSTEM Label printer Hedpfx Asytrvijgfeff 3 air-cushion tables 1800 x 600 mm Automatic angle pressing device, up to max. 1300 mm Automatic notch-cutting device Offcut management device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0–100 m/min, stepless Saw carriage return: 130 m/min Rip fence feed: 0–100 m/min (EU 0–25 m/min) Rip fence return feed: 100 m/min Rip fence clamps: 7 units Compressed air supply required: 6 bar Extraction connection on main machine: 1 x 120 mm Extraction connection on pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air flow velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Ex site

Condition: used, Holzma HPP 250r panel saw, Scorer 1.1 kW, Cutting length 3800 mm, Cutting width 3800 mm, Hfedoyvgnmjpfx Agfjf Clamps: 6 pcs, Max saw blade diameter: 350 mm, Holzma Cadmatic control system, CE mark.

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Hfodpfx Agsyrqrtefsf Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Hsdsyufixepfx Agfoff Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: excellent (used), Year of construction: 2022, operating hours: 105 h, Sliding table panel saw with a movable carriage and saw blade tiltable up to 46°, designed for safe operation and requiring 50% less space compared to a conventional sliding table saw and beam saw combined. Simple and fast programmed adjustments via the "Ready" control from the operator panel. Immediate positioning is ensured by a motorized and programmable rear fence, providing fast and precise workpiece alignment. Robust and reliable telescopic fence with scale and two flip stops: Panel cutting up to 2500x3200 mm (optionally 3200x3200 mm). The large fixed table ensures optimal support of the panel during processing. Technical data Class: px 350i Max. sliding carriage travel [mm]: 2600 / 3200 / 3800 Saw blade tilting range [°]: 0÷46 Max. saw blade diameter (cutting) [mm]: 350 Max. saw blade diameter (milling + cutting) [mm]: 300 Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 Saw blade rotation speed [rpm]: 4000 Cutting width at rear fence [mm]: 1300 Other technical features: Hsdpfjyb T Trsx Agfoff Three-phase motor: 7 kW, 50 Hz Extraction hood diameter [mm]: 120 (1) - 100 (2) Dimensions [mm]: L 3859, H 1368 Location: ex works customer - Available at short notice -

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 3,200 mm, total length: 6,667 mm, total width: 5,916 mm, overall weight: 5,000 kg, Equipment: CE marking, scorer, We offer a horizontal panel dividing saw Selco EB90 Machine data Brand: Selco Model: EB90 Description: Horizontal panel saw Cutting length: 3,200 mm Maximum panel width: 3,200 mm Saw blade projection: 85 mm Clamping grippers: 6 Connection: 15kW, 3Ph, 50 Hz, 380V AC Weight approx.: 5,000 kg Hodpfxjyrngzs Agfoff Year: 1999 3 rounded air cushion tables as support Software: Optiplanning Brochure can be provided upon request The machine is in impeccable condition (still in operation). Video can be provided upon request. Machine as seen, without dismantling and freight.

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0-341-07-8874, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 350 mm, total length: 5,800 mm, total width: 6,410 mm, total height: 2,000 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 72 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, main saw diameter: 350 mm, Equipment: scorer, Panel beam saw HOLZMA type HPP 32/32/L Hedpfxex Sap Ns Agfeff Left side execution machine Main motor 7,5 kW Pre-cutting unit, motor 1,1 kW Central side pressure device with infinitely adjustable side pressure 3 "air" tables: size 1800x600 mm 6 pcs of grippers: 3 pcs double finger stop; 3 pcs single finger stops Label printer Software for cut plan optimalization Software for CSV import

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 Hfsdpfx Agewfdiyjfof - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Hfedpfxsyngt So Agfef Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, 3200mm carriage Hfjdpfx Ajyf Eptogfjf Tiltable blade with hydraulic rise and fall Cutter 380V Sold as is without inspection