Used Press Unit for sale (39,383)

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Speed: 44.000 c/h Hodpfehncafsx Ahvefd

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Hsdpsdz Sqqsfx Ahvofd Installation height: 32 mm - Built-in clinching tool - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Comes from a production plant, sold without electrical control

Condition: used, Spreader and pressing device with WEBER hydraulic unit Type E45 / 59600.0 Hfjdpjdzp S Rsfx Ahvsd High-pressure unit + hydraulic spreading tongs, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit Type E45 / 59600.0 Max. operating pressure: 630 bar Delivery rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device – tongs WEBER Type SP30 / 59 198.0 Reach = arm length: 340 mm Spreading distance max.: 610 mm Spreading force in working range max.: 132 kN Closing force: 99 kN - Double hose with quick coupling Nominal power: 0.9 kW Power connection: 220 Volts, 50 Hz Weight hydraulic unit: approx. 40 kg Weight spreader device: approx. 25 kg Very good condition Hydraulic fire brigade rescue set with hydraulic power unit and spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctionally designed spreader jaws made of drop-forged and hardened steel.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 03.010.00, clearance between the columns: 1,620 mm, table width: 1,600 mm, table length: 1,800 mm, ram plate width: 1,600 mm, ram plate length: 1,800 mm, overall weight: 22,000 kg, stroke length: 1,800 mm, pressing force: 200 t, Try-Out Press with Injection Unit – Manufacturer: Reis – from Automotive Production For sale is a try-out press with integrated injection unit from Reis. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been carried out regularly. The system is currently under power and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in excellent technical condition and has been well maintained. It is particularly suitable for precise spotting and adjustment work in tool and mould making. Viewing is possible at any time by appointment. Dismantling and loading are the responsibility of the buyer. On request, we can provide dismantling, loading and transport arrangements at additional cost. Below are the technical specifications of the offered machine: ##### Technical Data + Information: TUS 160 OK – 200 ####General Information - Designation: Try-Out Press with Injection Unit TUS 160 OK - 200 - Type: Vertical / Column Type - Manufacturer: REIS - Serial No.: 03.010.00 - Year of manufacture: 1981 - Total weight: 22 t ####Press Force - Press force (Ram): 200 t - Press force (Ejector): 30 t - Operating pressure: 200 bar - Accumulator: No. 05015 ####Machine Body - Design: 4-column / sheet frame - Hydraulic cylinder: 1 - Diameter: Ø 360 mm - Arrangement: vertical, top mounted ####Table - Table size: 1800 x 1600 mm ####Clamping Table T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ram Maximum stroke: 1800 mm Retraction force: 70 t ####T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ejector - Ejector stroke: 190 mm (over clamping plate) Hedoyluivspfx Ahvjfd ####Pump - Power requirement: 22 kW - Flow rate: 122 l/min - Speed: 1450 rpm (Try-Out Press, Spotting Press, Test Injection Press, Hydraulic Press, Hydraulic Press Machine) ##### Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety standards as they fully comply with Brazilian national safety directive NR 12, which builds on these. Our core strength is custom machine building and press automation. We offer bespoke hydraulic presses, press brakes and guillotine shears at surprisingly competitive prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: used, machine/vehicle number: 15091, Buchdruck Nummerierwerke für Tiegel - Letter Press Numbering units for Tiegel - Cylinder Sünüm - Leibinger Numbering UnitsLetter Press Numbering units for Tiegel - Cylinder Hedpfx Aorffnmehvofd Div. Zubehör + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! Hodpohtyxljfx Ahvsfd International shipping costs on request!

