Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Machine Data Fslrcrhswfifgohjgb Manufacturer: Heidenreich & Harbeck Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 3 m Crane for loading operations available Material No.: 10342404 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot.

Condition: excellent (used), I am selling a Weiler Primus, which is in very good condition. It has been used very rarely over the past few years and exclusively for plastic machining. Fgolrcjwg Exxerhhsb The machine is equipped with a digital measuring system on 3 axes and is fully functional. No VAT will be added to the sale price.

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools Fjlrcowg D Thsrhhsgb MAPPS4/MSX-853 IV control system

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Fjlrjwg D Eqocrhhegb

Condition: used, Year of construction: 2013, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Fgolrcrewfhq Ijhheb Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: used, Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 540 mm, spindle bore: 90 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 540 mm, quill stroke: 120 mm, Cycle Lathe Manufacturer: Monforts Type: KNC8S Year of Manufacture: 2002 Turning Diameter over Bed: 830 mm Turning Diameter over Support: 540 mm Turning Length: 3000 mm Felrcrewfhh Hshhegb Tailstock: MK6 Quill, Stroke: 200 mm Chip Conveyor, Multifix Tool Post, Size D 4 Gears: 1. 1 - 225 rpm 2. 5 - 560 rpm 3. 7 - 900 rpm 4. 18 - 1600 rpm Accessories: 4 Tool Post Holders 2 Steady Rests Faceplate: 700 mm 3-Jaw Key Bar Chuck The machine is in used condition and is fully functional.

Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Machine Data Manufacturer: Heidenreich & Harbeck Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 2 m Crane for loading operations available Fgolrcewfifajrhhob Material No.: 10342422 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot.

Condition: good (used), 5/8" six-spindle multi-spindle lathe. Pietro Cucchi integral bar loader. Pneumatically driven pickup and threader in pos. 5. Chip extractor and coolant pump. Complete set of radial and face tool holders included. Good mechanical and electrical condition. Fully operational. Fgslrcrev H D Uashhjb

Condition: ready for operation (used), Year of construction: 1996, fanuc 18T 2 chucks weight 4500KGS Folrcrhsvt S Hwjhjgb

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: W490X1.5, Lathe Make: Löw Type: W490x1.5 Turning diameter above bed: 520 mm. Turning diameter above cross slide: 260 mm. Centre height: 260 mm Turning length: 1800 mm Speeds: 11 - 2240 rpm Spindle passage: 65 mm Thread - metric pitch: 0.05 - 112 mm Thread - inch: 1/4 - 56 inch Number of speed steps: 24 Total power requirement: 1.1 kW Machine weight approx.: 2.5 tons Machine dimensions approx.: 3.20 x 1.35 x 1.80 m Folrowg Apzocrhhjgb

Condition: used, Year of construction: 2012, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min Fgslswfhqzercrhhjb main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: good (used), Lot of toolholders and other equipement. Fgslrcrswfg Dtohhsb

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Controller LUXTRONIC (ISO programming) Z travel 400 mm Max turning dia 210 mm Fslrcrjwfgmhjhhogb Spindle power 1,1 kW Spindle bore d26 mm Spindle speed range 25 - 2000 rpm No of turret positions 8 Full power required 1,5 kW Dimensions L x W x H = 1700 x 700 x 1500 mm Weight 500 kgs Accessories - G codes: G01, G02/G03, G04, G33, G40/G43, G74, G81/G82, G84, G85, G86, G90, G91, G92, G94/G95, G96 - 3 jaws chuck D120 mm - Collet chuck with spare collets - Automatic turret - Low voltage working light - Tool holders (also for drills) - Manual in PDF (on german language) The lathe can be found in our showroom and is under power. It can be inspected after making an appointment.

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is arguably the best German lathe ever built in this class. BOHEHRINGER Precision Lathe Model DUE 400 Year of manufacture: approx. 1983 Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 205 mm Width between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle head: DIN 55027 size 6 Drive power: 11 kW Fgolrcrowfgrqshheb Max. torque: 2,000 Nm 24 speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MT 5 Space required: LxW approx. 3,500 x 1,525 mm Weight: approx. 3,850 kg Accessories: HEIDENHAIN 2-axis digital readout Coolant system; Large chip protection rear panel, 200 mm T lathe chuck; Roller conveyor cover for the lead screw support to the bed; Multifix C base holder including 1 holder; Operating instructions; Circuit diagram; Rapid traverse in the longitudinal and cross support Condition: The machine is in good technical condition. Backlash in the cross slide approx. 0.2 mm and top slide approx. 0.15 mm Spindle taper concentricity approx. 0.006 mm Machine bed geometry: Deviation approx. 0.01 mm over a bed length of approx. 750 mm (Measured on the flat track guide with a dial indicator towards the lathe chuck) The following parts were replaced: - Oil change - Cooling fabric hose Price net, ex works. Delivery with the company's own truck is available for an additional charge.

