Condition: good (used), INVER-PRESS Tar/S90 Eccentric Press Isdpfx Aeyvi Ivshvetd

Condition: used, For sale: Vaccari Press 330T. The machine is currently not in operation. Ideal for refurbishment or spare parts. For more information or if interested, feel free to send a message. Itedpfeyvia Sex Ahved

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t Ijdpfx Ahjfxyh Rjvotd distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Itodpfx Ahjk S Dt Tjvsd Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 1971, operating hours: 24,808 h, functionality: limited functionality, total height: 1,915 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 1,150 kg, DGUV certified until: 07/2026, pressing force: 35 t, power: 1.47 kW (2.00 HP), Tool monitoring: CamCon DC50/51 Nominal force: 350 kN Stroke rate: max 110 Feed: mechanical Adjustable stroke: 8-100 mm Main drive // kW: 1.1 kW Power connection: 2.85A/380V 50 Hz Adjustable stroke: 8 - 100 mm Table size: 400x380 mm Itsdpoyvfcbefx Ahvod Max. strip width: 20 mm Max. material thickness: 1 mm Machine dimensions: 1030 x 790 x 1915 mm Weight: 1150 kg "Main drive on (actual operating hours)": 24,808 hrs

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Isdpfsyu T Ucjx Ahvetd Ram adjustment: 80 mm Motor power: 30 HP

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Itedpeyu T Dqofx Ahved

Year of construction: 1978, condition: ready for operation (used), Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible. Itjdpfxsyu T Dwe Ahvjd

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg Isdou Haqhepfx Ahvotd

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms Itodou E U Nispfx Ahvjd machine weight: 8160 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Iodpfx Aheu Dw U Sovotd Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, table height: 360 mm, table width: 810 mm, pressing force: 45 t, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Ijdpfx Ahou Dkc Aovetd Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm

Condition: used, Year of construction: 1985, operating hours: 35,288 h, machine/vehicle number: 10661, total height: 2,200 mm, total width: 1,200 mm, total length: 1,700 mm, pressing force: 25 t, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a MABU 25 VP /RC, which, given its age, is in good condition. The machine is still in use in serial production and operates reliably. An inspection and test run are possible in ongoing production until the end of week 18/2026. This gives you the opportunity to personally verify the machine’s performance and functionality. Nominal force: 250 kN Stroke rate: 12⅓–500 spm Feed: MABU 120/150 Adjustable stroke: 7–62 mm Main drive: 3.7 kW Power supply: – Adjustable stroke: 7–62 mm Table dimensions: 400 x 360 mm Adjustable strip entry height: 10–140 mm Max. strip width: 35 mm Max. material thickness: 1.5 mm Machine dimensions: 2115 x 1662 x 1190 mm Weight: 2500 kg "Main drive on (runtime) (Control cabinet counter)" 35,288 h A sound enclosure is optionally available for purchase. Itodpoyu S Etofx Ahvsd

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50, a high-performance punching machine designed for precise and reliable results in series production. The machine is currently still integrated in an ongoing production process, and can therefore be inspected and tested under real operating conditions. Viewing and thorough functional testing are possible until the end of calendar week 20/2026. Thanks to continued use, the machine is in technically flawless and immediately operational condition. All maintenance and servicing work has been carried out regularly and meticulously. Technical specifications: Nominal force: 500 kN Stroke rate: 100-1120 spm Feed: BBV 202/120 Adjustable stroke: 16 - 51 mm Isdpfx Aheyu Sn Iovotd Installation space / clamping plate: 760-940 mm Main drive power: 22 kW Power supply: 400 V / 50 Hz Adjustable stroke: 16-51 mm Ram surface: 980 x 420 mm Table surface: 940 x 580 mm Adjustable strip inlet height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual run time): 42,416 hours Optionally, a soundproof cabin is available for purchase.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H – a proven and powerful high-precision stamping press designed for maximum reliability and accuracy in series production. The machine is currently still in operation and can therefore be inspected and tested under real production conditions. Acceptance and trial runs are possible until calendar week 17/2026. Itjdpfx Ajyu Nipshvjd Due to its ongoing use in production, the system is in technically flawless and fully operational condition. Regular maintenance and servicing have been carried out. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Field of application: High-precision stamping for series production Condition: Technically flawless, ready for immediate use Availability: By arrangement / from CW 17/2026 A soundproof cabin is optionally available. Technical details: Nominal force: 800 kN Stroke rate: 100–1000 spm Feed unit: BBV 320/200 Adjustable stroke: 16 – 63 mm Die area / Bolster plate: 970 mm Main drive / Power: 43 kW Power supply: 380 V / 50 Hz Ram surface: 760 x 510 mm Table surface: 950 x 910 mm Adjustable strip entry height: 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15,550 kg

