Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 Itodpsytcd Rjfx Ahvsd EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new 1) Amada TP45FX Iodpfjyunphex Ahvstd 2) PATEC 110ton press with recoiler

Condition: good (used), Year of construction: 1978, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERL135B -Pressure capacity: 135 tons -Coupling: pneumatic -Drive: 11 kW -Stroke: adjustable 20 - 120 mm -Table size: 670 x 1050 mm -Table cutout: 200 x 325 mm -Projection: 360 mm -Punch holder: Ø 50 mm -Insertion height 445 mm Ijdpfx Aheyvuq Nsvotd -Dimensions: 2530/1200/H2410 mm -Weight: 8008 kg

Condition: used, Year of construction: 1963, total height: 2,880 mm, total width: 1,500 mm, total length: 2,300 mm, Empty weight: 8.000 kg Price: On request - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg Itedpfx Aowmfrrjhved - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, total height: 2,750 mm, total width: 1,700 mm, total length: 1,600 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No Itedpfjx Dkfpsx Ahved - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 3,350 mm, total width: 1,600 mm, total length: 2,650 mm, Empty weight: 9.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: CNC - Press force [ton]: 70 - Min. stroke [mm]: 10 - Max. stroke [mm]: 90 - Table length [mm]: 650 - Table width [mm]: 495 Iodpfx Ahsxry Szevjtd - Ram width [mm]: 400 - Transport dimensions: 2650mm x 1600mm x 3350mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 Iodpfx Ahoxywkqsvstd - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 2,700 mm, total width: 2,550 mm, total length: 1,350 mm, Empty weight: 7.000 kg Itsdjx Ad Hkopfx Ahvsd - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Iedpow N Su Djfx Ahvetd Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 Itedpfx Aox N Sxdshvjd - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ijdjw N St Hopfx Ahvjtd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Iedpfx Ahox U Eiasvjtd Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Ijdsv Rwu Uopfx Ahvjtd Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Ijdpeyvkukjfx Ahvstd Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Iodpfx Ahjwuutbevjtd

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., Itedpfx Ahjxabcwovod but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder Itodpfxjxaabfs Ahvjd - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l Itedjyfwvlepfx Ahvjd power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Side window 1150 mm feed down 500 mm/s Itjdpfjv Svbvex Ahvsd feed up 550 mm/s working feed 38 mm/s oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t dimensions (WxDxH) 4,4 x 3,3 x 5,5 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm Isdsvuk Nmopfx Ahvstd stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm dimensions (WxDxH) 1,9 x 1,3 x 2,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition

Year of construction: 2003, condition: ready for operation (used), overall weight: 16,300 kg, total width: 3,110 mm, total height: 1,855 mm, pressing force: 23 t, product length (max.): 3,735 mm, stroke length: 275 mm, Hydraulic press manufactured in 2003. This Darley EHP-LS 230.31/25 features a press force of 230 tons and a maximum bending length of 3100 mm. It includes a throat depth of 400 mm and a stroke of 275 mm. The machine is equipped with CNC control and independent hydraulic axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Darley EHP-LS 230.31/25 hydraulic press we have for sale. Contact us for further details. • Technical specifications • Max hydraulic pressure: 250–300 bar • Distance between columns: 2550 mm • Throat depth: 400 mm • Table width: 170 mm • Table height: 900 mm • Max opening: 500 mm • Rapid approach speed: 120 / 140 mm/s • Working speed: 10 mm/s • Oil tank capacity: 200 L Itjdpfx Ahjyuya Sjved • Main drive power: 24.5 kW • Max power consumption: approx. 27–32 kW • Noise level: 72–78 dB(A) • Backgauge • X-axis range: 0–800 mm • Z-axis range: 80–2150 mm • R-axis height adjustment: 190 mm • Accuracy: ±0.05 mm (X/Z), 0.1 mm (R) • Positioning speed: • X axis: up to 400 mm/s • Z axis: up to 250 mm/s • R axis: up to 100 mm/s • Number of backgauge fingers: 2 (expandable) • Axes configuration: 6 axes (X1, X2, Z1, Z2, R1, R2) • Equipment / Features • CNC control (commonly Delem DA series) • CNC crowning (table compensation) • Independent Y1/Y2 hydraulic axes • Backgauge with X, R, Z axes • WILA hydraulic upper clamping • Pneumatic lower clamping • Optional front laser safety system Technical Specification Bending Length 3100 mm

Condition: used, This horizontal bender is being auctioned in our industrial/machinery auction for educational institutions – Making Room for New Equipment! (No VAT statement), online. Itjdpfxeyuvwyj Ahvsd

Condition: new, Year of construction: 2024, neu 2024 7296 prompt, Zwischenverkauf v Türkei 70300 € 1328.67 € 1 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations Itodpewiqq Sjfx Ahvsd (sample photos) OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600 Ijdsuifr Hjpfx Ahvjtd

Condition: used, pressing force: 100 t, input voltage: 380 V, Hydraulic press Brand: Francisco CAMP Force: 100 tons Maximum piston stroke: 150 mm Motor: 2 HP Power: Three-phase 380V Iodjx Syc Nspfx Ahvetd Operation by pedal/control panel Table dimensions: 780 x 330 mm Clear press width: 780 mm Clear height from table to piston base: 400 mm