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Hedoltrmuspfx Ahvjfd Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: good (used), TABLE PRESS WITH POWER UNIT Hsdpfok Adfnex Ahvsfd

Condition: used, machine/vehicle number: 231500079, -WT 108- Offered here is a table drilling machine and special drilling unit. Hedpfelf Ezwjx Ahvefd Bench drill: - 5 speeds via pulley - throat / stroke: 10cm special drilling unit: - pneumatic clamping device - automatic feed

Condition: used, In this offer you purchase a used accessory ‘Canon Document Insertion Unit N1’ Object of sale: Hodpfx Ahot Rfh Ejvjfd 1 x Canon Document Insertion Unit N1 for various Canon models Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), APV Cheese PrePress Type OPD 11,5 in very good condition, capacity 18.000 L. 1 piece with curd distributor. Hedpsdctzlofx Ahvofd Complete line with all support equipment but without lifting parts!.

Year of construction: 2016, condition: used, · V-belt driven, two-stage, compressing 2-cylinder piston compressor · 15-year warranty on the tank against rust-through, thanks to internal coating · Equipped with rubber vibration dampers for secure positioning · With intercooler and aftercooler · Easily accessible condensate drain valve · Air outlet 3/4" Common features · Suitable for expanding existing compressed air systems · Flexible expansion possible by simply retrofitting a soundproofing hood (for compressors with 4 kW) Technical data Pressure: 10 bar Intake capacity: 1000 l/min Hfodpfx Aoyfp Ruohvjd Effective delivery rate: 790 l/min Drive power: 5.5 kW Speed: 995 rpm Tank volume: 10 l Weight: 158 kg Noise level: 82 dB[A] Air outlet: 3/4" internal thread Dimensions (W x D x H): 1005 x 650 x 770 mm Incl. tank Common features · Vertical tanks · Simple and cost-efficient tank inspection via handhole or corresponding inspection openings possible · 15-year warranty on the tank against rust-through, thanks to internal coating Technical data Pressure: 11 bar Tank volume: 500 l Weight: 130 kg Air outlet: G 1 Dimensions (W x D x H): 850 x 830 x 2030 mm Incl. Schneider DK 1500 Eco refrigerated dryer Location: Supplier

Condition: good (used), Year of construction: 2014, Offer 26042 - Operating hours: 49,500 h - Operating pressure: 11 bar Hedpfsyrfzpsx Ahvjfd - Delivery rate: 680 l/min - Drive: 400 V / 5.5 kW - Motor speed: 2,950 rpm - Air receiver: 200 L - Required space: approx. W 600 x H 1,600 x D 1,000 mm - Weight: approx. 250 kg

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling Hfsdsquzfcepfx Ahvjd - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Hfsdpfxjhalvdo Ahved Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 600 bar Delivery rate: 66 l/min. Drive speed: 1500 rpm. Driving power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x1.000x1.300 mm weight: approx. 1.300 kg Year of manufacture: 2008 Condition: In very good used condition. Hedjh Uc Iuspfx Ahvsfd

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Delivery rate: 56 l/min. Drive speed: 1.475 RPM Hsdpefl Dwmofx Ahvefd Drive power: 44 kW with SIEMENS 45 kW 3~motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm weight: approx. 1.115kg Year of construction: 1995 Condition: in good used condition.

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 Hjdpfxjv Hqpqj Ahvofd URACA 3-plunger pump KD606 Flow rate: 138 l/min with 30 kW electric motor

Condition: good (used), L-2017-APV-Prepress 10.000 L Hsdpfx Ahsdnkvdsvofd APV Cheese PrePress Type OPD 5,5 OCD in very good condition, capacity 10.000 L. Complete line still i function! APV Cheese Prepress unit with curd distributor. Year: Denmark 2000.

Condition: used, Control unit for overpressure encapsulation system Hfedpjdahcujfx Ahvsd -Number: 1x available -Price: per piece -Dimensions: 270/160/H90 mm -Weight: 1.4 kg

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available Hjdpfx Asu Nkk Rohvjfd 13 pcs available i.D. *

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Hsdpfx Ajyacaxshvjfd Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW Hedpjyablmsfx Ahvefd with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N Hodpfsk Sgwaox Ahvefd 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. Hfedpfxox E Utie Ahvod High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.