Positioning system SN:020702

Feinmess Dresden GmbH DHS1-G

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath Dcsdpfxok Egrps Ab Ter - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Condition: New machine Center height: 200 mm Center width: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with Dedpfx Asq Ui Tdob Tscr - 3-axis digital readout DPA 21 - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation Dedpfx Ajg Ewwreb Tjcr -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2021, condition: used, We are selling our chemical nickel work tank. The tank is made of acid-resistant stainless steel and electropolished on the inside. Sager and Mack pump and filter. Munk Protektostat Frequency converter for pump Heater with control and timer. From 10-93°C, approximately 1 hour 30 minutes. The internal dimensions are: L1200 x W600 x H950. The fill height is 880 mm, which corresponds to a volume of approximately 635 liters. Installation dimensions: L2100 x W900 Total connected load approximately 50A Djdpjqzgb Sofx Ab Tjcr If required, we can also create a customized solution for you.

Condition: good (used), Keyence Type: VR-6200 + VR-6000 Technical data: Measurable XY area 300 mm × 150 mm *2 Object table XY stroke 278 mm × 134 mm Z stroke 69 mm Load capacity 4.5 kg Working distance 75 mm Image capture device 4 megapixel CMOS, B/W Macro mode: Magnification (relative to a 15-inch monitor) 12× Horizontal 24.0 mm Vertical 18.0 mm Magnification (relative to a 15-inch monitor) 25× Horizontal 12.0 mm Vertical 9.0 mm Magnification (relative to a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro mode: Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Display resolution 0.1 μm Height measurement range Without Image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Dcedpfx Abor Dby Ij Ter Measurement accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Only 50 operating hours! With software CD without PC! Condition: (as new!) For further technical information, please contact the manufacturer. Scope of delivery: (As shown!) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, VHX-600E, Keyence Digital Microscope - New Dcjdpjq S Ti Eefx Ab Tor Model: VHX-600E Type: VHX-600E Condition: New

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 240 V, input frequency: 60 Hz, Used Keyence Digital microscope VHX 600E set in flightcase Manufacturer: Keyence Model: VHX 600 E Voltage: 100-240 VAC (50/60 Hz) Set consisting of; – Digital microscope computer + power cable – Digital camera – Lens – Camera holder + mount – Keyboard + mouse Dodpfxov Dh Rye Ab Tjcr – Console controller – Flightcase

Condition: not inspected (used), Coating thickness gauge Dcsdpeim Sc Sofx Ab Tor

Condition: used, 6166 000, TiMix 5, microtiter plate shaker Model: 6166 000 Type: TiMix 5 Condition: Used Dcodpfx Abouz Ebho Ter