Condition: used, Year of construction: 2004, total height: 2,620 mm, total width: 1,450 mm, total length: 2,650 mm, Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 180253 - Drive system: Conventional - Press model: Workshop press Itedpfxsytghtj Ahved - Press configuration: Single-acting - Press force [ton]: 150 - Max. stroke [mm]: 340 - Table width [mm]: 1570 - Ram length [mm]: 280 - Ram width [mm]: 200 - Height adjustment [mm]: 800 - Pressing speed [mm/s]: 5 - Column spacing width [mm]: 1570 - Transport dimensions: 2650mm x 1450mm x 2625mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2016, condition: good (used), 1.00 - GENERAL MACHINE DATA · Machine type: APC 1500 TON Isdpfsytc Shex Ahvjtd · Closing direction: Downstroke · Max. operating pressure (primary circuit): 220 BAR · Clamping force: 1500 TON · Weight: approx. 42,000 kg · Dimensions (W x D x H): 2500 mm x 2500 mm x 5500 mm 1.01 - HYDRAULICS & CYLINDERS · Number of clamping pistons: 1 · Clamping piston diameter: 930 mm · Clamping piston stroke: 700 mm · Number of rapid traverse/return cylinders: 2 (oil-hydraulic) · Force of rapid traverse cylinders: 20 TON (each) · Rapid traverse cylinder (bore): 120 x 50 mm · Guide columns: Steel C45, hard-chromed (0.15 mm), Ø 200 mm · Guide length: 600 mm 1.02 - DIE HANDLING TROLLEY (TRANSFER CART) · Transfer cart dimensions: 900 mm x 1900 mm · Transfer cart stroke: 1500 mm · Number of cart cylinders: 2 · Cart cylinder bore: Ø 70 x 40 mm (stroke 1400 mm) · Loading and unloading side: Front 1.03 - WORK AREA & TOOLING · Number of working levels: 2 · Number of usable spaces: 1 · Clear distance between levels: 800 mm · Ejector travel area: 650 mm x 600 mm · Minimum tool height: 100 mm 1.04 - ELECTRICAL DATA & CONTROL · Control system: Programmable Logic Controller (PLC) · Motor voltage: 380 V / 50 Hz · Control voltage: 24 V DC · Installed power (main motor): 37.5 kW · Frequency converter: Yes (for low-noise operation and energy savings) · Vertical travel measurement: Linear transducer · Cart travel measurement: Encoder with absolute zero point · Pressure monitoring: Electronic pressure transmitter 1.05 - SAFETY FEATURES · Fall protection: Progressively acting mechanical safety device (effective in any position) · Safety zones: Light curtains (Category 4) at loading and unloading sides · Side guards: Fixed frames with interlocked safety doors (safety switches) · Standards: Complies with CE guidelines 1.06 - CONSTRUCTION & MATERIALS · Frame: Electrically welded steel (ribbed) · Bearing bushes: Bronze bushings · Hydraulic components: CETOP standard (e.g. ATOS) · Pneumatic components: UNI-CETOP standard

Condition: good (used), Year of construction: 1980, In good technical condition. Itedpfeytb Dpjx Ahvjd Year of manufacture: 1980

Condition: good (used), Used hose crimping machine from Finn Power Lillbackan Konepaja Type: P 32 RAE Including various dies up to 52 mm diameter Capacity up to 78 mm (excluding dies) Itsdpoytb D Aofx Ahvod

Condition: new, Year of construction: 2019, machine/vehicle number: DF0319, pressing force: 125 t, pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6 t dimensions:2540 x 933 x 3000 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm table height over floor:850 mm Itjdpfsfxykpox Ahvod Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l speed rapid traverse:10 mm/sec column diameter:120 mm

Condition: as good as new (ex-display), Year of construction: 2018, pressing force: 110 t, pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm Iodpfxofhcc To Ahvotd table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0325, pressing force: 40 t, pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Itjdpfefxykwex Ahvsd Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

Condition: new, Year of construction: 2018, machine/vehicle number: DF0199 - Rev.00, pressing force: 160 t, pressure:160 t passage width:1200 mm Itodpjdxvfhofx Ahvod stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder Isdoyuvrdspfx Ahvstd - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Condition: not inspected (used), functionality: unexamined, table width: 350 mm, table length: 570 mm, wheel diameter: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Submitting an offer commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Flywheel diameter: 1,250 mm Table dimensions: 570 x 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 1,800 mm Machine weight: 600 kg Isdjyr N T Aepfx Ahvetd External reference: Lot 80