Condition: used, 6230-9-260 / 6230 9 250 / 62309250, VT-80 / VT 80 / VT80, Physik Instrumente GmbH & Co. KG Linear table with stepper motor Model: 6230-9-260 Foln E Dsq S T Ibjt Uegb Type: VT-80 Condition: Used

Condition: excellent (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 250M-Y Max. machining diameter: 380 mm Max. machining length: 500 mm Feln E Dsv N Et Aet Ujgb Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - Mazatrol 640T Nexus CNC control - Kitagawa B-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Y-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 10 stationary tool holders - 2 driven tool holders - IRCO short bar feeder

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Felnet Rmdzj E Dt Usgb Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t Fgeln E Dsu Ix H Dot Ueb table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Options: Chip conveyor Fgeljwcl Skjn E Dt Usb 72-tool Capto C6 magazine Bar feeder interface Parts catcher Hainbuch chuck 15 bar center-spindle coolant Renishaw RMP 600 5 continuous axes Flash tool

Condition: good (used), Year of construction: 2003, Functionality: fully functional, GENERAL Project No.: 905722 Quantity: 1 pc. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year build: 2003 Condition: Used Machine DESCRIPTION TURNING Max. turning diameter 356 mm Max. turning length 655 mm Max. Swing diameter over bed 520 mm Max. Swing diameter over cross slide 250 mm Fgjlnsv Tbf As E Dt Ueb Max. Swing diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at 10-40/100% duty ratio 18 kW Spindle bore main spindle 75 mm Spindle flange size main spindle A2-8 Axis at main spindle unit C Hollow clamping cylinder at main spindle Tailstock NC-controlled 1 pc. Upper turret No. of stations/driven 12/12 Speed tool drive 6000 1/min Axis in turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse in X/Y/Z 18/-/24 m/min FURTHER EQUIPMENT Tool life time monitoring Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Machine operates/operated with oil Flush gun Coolant unit High pressure pump 40 bar Automatic CO2-fire extinguishing system Finish-part pick-up unit Bar loader/magazine FMB turbo 8-80 Warning lamp ACCESSORIES 1 pc. Collet chuck mm 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools GENERAL TECHNICAL DATA Mains fuse 142 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 3495 x 2050 x 2222 mm Machine weight approx. 5800 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 4200 mm Measurements depth 2380 mm Measurements height 2200 mm Fgeln Eowdzchj Dt Usb Machine weight 6750 kg Control Unit Brand FANUC Model Series 18i-T Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle bore 80 mm Tool taper 6 ASA Number of axis 4 Turret Number of turrets 2 Tools Number of index 12 Additional Equipment Bar feeder: Yes This 4-axis Biglia B56 S2M was manufactured in 1998. A robust horizontal turning machine featuring a FANUC Series 18i-T control, spindle bore of 80 mm, and a turning speed of 4000 rpm. It includes a bar feeder IEMCA Kid 80, enhancing productivity. If you are looking to get high-quality turning capabilities consider the Biglia B56 S2M machine we have for sale. Contact us for more information. Application Types Turning

