Used Machining centers (horizontal) X-axis travel over 1200mm for sale

Machining centers (horizontal)

GROB Sonderanfertigung

2011

excellent (used)

€14,000

Call

TECHNICAL DETAILS Travel X / Y / Z: 1,700 / 750 / 630 mm tool magazine: HSK 100 tool places: 120 pieces motor spindle: 20 kW speed: max. 6.000 rpm MACHINE DETAILS space requirement: 7400 x 6800 x 3500 mm weight: 19 t Voltage: 400 V frequency: 50 Hz Room condition: 10 - 35 °C; 10 -70% humidity Sound level: 75 dB Hydraulic volume: 50 l Cooling lubricant: Emulsion pressure: 3 bar Spindle cooling: water + corrosion protection, < 16 °C Pressure: 5 bar EQUIPMENT - Chip conveyor - light barri...

Listing

France

19201 km

DAEWOO ACE H800

1999

ready for operation (used)

Call

General Data Measurements width 4100 mm Measurements depth 6850 mm Measurements height 3240 mm Machine weight 18000 kg Control Unit Brand Fanuc Model Series 18-M Re3gn Main Drive Spindle speed range 4500 Spindle motor power 15 KW Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1000 mm Z-Axis Movement 1000 mm Table Outer length 800 mm Outer width 800 mm Table load 2000 kg This DAEWOO ACE H800 Horizontal Machining center was manufactured in the year 1999 in Korea. It is equi...

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

CNC Horizontal Boring & Milling machine

HNK HB-130 Horizontal Boring machine

2012

excellent (used)

Call

HNK (Korea) Model HB-130 Serial Number12739 Year of manufacture 2012 CNC Control FANUC 31iMB TABLE Working Surface 1,600 X 1,800 mm Maximum Table Load 15,000 Kg Resolution (every 90 degree by location pin) 0.001 ˚ Maximum rpm 1.4 rpm TRAVELS Longitudinal Travel ( X-Axis) 4,000 mm Vertical Travel (Y-Axis) 2,300 mm Cross Travel (Z-Axis) 1,600 mm W-Axis Travel 700 mm Distance from spindle centre to table surface 0-2,000mm Distance from table centre to spindle nose 750-2,050mm Cgr0yypj7l ...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

18105 km

Machining center (horizontal)

TOS Prima

2007

good (used)

Call

Control system: Heidenhain iTNC 530 Total hours: 66000 h Cutting Hours: 24830 h Length of the working table: 1250 mm Width of the working table: 1000 mm Number of tools in the magazine: 40 pcs X-Axis travels: 2000 mm Y-Axis travels: 1300 mm Z-Axis travels: 1600 mm Total power demand: 65 kVA Max. tool diameter: 125 mm Max. tool lenght: 500 mm Max. tool weight: 25 kg Maximum tool weight: 1000 kg Rapid traverse: 30000 mm/min Range of working feeds: 1-20000 mm/min Equipment: Chip co...

Listing

Via Louis Blériot, 5/9, 25018 Montichiari BS, Italia

18688 km

horizontal machine center

DOOSAN H100

2007

good (used)

Call

X AXIS TRAVEL 2000 MM Y AXIS TRAVEL 1120 MM Z AXIS TRAVEL 1000 MM DIST. BETWEEN CENTRE OF SPINDLE TO PALLET AXIS Y: 75 - 1195 MM DIST. BETWEEN SPINDLE NOSE TO CENTER OF PALLET AXIS Z: 200 - 1200 MM N.02 PALLET 1000 X 1000 MM PALLET CAPACITY 2000 KG (EACH) ROTARY TABLE POSTIONING : 4 X 90 ° WORK FEEDS AXES: X-Y-Z 5000 MM/MIN RAPID FEEDS AXES: X-Y-Z 12 MT /MIN Kza0zy9w RAPID FEED AXIS: B 3 RPM SPINDLE TAPER ISO 50 DIN 69871 A SPINDLE SPEED 6000 RPM CNC FANUC 18i MB TOOLS CHANGER 60 POST CHIP CONVE...

Discover more used machines

Machining centers (horizontal) X-axis travel 600-799mm

Machining centers (horizontal) X-axis travel 400-599mm

Horizontal milling

Horizontal center

Horizontal machining center

Machining center horizontal

Horizontal machining centre

Horizontal machine center

Cnc horizontal borer

Horizontal cartoner

Auction

Bayern, Germany

18497 km

Machining Center - Horiz.

