Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 2000 mm swing diameter over bed: 570 mm centre height: 270 mm centre distance: 2000 mm control for program: Siemens 802 C spindle bore: 83 mm revolution per minute: 1 - 20 / 2step U/min max. torque on the spindle: 1100 Nm longitudinal feeds:: mm/U Fgslrjvxtwuscrhhob cross feed: mm/U tailstock quill adjustment:: 200 mm tailstock quill: innen: MK5 mm total power requirement: 12 Kw (30 kVA) kW weight of the machine ca.: 3,4 t dimension machine xH: 3,7 x 2,0 x 1,75 m This is a servo-conventional lathe. 3-jaw lathe chuck Ø 260 mm with interchangeable jaws inside/outside Bed without offset Tool support swivels +/- 45°, travel 180 mm, with 4-fold Multifix tool holder live center in tailstock Operation via control panel Heidenhain measuring system Siemens 2-way length measuring system Coolant unit machine feet many accessories see photo incl. 1 x fixed steady rest + 1 revolving steady rest *

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Fgelrcrsip Nczehhob Equipment: Punching device quick change holder system Multifix, size Aa Machine light Coolant device

Condition: excellent (used), Year of construction: 1975, Machine type: Lead and spindle lathe Manufacturer: MATRA Model: D10 Year of manufacture: 1975 Condition: very good Type of offer: used machine Technical data Center height: 200 / 220 mm Center width: 1600 mm Fjlsu Dktzorcrhhegb Spindle bore: 52 mm Speed range: 26 - 2000 rpm Drive: 3.2 / 4.0 kW Remark: Forkardt 3-jaw wedge bar chuck Ø 200 mm with hard reversible jaws, additional 2 sets of base jaws with soft top jaws, Ideal quick-change holder with 5 inserts, coolant device, running center, drill chuck, keyless collet chuck with 26 collets Ø 2.0 - 31.0 mm, 20 square pliers 4.0 - 20 mm, 3 hexagon pliers 9-17-24 mm, running steady rest, spindle cone sleeve with tip, milling attachment for support, driver flange Ø 200 mm, various small parts, chip protection wall with chuck protection (not shown) Weight: 1500 kg The machine is in very good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: used, DHS 1-G / DHS1G, Feinmess Dresden GmbH Display Handling System SN:020702 Fgslrcroq S Tdgehheb Model: DHS1-G Condition: Used

Condition: excellent (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 250M-Y Max. machining diameter: 380 mm Max. machining length: 500 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - Mazatrol 640T Nexus CNC control - Kitagawa B-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Y-axis - Bar feeder interface - Automatic parts catcher - NC tailstock Fgslrcrhov N Et Ajhjb - Reinforced coolant pump - MAYFRAN chip conveyor - 10 stationary tool holders - 2 driven tool holders - IRCO short bar feeder

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm Fgelrot Rmdzecrhhob No C-Axis *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder * Fslrcou Ix Dcsrhhsgb

Condition: used, Year of construction: 1991, Technical data: Tip height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (24) 16 - 1400 min-1 Motor power 2-stage: 3.0 / 6.0 kW Tailstock holder: MK 4 Quill stroke: 130 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital readout, brand - 3-jaw lathe chuck, brand: Forkardt ø 200 - Emergency stop button - Multifix quick-change holder system - Machine light - Rotating center point - Coolant device Fgelsu Tfmfjrcrhhob

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Options: Chip conveyor 72-tool Capto C6 magazine Bar feeder interface Fgjlowcl Skjrcrhhob Parts catcher Hainbuch chuck 15 bar center-spindle coolant Renishaw RMP 600 5 continuous axes Flash tool

Condition: used, 6230-9-260 / 6230 9 250 / 62309250, VT-80 / VT 80 / VT80, Physik Instrumente GmbH & Co. KG Linear table with stepper motor Fgelrsq S T Ibecrhhjb Model: 6230-9-260 Type: VT-80 Condition: Used

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MY Max. Machining diameter: 380 mm Max. Machining length: 538 mm Max. Milling speed: 4,500 rpm Max. Spindle speed: 5,000 rpm Max. Bar diameter: 65 mm Machine is equipped with: - CNC CONTROL Mazatrol Matrix 2 - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - automatic parts catcher - NC tailstock Fgjlrcrheupth Rohsb - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2003, Functionality: fully functional, GENERAL Project No.: 905722 Quantity: 1 pc. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year build: 2003 Condition: Used Machine DESCRIPTION TURNING Max. turning diameter 356 mm Max. turning length 655 mm Max. Swing diameter over bed 520 mm Max. Swing diameter over cross slide 250 mm Max. Swing diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at 10-40/100% duty ratio 18 kW Spindle bore main spindle 75 mm Spindle flange size main spindle A2-8 Axis at main spindle unit C Hollow clamping cylinder at main spindle Tailstock NC-controlled 1 pc. Upper turret No. of stations/driven 12/12 Speed tool drive 6000 1/min Axis in turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse in X/Y/Z 18/-/24 m/min FURTHER EQUIPMENT Tool life time monitoring Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Machine operates/operated with oil Flush gun Coolant unit High pressure pump 40 bar Automatic CO2-fire extinguishing system Finish-part pick-up unit Bar loader/magazine FMB turbo 8-80 Warning lamp ACCESSORIES 1 pc. Collet chuck mm 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools GENERAL TECHNICAL DATA Fslsv Tbf Aorcrhhsgb Mains fuse 142 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 3495 x 2050 x 2222 mm Machine weight approx. 5800 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws Fgelrcrhevvrpkshob The machine does not comply with APR (accident preventing regulations) *

