Used Horizontal Slot Mortising Machine for sale (67,064)

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Kdsdpfjzk Nupsx Abner Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2023, Second-hand machine Year of manufacture: 2023 Condition: as good as new, only a few drill holes made Kdjdpozk Ni Tsfx Abnor Features and technical specifications: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Work table rotation: ±60° Work table length: 565 mm Work table width: 315 mm Extraction nozzle diameter: 90 mm Output power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Kedpfoy Apfnjx Abnsdr Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1160x750x1080 mm Weight 260 kg Total power requirement 2,2 kw Ksdpfxovz Hmbo Abnedr

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Kdodsythcrspfx Abner Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x740x1260 mm Weight 240 kg Kodpjvz Hm Iofx Abnedr Total power requirement 2,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x1150x1250 mm Kdsdpfjvz Evnox Abner Weight 550 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Weight 120 kg Total power requirement 2,2 kw Kdodjvz Hk Tspfx Abnor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Weight 700 kg Total power requirement 1,9 kw Kjdpfxjv A Hydj Abnodr

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Features and technical specifications: - The drilling depth is adjusted via a maintenance-free linear guide - Efficient and cost-effective operation thanks to the rapid-lift system, eliminating the need for laborious cranking - Smooth-running and infinitely variable drilling unit - Height adjustment with fine adjustment and gas pressure cylinder for weight compensation - Transverse and height adjustment with scales and adjustable stops - Vibration-free operation thanks to robust steel construction - Drilling depth adjustable via a scale and stop - The drill head height adjustment can be used entirely for vertical slotting - Large-dimension grey cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm Kjdszk Nlnspfx Abnedr - Drilling width: 340 mm - Height adjustment: 145 mm - Swivelling drill head: -60° to +60° - Drilling table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: at short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Ksdpfx Abszuwt Iensdr Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Kdjdpjvwfr Ijfx Abner

Condition: used, Year of construction: 1988, Slot drilling machine Kedpfx Abezuynuensdr Manufacturer: SCM Type: AS 16 Year of manufacture: approx. 1988

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. Kodpfezk U Hwox Abnedr The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment.

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Kedpfx Aovwf H Eobnodr

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Kdodpfx Abevwfrzonor

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Kdjdpfjzrl H Rex Abnor Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove. Kodpeg Uq Dfjfx Abnodr

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Kjdpfxsw Nv Nxo Abnodr Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg

Condition: excellent (used), Year of construction: 2014, 2014 DMG MORI NHX 5000 CNC Horizontal Machining Centre with Siemens 840D SL Control High-Performance DMG MORI NHX 5000 CNC Horizontal Machining Centre, Manufactured In 2014 & Equipped With Siemens 840D sl CNC Control. The machine Has Recorded 23,262 Power-On Hours, 15,894 Spindle Hours And Is Available For Inspection Under Power. Designed For Precision Machining, The Machine Features A 12,000rpm (30kW Motor) SK40 Spindle, 2-Pallet Changer (500 × 500mm (5 'T' Slots), 40-Position Automatic Tool Changer, 1° Indexed B-Axis Table. Axis Travel 'X'=730mm, 'Y'=730mm, 'Z'=880mm. Rapid Traverse 'X,Y & Z'=60m/min. Maximum Spindle Torque 102 Nm. Twin 500 × 500 mm Pallet Changer. Maximum Pallet Load 500 kg. Maximum Workpiece Ø630 x 900mm High. Total Connected Power Load 57 kVA. S/No. 1229000053 (2014) With 40 bar High Pressure Through Coolant System, Chip Conveyor, Renishaw PP60 Touch Spindle Probe & Machine Documentation. Machine Weight Approx. 11.5 Tonnes. Kodpfxszvcl Se Abnodr

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 255179729, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 74 kVA, torque: 525 Nm, controller manufacturer: Mazak, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 1,500 kg, total height: 3,200 mm, total length: 6,400 mm, total width: 2,600 mm, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, overall weight: 19,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 80, mount diameter: 50 mm, tool length: 500 mm, tool diameter: 420 mm, tool weight: 30,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in full working order. It is being sold due to a new acquisition and lack of space. The table has a swivel axis of 1/360°. Included with the machine are some tool holders, an external coolant drum filter tank with a capacity of approximately 800-900 liters (L/W/H: 1800mm, 800mm, 650mm), a Renishaw MP10 measuring probe system, a grid structure in front of the machine (partially mobile), and 2 pallets measuring 630x630. Machine dimensions L/W/H: approximately 6400mm/2600mm/3200mm. The buyer is responsible for dismantling and removing the machine. The machine can be inspected while powered on. Appointment by arrangement. Kjdpfszkkdrex Abnodr

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Kdsdpfx Ajvuq Hlobnor Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: used, Camam Horizontal and vertical double mortising machine. 2 double horizontal spindles 3 vertical spindles right side 3 vertical spindles left side Ksdpfx Abewt S E Eenjdr

Condition: used, functionality: fully functional, input voltage: 400 V, BÄUERLE horizontal boring machine, very solid construction, 3D table, on chassis, drill bit set included, 400V 16A connection with fuse. Kedpoyz U R Tofx Abnodr

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: V374C0020, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, nominal power (apparent): 31 kVA, torque: 197 Nm, controller manufacturer: Heidenhein, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, table width: 1,000 mm, table length: 1,200 mm, table load: 3,000 kg, rotational speed (min.): 15,000 rpm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1 h, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Centre – ZPS MCV 1220 – 5-Axis – 2018 Manufacturer: ZPS Model: MCV 1220 Year of manufacture: 2018 Condition: In production, fully operational Availability: Immediately Serial number: On request Machine location: Address visible Control System CNC control: Heidenhain TNC 350 Number of axes: 5 Working Area X-axis travel: 1200 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Kdjdpoymmd Uefx Abner Table size: 1200 × 1000 mm Max. table load: 3000 kg Spindle Spindle speed: 18,000 rpm Spindle power: 31 kW Tool interface: HSK 63 Coolant through spindle: Yes Tool Changer Number of tool stations: 40 Type: Chain-type tool magazine Equipment - Chip conveyor - Through-spindle coolant - Fully enclosed working area - Electronic handwheel - Renishaw measuring probe - Machine documentation Key Information - The machine is equipped with a fully refurbished CYTEC angle head with 0 operating hours. - Linear guides and carriages have been refurbished. - The complete machine geometry has been verified and recalibrated. - The machine is offered in operating condition. - Power-on test run possible at the seller's premises prior to purchase. - Disassembly and loading after payment to be arranged by the buyer. - Price includes tool holders, tools, and Renishaw probe. Dimensions & Weight On request