AXA Vario 2

1999

good (used)

€15,000

Call

The machine has done little "heavy machining" (was mainly used for drilling and tapping) TECHNICAL DETAILS drilling length X / Y / Z: 1.760 / 500 / 620 mm speed: 30 - 6000 rpm Control: Heidenhain TNC 410 M Cr8pwkgcty table: 2.030 x 500 mm Table load: max. 800 kg MACHINE DETAILS height: 3900 mm length: 2900 mm width: 3000 mm Weight: 9 t SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 control cabinet (integrated in the back of the machine) Ball screws: Deutsche Star...

Listing

Niederhelfenschwil

(dealership location)

18685 km

STARRAG ZT 800/110

used

Call

Spare parts (spindles) for Starrag machine ZT 800 / ZT 1000 Ckjx08edqn 2x Ø310x800mm (150mm x Ø128.5mm) 1x Ø310x1000mm (340mm x Ø128.5mm) Various ball screws to Starrag - partly new ground - partly new (unused)

Listing

Weiherhammer

18384 km

Uni. machining center 6fold pallet pool

DÖRRIES SCHARMANN SOLON 3 HV

1998

good (used)

€49,900

FCA Fixed price plus VAT

Call

DÖRRIES SCHARMANN SOLON 3 HV Universal machining center for 5-sided machining with linear storage 6-fold pallet system year of construction: 1998 Control: SIEMENS SINUMERIK 840 C machine number: 123653 travels: X - 1.600 mm / Y - 1.300 mm / Z - 1.260 mm B-axis 360.000 degrees / A-axis automatic H/V head vertical/horizontal total weight approx. 65.000 kg Equipment: Linear storage with 6-fold pallet system consisting of: - 2 stations in front of the machine - 4 storage stations - 1 set-up statio...

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

CNC Horizontal Boring & Milling machine

Giddings and Lewis MC50 Twin Pallet HBM

1987

good condition (used)

Call

USED GIDDINGS AND LEWIS MODEL MC 50 TWIN PALLET HORIZONTAL MACHINING CENTRE WITH LIVE SPINDLE, 60 ATC AND G&L 8000A CONTROL SYSTEM. Serial # 445-1052.YEAR OF MANUFACTURE: 1987 MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPINDLE DIAMETER 130 MM SPINDLE TAPER 50 ISO SPINDLE TRAVEL (Z AXIS) 915 MM SPINDLE SPEEDS (4 RANGES) 5 to 1500 RPM MAIN MOTOR 30 HP Ccw33ul8jo PALLET SIZE 1219 x 1245 MM PALLET ROTATION I...

Listing

Grand Prairie

12186 km

Bavius HBZ AeroCell Machining Center

Bavius HBZ AeroCell 700/200

2018

used

Call

2018 Bavius HBZ AeroCell 700/200 Horizontal 5-Axis Aluminum Machining Center Cogb9i07y0 sn 200937. Designed for production of large Aluminum Structural Parts, in the Aerospace and Automotive Industries. Material removal rate up to 304mm/min. Hours readings: Total Hours Power On Time, Total Hours Cutting Time, . Specifications: Machine with integrated pallet automation with two pallets. Axes travels: X-axis: approx. 7,800 mm, Y-axis: approx. 2,000 mm, Z-axis: approx. 700 mm, C-axis: approx. 200 d...

Listing

Brașov

17507 km

heavy duty 3 axis CNC -Precision machine

Mazak V 12 -Retrofit 2019

1984

ready for operation (used)

€19,000

SBZ400 - 3000 rod machining center

Call

CNC 3 axis Spindle : 5000 rpm Retrofit center: FANUC Djoaa7b Retrofit new engines for x,y,z with 4KW Standard G-Code Fanuc Length of work table 1240 mm The width of the work table is 500 mm Travel length X-axis (mechanical feed) 1250 mm Travel length Y-axis (mechanical feed) 500 mm Travel length Z-axis (mechanical feed) 500 mm weight 8 tons Machine is ready for operation and can be tested in our company .

Listing

Giengen an der Brenz

18554 km

Wegoma GmbH

2016

good (used)

€40,000

Call

SBZ400 - 3000 bar machining center 4-axis bar machining center for economical machining of aluminum and steel profiles. steel profiles. Working length 3000mm, all machining operations like milling, drilling, thread cutting, etc. Tool changer with 7 free places, working length X-axis 3000mm (60m/min), working width Y-axis 400mm (20m/min), working height 2 axis 300mm (20m/mir), rotation Tool holder 90°/0°/-90°. Equipment: PC control with machining program 4 adjustable workpiece clamps 2 tool plndl...