Condition: new, Center length ----- 700 mm Center height ----- 140 mm Spindle diameter ----- 280 mm Main spindle passage ----- 38 mm Bed width ----- 180 mm Spindle speed ----- variable 50-1800 rpm Frequency motor ----- 1.5 kW Including * DELTA frequency switch OPTIONS * Support box * SINO 2-axis digital readout Fgolrcrhsga Tv Tohob * Multifix quick-change chisel holder incl. 4 tappets TOOA1 * Fixed glasses * Meshing glasses * Chuck plate * 4 Chuck 160 mm

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Fgslrcowg Adforhheb Both machines have a counter spindle and an automatic chip conveyor. Both machines have a 24-tool turret. Live tools. A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Please contact us if you are interested.

Condition: used, Year of construction: 2015, operating hours: 148 h, Functionality: fully functional, turning length: 180 mm, turning diameter: 20 mm, spindle motor power: 2,200 W, spindle speed (max.): 10,000 rpm, rotational speed (max.): 6,000 rpm, bar passage: 20 mm, bar diameter: 26 mm, Equipment: rotational speed infinitely variable, Excellent condition CNC lathe featuring advanced technology for precision machining. Folrcswffh Djrhhogb Specifications: >Control System: Fanuc 32-iB >Year: 2015 >Operating Hours: Only 828 total hours (148 cutting hours ONLY) >Axes: 7-axis functionality >Spindles: Dual spindle, each with C-axis indexing (0.001° precision) >Main Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 2.2 kw >Counter Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 1.5 kw >Tooling: 4 driven tool positions (6000 rpm max), multiple turning and frontal tool holders >Barfeed: PRO HP326, 3.0mm – 26mm bar capacity Additional Features: >Collet systems for both spindles >Swarf tank, coolant system, pneumatic ejector >Belt-type chip conveyor >Integrated fire safety, electrical/software interface >Capability to switch from steady to sliding headstock operation A highly versatile and productive machine suitable for precision manufacturing.

Condition: used, Year of construction: 2015, Technical details: Fgslrcrsq Sc Hushhjb turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm

Condition: used, Year of construction: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital display, built in 1980, four-jaw chuck, Multifix with 3 holders. Machine in very good, operational condition, comes from a training workshop. Ready to demonstrate with power on by arrangement. Fgolrevx Sw Hscrhhsb

Condition: used, Year of construction: 2004, Max. machining dia. 20 mm Max. machining length 200 mm Max. spindle speed 200-10.000 rpm Spindle bore 24 mm Max. spindle speed (back spindle) 10.000 rpm Main spindle indexing 1 degree. Fsljv Efpporcrhhjgb No. of axis 8 pcs. Control: Mitsubishi/Meld 635 LC Equipped with: 6 pcs. rotary tools Magazine bar feeder Chip conceyor No tool holders comes along

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Main spindle passage ----- 52 mm Bed width ----- 187 mm Spindle speed ----- 90-2000 rpm Motor ----- 1.5 KW Fjlsga Tz Horcrhhjgb INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 barrels * Electric brake * 3-D chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED lighting and cooling system * Fixed and moving glasses * Box with various tools

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Fgolrcrhowfdz Nohsb Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), comes with a blue mobile cabinet with some spare parts Fjlrcrsv Rw T Dehhogb

Condition: excellent (used), Functionality: fully functional, spindle bore: 52 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Very well-preserved machine with good equipment Technical data and Felrcjv Iyz Sorhhegb accessories are listed in the offer! . .

Condition: new, Center length ----- 1000 mm Center height ----- 205 mm Turning diameter ----- 410 mm Main spindle passage ----- 52 mm Bed width ----- 250 mm Spindle speed ----- 45-1800 rpm Fgolrcrega T D Ejhhsb Motor ----- 3.3 KW INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 barrels * 3 Chuck 200 mm * 4 Chuck 250 mm * Clamping plate 350 mm * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools