Used Robofil 290 for sale (1,637)

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only. Itjdpjz Spd Iefx Ahbon

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Itsdpfx Aez T A I Hjhben Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit Itodpfx Aez Ef N Ashbsn - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Year of construction: 2019, condition: used, There are two Arburg ALLROUNDER 420C 1000-290 GOLDEN EDITION available, year of manufacture: 1x 2011, 1x 2019, an on-site inspection is possible. Iedpfxsz Sr Rzj Ahbjtn

Condition: good (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503729 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar equipment included incl. Spruepicker screen text german CEE-socket 16A core pulling hydraulically 1x Anti vibration mounts mould heating 6x handling type: Linear manufacture: ARBURG controller: INTEGRAL PICKER Itedpfx Aoz Eahaohbjn year of construction: 2012 measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Maximum reach between axis 1 and axis 6: 1,000 mm Repeatability according to ISO 9283: ± 0.03 mm Rotary unit Maximum rotation angle: 350° Safe positions: 0° / ± 90° / 180° Drive unit Maximum rotation speed: 16.8 °/s Maximum travel speed: 0.6 m/s Platform positioning accuracy: ± 10 mm / 1° Isdjz Im S Repfx Ahbstn Drive type: Differential drive Navigation: based on laser scanner data Average surface pressure on the ground: max. 10 N/mm² MACHINE DETAILS Wrist protection class: IP67 Arm protection class: IP65 Total system protection class: IP20 Battery capacity: 5.8–8.7 kWh Compressed air tank: 0.75 l Compressed air pressure: 7 bar Power supply: 1 × 230 V / 16 A Dimensions & Weight Dimensions without robot arm (W x H x D): 890 × 1,120 × 1,000 mm Weight: 730 kg Interfaces: WLAN, LAN, Fieldbus Multi-coupling: Compressed air, power supply, 2 × Cat5e, 26 × 1 mm² contacts EQUIPMENT Storage station for 4 tools Tool changing system MPS032 3 laser scanners with 360° monitoring range Height of the personnel-safe scanning plane: 150 mm 4 LED units Storage space for up to 16 audio files

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Iedpeyz Rxajfx Ahbjtn Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Isdpfxsz Ipy Rs Ahbstn Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by a servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Iedjz Ipzbepfx Ahbotn Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Itsdoz Sr Nqjpfx Ahben

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Ijdpfx Asz Iqaxshbjtn Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2021, condition: like new (used), machine/vehicle number: 100056463, This is a miniature Buchi B-290 spray dryer (Mini Spray), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, as well as industrial applications. It is a BUCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance. Itodpoz E Sq Hofx Ahben 💥 End-of-year clearance sale 💥

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Itsdpfx Ahoz Ip Smeben The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 1200T 1000-290 / Vertical machine with a rotary table Year of manufacture: 05.2012 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical machine with a rotary table Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 2 Control with hot runner system x 18 Injection unit hardened - bimetal Servo motor on the injection unit – fast suction and fast injection Proportional valve on the injection unit – precise injection Self-closing nozzle Primus sensor - tool pressure control Rotary table diameter: 1200 mm Dimensions: Iodpfxoz Ipx To Ahbetn Weight: 7200 kg Length/Width/Height: 4.36x1.71x3.66 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, For sale: Pilous ARG 290 CF-NC Automat automatic bandsaw Czech-made, fully automatic NC bandsaw for series cutting. The cutting length and piece count are programmed on the control panel; feeding, clamping, and cutting operate hydraulically in an automatic cycle. Stepless blade speed control is achieved via a frequency inverter. General Manufacturer: Pilous (TMJ), Czech Republic Model: ARG 290 CF-NC Automat Control: Unitronics Vision 230 Itedpfxoz H Nc Ae Ahbjn Technical data Cutting capacity at 90°: round [290 mm], flat [approx. 290 x 290 mm] Miter cutting: [stepless 90°–45°] Blade size: [2,910 or 3,110] x 27 x 0.9 mm Blade speed: [15–90 m/min], stepless Main motor: [2.2 kW], 400 V / 50 Hz Length setting: NC-controlled, 0.1 mm accuracy, multiple feed for long pieces Hydraulic clamping, saw bow movement, and material feed Coolant system Weight: 1,000 kg Equipment Blade cleaning brush Chip container Spare blade included

Condition: good (used), Year of construction: 2013, operating hours: 71,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503728 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2013 operation hours: 71000 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. Handling Anti vibration mounts mould heating 6x Itedpfx Ahsz Eaumebsn technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift 6 kg year of construction: 2013

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. Isdpfxjzrfrao Ahbotn The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Operating consumption values: Potable water approx. 40 l/min Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg Ijdpfxjz Ruwuj Ahbetn -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Itjdpfx Ahou E E Suobon Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: good (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table width: 450 mm, overall weight: 2,100 kg, table length: 680 mm, Equipment: documentation/manual, 3-axis erosion machine. Isdpfx Ahjz D Na Nobetn

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. Itjdpfx Ahjxzix Aebsn The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table Iedpfswz Iuxox Ahbstn - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Ijdpfxszw Azvj Ahbotn Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Machine no: 34, Books produced: 2 million Itodswnqtkjpfx Ahbsn

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Iedpfx Aow D R N Rohbjtn Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.