Listing

Unterschleißheim

(dealership location)

18484 km

HECKERT CWK1600P

2000

used

Call

x-travel 2.300 mm y-travel 1.900 mm z-travel 1.500 mm Control SIN840D w-axis 500 mm feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min B - axis 360 x 0,001 ° feed B-axis 8,00 U / min size of pallet 1.600 x 1.250 mm table load 5,00 t interference diameter 2.200 mm spindle turning speed range 20 - 4.200 U/min power capacity - workpiece power 28,00 kW tool taper SK50 spindle diameter in front bearing 170 mm B8hjfprquy max. torque on the spindle 820 Nm tool magazin: 225 tool diam...

Listing

Menziken

18763 km

MATEC 3OHV / 6000

Matec 30HV

1999

good (used)

€23,000

Twin pallet horizontal machining centre

Call

Machine is still in operation and you can visit and try the machine. Small note: tool magazine changer with 24 tools Criy8me3as Preferred communication by phone at the number +41 77 449 95 73

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

TOYODA FH100 II

2001

good (used)

Call

Toyoda FH100 II twin pallet horizontal machining centre with 120 station ATC and Fanuc 16iM control. Year of manufacture 4/2001. Serial number NM9224. TABLE Pallet Size 1050 X 1050 mm Maximum Load Capacity 3,000 KGS Minimum Index Angle 1° FEED X-Axis 1600 mm Y-Axis 1400 mm Z-Axis 1150 mm Distance from Table Surface to Spindle Centre 50 ~ 1450 mm Distance from Table Centre to Spindle Nose 20 ~1400 mm SPINDLE Spindle Taper BT50 Spindle rpm 10-6,000 RPM Spindle Motor Output (Max/Cont.) 26.0 / 2...

Listing

Pfullingen

18627 km

HDC2000

STADLER KEPPLER

2010

reconditioned (used)

Call

HDC2000 with manufacturer's warranty, NC rotary table, horizontal spindle HSK100 and pallet changer 2-fold 4ton. Loading weight per pallet!!!! travels X=2000 mm, Y=1500 mm, Z=1400 mm - Siemens 840 DsL, 2 control panels - NC rotary table for multi-side machining 1250 mm x 1250 mm pallets - Horizontal spindle HSK A-100, 2200 Nm, max. speed 2500 rpm Rzd7t - Optimized for heavy machining - Tool changing system HSK 100 / 40 places - Chip conveyor (screw conveyor) - Chip conveyor Scraper conveyor - BK...

Listing

Kümmersbruck

18405 km

Baujahr 2003

Emmegi Index

2003

excellent (used)

€14,000

Call

3-axis machining center for machining aluminum, PVC and thin-walled steel profiles - CAM module available - Mobile tool magazine - Additional material stop for I8n8aedd Available: immediately

Listing

Zittau

18145 km

Machining Center - Horiz.

WALDRICH SIEGEN µPM 1250

2003

used

Call

x-travel:2.000 mm y-travel:1.250 mm z-travel:1.400 mm turning speeds:20-5.000 1/min max. torque on the spindle:750 Nm tool taper:HSK 100 28dyin control:SIEMENS 840D tool change unit:60 Pos. size of pallet:1.250 x 1.250 mm mm spindle:20 kW rapid traverse in x-y-z axis:18 - 18 - 18 m/min table load:3 / 5 t weight of the machine ca.:15 t dimensions of the machine ca.:10,5 x 8,5 x 4,1 m horizontal machining center, hydrostatic guideways X/Y/Z for high precision machining, NC-roundtable, 2 pallets...

Listing

Niederhelfenschwil

(dealership location)

18685 km

FILL SM-02

2012

used

Call

CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 1500 mm .. Y-axis travel: 850 mm .. Z-axis travel: 650 mm SPINDLE / HEAD .. spindle type: horizontal .. spindle revolutions (max): 8000 /min .. tool fixture: HSK A100 TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 8 .. tool diameter max.: 125 mm .. - with free neighbour positions: 400 mm...

