Eccentric presses WMW 100t

WMW 100t

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm Lodpsu Icmhofx Af Ssrt profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Lodpfx Aou D Dhxof Ssrt Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Ljdpfx Aferm Nqmo Ssrt Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm Lredofn Aqnepfx Af Set ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Lrjdjv Ip Sgepfx Af Sst

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm Lsdpfxst Eix Ro Af Sjrt ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm Lrodpotu Hvwofx Af Sst incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting Lodpfstqm Dmsx Af Sjrt - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 1987, total length: 7,100 mm, total width: 1,300 mm, total height: 1,300 mm, Colour: Green Empty weight: 4.000 kg Price: On request - Year: 1987 - Documentation available: No Lrjdpfx Afszrhtyj Sst - CE certificate present: No - Serial number: 301/405 - Drive system: Conventional - Drive system: Hydraulic - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6020 - Max. opening [mm]: 150 - Max. bending angle [°]: 135 - Options: Long folding machine - Transport dimensions: 7100mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm Lredpfx Aocxxw Uof Sst cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW weight of the machine ca.:1,2 t