Used Galion 118 for sale (402)

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. Csdsud Ryropfx Abbjgn - Capacity 16m3/H

Condition: excellent (used), machine/vehicle number: 98350530, Year of construction: 2019, operating hours: 6,661 h, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,000 mm, Lifting capacity: 1.800 kg Technical condition: very good Visual appearance: very good Please contact PEDRO GÓMEZ for more information Codpfxjyc D Euo Abbsgn

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction Cgedpfxji Rixrs Abbjn 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: new, machine/vehicle number: e763c8c2bb3370bd2342236a4, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Steel underride guard Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Factory silver steel rims Cgedpei Rizbofx Abbsn Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir without ABS, but with mechanical ALB, then max. 60 km/h approval 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, electrics 12 volt, multi-chamber lights, without amber LED lighting at the sides, reflectors at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 7-pin 12 volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-sided tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion, for max. 60 km/h approval, towing vehicle LoF, (max. 40 km/h possible in Switzerland) Prepared for single-line license plate holder without contour marking / reflective strips according to ECE R 048, Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Please note! If the bridge is galvanized, it will not be painted! Note! Bridge only primed inside! Wide tires also possible for an extra charge. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive pictures!

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides Cgjdpfx Asi Ri Ilsbbjn 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: bdf30cb8a53c70e900bdb40a7, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: -, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Cgsdpfxsi Riwio Abbjn Steel underride guard Rear splash guards across the entire width Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Rear support, access ramps, storage box are optionally available at extra cost Attention: Archive pictures

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Cgsdpfx Asi Ri H Dsbbon Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,187 h, load capacity: 1,800 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,150 mm, empty load weight: 334 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and get individual advice—we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: Low lift pallet truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2014 Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Length: 1,800 mm Width: 800 mm Height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load center: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg Cgodpsxnk D Hefx Abbon

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm -Inside: Ø: 80 mm -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg Codpfx Asvy Umtsbbsgn

Condition: good (used), Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: SEW-Eurodrive, geared motor with brake Cgjdeik Adcepfx Abbsn -Type: RF07 DR63M4/BR -Speed: 118 rpm -Power: 0.18 kW -Hollow shaft: Ø 35 x 180 mm -Protection rating: IP54 -Brake: 3.2 Nm -Dimensions: 395/118/H165 mm -Weight: 8.4 kg

Year of construction: 2007, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 Csdpfx Aoiz Dtvebbjgn -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 250 mm -Drum: Ø 118 mm Cgsdjvxp Ddspfx Abben -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 310 mm -Weight: 9.7 kg/piece

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm Cedechbv Hspfx Abbegn -Weight: 31 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece Codpfsvxp Hxox Abbogn -Dimensions: Ø 118 x 385 mm -Weight: 11.3 kg/piece

Condition: good (used), Year of construction: 2007, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from electric pallet truck ECE 118 -Drive motor: 24 VDC / 1.6 kW -Individual components: see photos -Number: 4x drawbars available Cgjdpfx Abjiz Dr Aobsn -Sale/Price: per piece -Dimensions: 1530/480/H290 mm -Weight: 87 kg/unit

Condition: used, Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg Cgodoc R R Anopfx Abbon

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm Cgodpfx Aboffukrsbsn -Weight: 684 kg

Condition: used, machine/vehicle number: 16717, Year of construction: 2016, lifting height: 2,995 mm, enginetype: Electric, manufacturer: Crown Csdpfox Rr E Tjx Abbsgn

Condition: good (used), Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm Cedpfx Abob S Hr Djbogn -Weight: 12 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10025049, Year of construction: 2016, operating hours: 1,173 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, construction height: 1,400 mm, battery voltage: 24 V, empty load weight: 640 kg, Crown WAV60-118 Vertical Order Picker, year of manufacture 2016 Details: Crown WAV60-118 Year of manufacture: 2016 Recorded operating hours (h): 1173 Lift height (mm): 2997 Overall height (mm): 1400 Load capacity (kg): 135 Own weight (kg): 640 Front tires: Polyurethane Rear tires: Polyurethane Battery capacity (Ah): 220 Battery voltage (V): 24 Accessories: Integrated charger. Remarks: Operator platform height: 2997 mm. Reach height: 5000 mm. Length: 1525 mm. Width: 750 mm. Height: 1400 mm. Platform load capacity: 135 kg. Codpfx Asxdak Ijbbjgn Upper load area: 90 kg. Lower load area: 115 kg.

Condition: used, 🧰 Product features Cgodpfox Exnqjx Abbsn • Condition: used, see photos • Colour: galvanized • External dimensions: 1181 x 1093 x 40 mm • Internal clearance: 1116 mm • Load capacity: 500 kg / m² • Weight: 14.7 kg • Mesh size: 43 x 65 mm 💰 Price €32,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible anytime by prior arrangement Constantly over 5,000 linear metres of pallet racks from various manufacturers in stock (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90556754, Year of construction: 2018, operating hours: 872 h, load capacity: 1,800 kg, lifting height: 1,660 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,310 mm, battery capacity: 110 Ah, battery voltage: 24 V, fork length: 1,190 mm, empty load weight: 807 kg, Jungheinrich EJD 118 Pallet stacker, year of manufacture 2018 with a Standard mast & Li-Ion battery Details: Jungheinrich EJD 118 Year of manufacture: 2018 Work hours (h): 872 Mast type: Standard Lift height (mm): 1660 Cjdpfx Asxyinzsbbjgn Freelift (mm): 0 Build height (mm): 1310 Initial lift: Yes Lift capacity (kg): 1000 / 1800 Fork length (mm): 1190 Weight (kg): 807 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2018 Battery capacity (Ah): 110 Battery voltage (V): 24

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90556755, Year of construction: 2018, operating hours: 357 h, load capacity: 1,800 kg, lifting height: 1,660 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,310 mm, battery capacity: 110 Ah, battery voltage: 24 V, fork length: 1,190 mm, empty load weight: 801 kg, Jungheinrich EJD 118 Pallet stacker, year of manufacture 2018 with a Standard mast & Li-Ion battery Details: Jungheinrich EJD 118 Year of manufacture: 2018 Work hours (h): 357 Mast type: Standard Lift height (mm): 1660 Freelift (mm): 0 Build height (mm): 1310 Initial lift: Yes Lift capacity (kg): 1000 / 1800 Fork length (mm): 1190 Weight (kg): 801 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2020 Cgodpoxyikcsfx Abbjn Battery capacity (Ah): 110 Battery voltage (V): 24

Condition: used, machine/vehicle number: 11209, Year of construction: 2010, operating hours: 3,850 h, load capacity: 1,800 kg, load center: 600 mm, construction height: 1,300 mm, fork length: 1,150 mm, overall weight: 546 kg, enginetype: Electric, manufacturer: Jungheinrich Cgsdpfx Ajxubfujbbon

Condition: used, machine/vehicle number: 14967, Year of construction: 2008, operating hours: 1,664 h, load capacity: 1,800 kg, lifting height: 200 mm, load center: 600 mm, construction height: 1,350 mm, fork length: 2,400 mm, overall weight: 210 kg, enginetype: Electric, manufacturer: Jungheinrich Cgodpfx Absxqkr Njbsn