Listing

18384 km

CNC Horizontal Boring & Milling machine

PEGARD Flexivit BC TRT 1400

2000

used

Call

x-travel:3000 mm y-travel:2000 mm z-travel:1750 mm Rgowv table-size:1600 x 2000 mm max. table load:11000 kg speeds:4000 U/min numbers of tools in magazin:60 b-axis:360 °

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

Giddings and Lewis Euroborer

2000

used

Call

USED GIDDINGS & LEWIS EUROBORER - YOM 2000 - SERIAL NUMBER 450-1197 - TWW Cat 7618 MACHINE CONSTRUCTION & FEATURES • Heavy Duty Cast Iron Bed Construction Ciivjvhvis • Siemens 840D SL Control System • 3,500 Rpm 130 MM Dia Main Spindle • Heavy Duty Hardened & Ground Square Slide Ways • Full Surround Guarding System TABLE Working Surface 1,250 X 1,600 MM Tee Slot (Size X Number X Pitch) TBA Maximum Table Load 11,360 KGS Resolution 0.001 ˚ TRAVEL Longitudinal Travel X-Axis 2,500 MM Vertical ...

Listing

Zevenbergen

18629 km

CNC Precision Horizontal 5-axis Machinin

YASDA YBM-900N

2001

used

Call

CNC Precision Horizontal 5-axis Machining Centre CNC Control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 Max. workpiece diameter x height 1400x1200 mm Ch88xf3wgo Movement X-Y-Z-Axis: 1800 mm A-Axis (table tilt) +20 / -110 B-Axis travel 360° Spindle taper DIN 69871/50A Spindle speed 10.000 R/Min Tool store capacity 240 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertis...

Listing

Germany

18384 km

CNC Machining Center - Double Pallet

Pegard Precivit 2 BC TRT 1800

2003

good condition (used)

Call

Pallets size: 1800x2500 mm Max workpiece weight per pallet: 20.000 kg Tool Magazine: 187 Pockets Ogxgs02z -Travels- X-axis: 3500 mm Y-axis: 2500 mm W-axis: 1700 mm Z-axis: 1000 mm B-axis: 360000 pos. -Working spindle- Diameter: 150 mm Diameter in the front main bearing: 220 mm Spindle with steep cone according to DIN 2079: ISO 50 Digital three-phase motors, drive power ( 100%): 60 kW Speed range of the working spindle under load, infinitely variable in four areas: 10...3000 min-1 Max...

Listing

Amstetten

18577 km

Drilling-milling center BFZ 3000

RÖDER BFZ 3000

2018

as good as new (ex-display)

€115,930

Call

DRILL MILLING MACHINE BFZ 3000 for the cost-effective production of long parts from steel, stainless steel and aluminum Demonstration machine year of manufacture 2018 control Siemens SINUMERIK 808 D Advanced max. working range x-axis 3.000 mm max. working range y-axis 260 mm max. working range z-axis 300 mm tool holder BT 30 speed main spindle 4000 rpm at i=2 (different gear ratios possible) drive power main spindle 7,5 kW Main spindle torque 48 Nm at 40 % ED rapid traverse 40,000 mm/min Drill...

Listing

Pressbaum

(dealership location)

18180 km

CNC milling machine

Mazak VTC 20 b

good (used)

€15,000

Call

X axis 1120 mm Y axis 510 mm Z axis 510 mm table size: 1460 x 510 mm spindle speed: 40 - 7000 rpm Cjgc8p30eh spindle mounting: SK40 rapid traverse: X axis 20 m / min Y axis 20 m / min Z axis 20 m / min Feed rate: 1 - 50000 mm / min

Listing

Hilden

(dealership location)

18565 km

Horizontal milling center

STARRAG HECKERT HEC 630 Athletic

2009

used

Call

x-travel 1200 mm y-travel 950 mm z-travel 1200 mm Control Sinumerik 840D B-axis: pallet clamping area 800 x 630 mm Rhsyx max. load 1500 kg workpiece interference circle diameter 1250 mm workpiece height max. 1200 mm number of exchangeable pallets 2 change time of pallets 14 sec working spindle: tool taper HSK-A100 power capacity at 25% load 67 kw torque (25% ED) 1508 Nm turning speed range 20 - 6000 U/min feed speeds x/y/z axis 60000 mm/min feed capacity X/Y/Z axis 22/18/22 kN weight of t...