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 4200 mm Measurements depth 2380 mm Measurements height 2200 mm Machine weight 6750 kg Control Unit Brand FANUC Model Series 18i-T Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle bore 80 mm Tool taper 6 ASA Number of axis 4 Turret Number of turrets 2 Tools Number of index 12 Fgolrewdzchocrhheb Additional Equipment Bar feeder: Yes This 4-axis Biglia B56 S2M was manufactured in 1998. A robust horizontal turning machine featuring a FANUC Series 18i-T control, spindle bore of 80 mm, and a turning speed of 4000 rpm. It includes a bar feeder IEMCA Kid 80, enhancing productivity. If you are looking to get high-quality turning capabilities consider the Biglia B56 S2M machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Options: Chip conveyor 50 bar coolant 5 continuous axes Fgjlrcrhowcbi Eshob 110 Capto C6 tool magazine Flash Tool Renishaw RMP 600 3-color lamp Performance package

Condition: good (used), Year of construction: 2010, Functionality: fully functional, GENERAL Project No: 905696 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2010 Condition: Used Machine Programme run approx. [h]: 49.479 DESCRIPTION TURNING Max. turning diameter 210 mm Fgjlrcevfmdujrhhjb Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 550 mm turning dia. over face-slide: 390 mm turning length: 513 mm max. turning diameter: 300 mm z-axis: 580 längs mm x-axis: 205 plan mm control: Fanuc 21i-TB spindle head: A2-6 Fjlju Ix Inorcrhhjgb workpiece spindle bore: max. Ø 65 mm spindle passage: Ø 76 mm revolution per minute: max. 4.500 U/min rapid power traverse in X-and Z direction: 24 / 30 mm/min tool turret - number of stations: 12 spindle hours: 20742 h operating hours - idle run: 63097 h tailstock taper ISO: Konus MT#4 tailstock quill stroke: 80 mm current type: 3~, 200/220V / 50/60 Hz total power requirement: ca. 23 (28,95 kVA) kW Weight approx.: 4,15 t dimension machine xH: Tiefe: 4,0 x 1,8 x 1,8 m dimensions L x W x H: Stangenlader: 2,0 x 0,9 x 1,3 m Further technical information: Tool turret with 12 positions, including 3 positions for driven tools (max. speed 5,000 rpm), largest tool Ø 40 mm Tailstock operation via foot switch Bar loader LNZ Quick Load Servo 65, with 600mm pull-off device, material Ø min./max.: 6.0/65mm; bar length min./max.: 350 / 1300mm movable hinged belt chip conveyor LNS Turbo, with coolant tank and pump hydraulic unit Equipment: -controlled parts catcher for workpieces -machine lighting i.D. *

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 2300 kg Control Unit Brand FANUC Model 31i B Main Drive Number of axis 5 This 5-axis Goodway SW-20 swiss type turning machine was manufactured in 2013. Ideal for precision and complex machining tasks, it offers advanced capabilities for intricate parts production. Consider the opportunity to buy this Goodway SW-20 swiss type turning machine. Contact us for more information about this machine. Felowdy Tljrcrhhjgb Application Types Turning

Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift DESCRIPTION TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . Fgslrcrjiix N Ushheb We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips Folrcou Ix Arorhhjgb *

Year of construction: 2001, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840C Fjlrcrhjwdy Uvehjgb Additional Equipment Equipment: Bar loader and several driven tools This Index G200C horizontal turning machine was manufactured in 2001. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Index G200C horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No.: 905732 Quantity: 1 pc. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year build: 2011 Condition: Used Machine Spindle on approx. (hrs): 28381 Programme run approx. (hrs): 36646 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore main spindle 20 mm Axis at main spindle unit Z/C Headstock stroke main spindle 205 mm Max. rapid traverse in X/Y/Z main spindle unit -/-/40 m/min Hollow clamping cylinder at main spindle Max. speed opposed spindle 10000 1/min Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore opposed spindle 20 mm Axis at opposed spindle unit X/Z/C Travel in X/Y/Z opposed spindle unit 100/-/262 mm Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min Upper turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-40 bis +25/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min Lower turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-20 bis +40/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Machine operates/operated with oil Coolant unit with paperband filter High pressure pump 50 bar Automatic CO2-fire extinguishing system Part outfeed conveyor Finish-part pick-up unit Bar loader/magazine make FMB minimag 20 Max. bar length 3200 mm ACCESSORIES 2 pc. Collet chuck 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) 1 Set Changing tubes GENERAL TECHNICAL DATA Total power requirement 24 kVA Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm Fslrjv Tbd Escrhhogb Machine weight approx. 4000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Fslrcou Ix H Derhhjgb Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Year of construction: 2001, Condition: ready for operation (used), General Data Machine weight 2500 Control Unit Brand INDEX Model C 200-4 Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 90 mm Z-Axis Movement 280 mm This Index ABC was manufactured in 2001. A reliable horizontal turning machine, it offers consistent performance for precision tasks. Consider the opportunity to buy this Index ABC horizontal turning machine. Contact us for more information. Folrcowdzamerhhegb Application Types Turning

Condition: good (used), Year of construction: 2018, operating hours: 28,500 h, Functionality: fully functional, GENERAL Project No: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of Manufacture: 2018 Condition: Used Machine Programme run approx. [h]: 28.500 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Fgelrory Uhwscrhhob Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit with paperband filter Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.