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MY Max. Machining diameter: 380 mm Max. Machining length: 538 mm Max. Milling speed: 4,500 rpm Max. Spindle speed: 5,000 rpm Max. Bar diameter: 65 mm Machine is equipped with: - CNC CONTROL Mazatrol Matrix 2 Fgjln E Deupth Rjt Uob - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 2019, operating hours: 4,050 h, Functionality: fully functional, machine/vehicle number: STASV1220319EGCAH, turning diameter over cross slide: 508 mm, turning length: 527 mm, turning diameter: 336 mm, travel distance X-axis: 290 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,700 mm, total length: 4,500 mm, total width: 2,700 mm, tool mount: 40 mm, overall weight: 8,500 kg, bar passage: 78 mm, distance between centers: 824 mm, travel distance W-axis: 640 mm, operating hours of spindle: 1,040 h, Equipment: documentation/manual, Equipment Highlights: - Year of Manufacture: 2019 - Control: Integrated digital technical documentation - Counter spindle included - 12 tool positions, including driven tools - Incl. tool package Fgeln E Dtswdylhe Ueb - Turret: BMT65 / VDI40 (DIN 1809) - Fully integrated Y-axis - Recirculating roller guides on the X, Y, Z, and W axes - Transport on a standard truck possible Technical Specifications: - Spindle (Main Spindle): - Max. speed: 3,500 rpm - Max. bar capacity: 78 mm Counter spindle: - Max. speed: 6,000 rpm - Max. bar capacity: 46 mm Turret: - Type: BMT65 / VDI40 - Number of tool positions: 12 - Max. speed of driven tools: 4,000 rpm - Max. boring bar diameter: 40 mm mm - Shank cross-section: 25 mm - Indexing time: 0.15 s Machining range: Travel paths: - X-axis: 290 mm - Y-axis: ±55 mm - Z-axis: 560 mm - W-axis: 640 mm - Max. turning length: 527 mm - Center distance: 824.5 mm - Swing diameter over slide: 508 mm - Chuck diameter: 203 mm Max. turning diameter: - VDI: 336 mm - BMT65: 315 mm - with Y-axis: 224 mm Accuracy: - Positioning accuracy (VDI/DGQ 3441): 0.010 mm (new machine) - Repeatability: 0.005 mm (new machine) Feed rates: - X-axis: 24 m/min - Y-axis: 12 m/min - Z-axis: 30 m/min - W-axis: 30 m/min Installation dimensions & weight: - Dimensions (L x W x H): 4,500 x 2,700 x 2,700 mm - Weight: approx. 8,500 kg

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Details about the Traub TNK 36 (built in 2003) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 Fgolowgpmasn E Dt Uob • Traub TNK 36, built in 2003 All machines can be inspected and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Options: Chip conveyor 50 bar coolant 5 continuous axes Fjln Ejwcbi Ee Dt Uegb 110 Capto C6 tool magazine Flash Tool Renishaw RMP 600 3-color lamp Performance package

Condition: good (used), Year of construction: 2010, Functionality: fully functional, GENERAL Project No: 905696 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2010 Condition: Used Machine Programme run approx. [h]: 49.479 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fgolnevfmdus E Dt Ujb Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: ready for operation (used), Year of construction: 2013, General Data Felnjwdy Tls E Dt Usgb Machine weight 2300 kg Control Unit Brand FANUC Model 31i B Main Drive Number of axis 5 This 5-axis Goodway SW-20 swiss type turning machine was manufactured in 2013. Ideal for precision and complex machining tasks, it offers advanced capabilities for intricate parts production. Consider the opportunity to buy this Goodway SW-20 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder Fgsln Eswdyh No Dt Ueb - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Machining range: - Max. turning diameter: 500 mm - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Details about the Traub TNK 36 (built in 2002) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 Fgeln E Dswgpl Not Ueb All machines can be viewed and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: good (used), Year of construction: 2018, operating hours: 28,500 h, Functionality: fully functional, GENERAL Project No: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of Manufacture: 2018 Condition: Used Machine Programme run approx. [h]: 28.500 DESCRIPTION TURNING Fgoln E Djry Uhwjt Usb Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit with paperband filter Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 2001, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840C Additional Equipment Equipment: Bar loader and several driven tools Folowdy Uven E Dt Uogb This Index G200C horizontal turning machine was manufactured in 2001. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Index G200C horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift DESCRIPTION TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Fgsln E Dtoiix N Ue Ujb Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 2001, Condition: ready for operation (used), General Data Machine weight 2500 Control Unit Brand INDEX Model C 200-4 Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 90 mm Z-Axis Movement 280 mm This Index ABC was manufactured in 2001. A reliable horizontal turning machine, it offers consistent performance for precision tasks. Consider the opportunity to buy this Index ABC horizontal turning machine. Contact us for more information. Fgoln E Dtewdzamj Uob Application Types Turning

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No.: 905732 Quantity: 1 pc. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year build: 2011 Condition: Used Machine Spindle on approx. (hrs): 28381 Programme run approx. (hrs): 36646 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore main spindle 20 mm Axis at main spindle unit Z/C Headstock stroke main spindle 205 mm Max. rapid traverse in X/Y/Z main spindle unit -/-/40 m/min Hollow clamping cylinder at main spindle Max. speed opposed spindle 10000 1/min Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore opposed spindle 20 mm Axis at opposed spindle unit X/Z/C Travel in X/Y/Z opposed spindle unit 100/-/262 mm Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min Upper turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-40 bis +25/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min Lower turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-20 bis +40/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Machine operates/operated with oil Coolant unit with paperband filter High pressure pump 50 bar Fjlov Tbd Eon E Dt Uogb Automatic CO2-fire extinguishing system Part outfeed conveyor Finish-part pick-up unit Bar loader/magazine make FMB minimag 20 Max. bar length 3200 mm ACCESSORIES 2 pc. Collet chuck 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) 1 Set Changing tubes GENERAL TECHNICAL DATA Total power requirement 24 kVA Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm Machine weight approx. 4000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 2011, Condition: ready for operation (used), Control Unit Brand FANUC Model 32i-MODEL A Fsln Eewdzbqe Dt Uogb Main Drive Number of axis 3 Additional Equipment 12-Station Tool Turret (All Stations Driven) Hydraulic Tailstock Sandvik Capto C6 Tool Holder (4 pcs) Incl. SMW Autoblok Hydraulic Lathe Chuck 630 mm with Quick Jaw Change Incl. Hydraulic Steady Rest (Min. 110 mm Max. 530 mm) This 3-axis DOOSAN Puma 700 LM horizontal turning machine was manufactured in 2011. It offers robust performance for precision turning operations. Consider the opportunity to buy this DOOSAN Puma 700 LM horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 3153 mm Measurements depth 2500 mm Measurements height 1603 mm Machine weight 5200 kg Control Unit Brand FANUC Model MSC-701 / MAPPS III Feln E Dtewdy Tfs Usgb Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5/5.5 kW Number of axis 5 This 5-axis MORI SEIKI NZ-S1500 was manufactured in 2009, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-S1500 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 5120 mm Measurements height 2320 mm Machine weight 8300 kg Control Unit Brand FANUC Model F31iA / MAPPS IV Main Drive Spindle speed range 6000 Spindle bore 73 mm Number of axis 5 Turret Number of turrets 2 Fslewdy S Usn E Dt Uogb Media Chip conveyor Yes Additional Equipment Hainbuch SPANNTOP nova standard chuck combi Axfix size 65 // Hainbuch SPANNTOP nova standard chuck combi Axzug size 65 Knoll compact filter; KF 110/500 Delivery pressure 70 bar, compact belt filter system for cleaning cooling lubricants with filter fleece 2x high-pressure pumps (main / counter spindle) 500 I coolant tank Float switch Pressure relief valve Vario SPB-H-15 7 pressure stages via M command // High pressure system included Transformer 95.00 kVA IEMCA bar loader; Master 80HF incl. accessories for bar processing up to 3.3 meters Bar diameter max. 80 mm This 5-axis MORI SEIKI NZX2000/800SY was manufactured in 2012, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures reliable performance and durability. Consider the opportunity to buy this MORI SEIKI NZX2000/800SY horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2006, operating hours: 29,689 h, Condition: ready for operation (used), General Data Measurements width 1553 mm Measurements depth 3890 mm Measurements height 1890mm Machine weight 3500 kg Control Unit Brand FANUC Model 180i Main Drive Spindle speed range 5000 rpm Number of axis 2 Movement Folnswdy T Ej E Dt Uogb X-Axis Movement 210mm Z-Axis Movement 450mm Turret Number of turrets 1 Tools Number of index 12 This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 1997, Condition: ready for operation (used), Control Unit Brand INDEX Model C200-4 Fjln Eewdzcbo Dt Usgb This Index G200 was manufactured in 1997. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for workshops looking to enhance their turning capabilities. Contact us for more information. Application Types Turning