Listing

Loyettes

19042 km

HAAS EC1600 4x

2008

excellent (used)

Call

Haas ec1600-4x horizontal center for sale Number of axes 4 (B-axis rotary table) Year of manufacture 2008 SK50 cone Spindle gear box 2 gears TRAVEL x 1626mm (table) Ckggpwnjyc y 1270mm(spindle) z 813mm (table) b 0.001 deg Magazine of 30 tools Max table load 4539kg Table clamping area 1626x914 High pressure spindle cooling Spindle speed 6000rpm tool measuring probe Weight 14500kg

Listing

Zevenbergen

18629 km

CNC Hor. Production line with 14 pallets

Mazak FH 880 PMC

1997

used

Call

CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stoc...

Listing

Halberstadt

18302 km

CNC - machining center - horizontal - 4 Axis

FOREST LINE Fimax P150

1996

used

Call

Ref. -No.: 10024 Pxrxti Brand: FOREST LINE Type: Fimax P150 Year of construction: 1996 Type of control: CNC Control: Siemens Sinumerik 840 C Storage location: Halberstadt Country of origin: Frankreich X-Travel: 4000 mm Y-Travel: 2000 mm Z-Travel: 1800 mm Machine length: 13250 mm Machine width: 9503 mm Machine Height: 5229 mm Spindle Diameter: Ø 150 mm Table Dimensions (Lengthxwidth): 1250 x 1600 mm Numbers Of Tools In Magazin: 130 Rapid Traverse X-Axis: 15 m / min Rapid Travel Y-Axis: 15 m / mi...

Listing

Düsseldorf

18570 km

Machining center with dual switch palets

Pegard PRECIVIT 2 BC TRT 1800

2003

excellent (used)

Call

Pallet size: 1800 x 2500 mm Max. workpiece weight per pallet: 20.000kg Driving power: 60 kW Travels X-axis/ table displacement: 3500 mm Y-axis/ vertical displacement: 2500 mm W- axis: work spindle movement: 1000 mm B- axis: rotary table: 360 000 pos. Working spindle diameter: 150 mm diameter in front main bearing: 220 mm spindle with steep taper according to DIN 2079: 220 mm Digital three-phase motors, drive line(100%): 60kW Speed range of the working spindle under load, infinitely variable ...

Listing

Łódź

17811 km

Haas VF4 machining center

HAAS VF-4

2019

excellent (used)

€85,000

EXW Fixed price plus VAT

Call

Haas vf4 with additional equipment such as: AUGER - screw chip ejector SMTC-30-40T Side tool changer with 30 positions. ACF Additional 25 µm filtering system, necessary when processing cast iron, aluminum, wood, plastics based on phenolic resins and other dusty materials I9gtfzl P-COOL Programmable angular position of the coolant nozzle WIPS-R Cableless probe set for measuring tools on radius and length, for measuring and setting workpieces with measuring cycles. Includes SO, MACRO, COORD ...

Listing

Italia

18559 km

Double head drilling machineZayer CF6000

YASDA YBM-1000N

2000

good (used)

Call

CNC controller: FANUC 160-MB Axes X-axis travel mm: 2.100 Y-axis travel mm: 1.400 Z-axis travel mm: 1.700 Distance spindle nose - table surface mm: 0 - 1.400 Worktable Number of pallets: 5 Table dimensions mm: 1.250x1.250 Spindle Spindle speed rpm: 50 - 15.000 Spindle drive power kW: 30 (30 min. rating) Cooling Cooling through the Spindle Center: 35 Tool system Tool holder: MAS-BT50 Tool magazine slots: 240 Max. Tool Diameter mm: ø300 Max. Tool Length mm: 440 Max tool weight kg: 20 Equipment Chi...

Listing

Крагујевац

17881 km

Zayer CF6000

1988

ready for operation (used)

€60,000

FCA Fixed price plus VAT

Call

Machining center for metal processing. ▪ Manufacturer: Zayer ▪ Model: CF 6000 ▪ Year: 1988 ▪ Features of the processing center: - Table travel X-axis: 6 meters - Two processing heads - Mode of operation of units: common and combined - Working range (x, y, z - axes): 6m x 1m x 7.5m - Steering unit: Heindehain 155 Myixt8 Average with traces of normal exploitation. All elements of the machine are functional and regularly maintained. Electric installation are normal-looking installations with no vis...

Listing

Augsburg

18521 km

Multi Tec BAZ horizontal

WALDRICH Multi Tec 4000 HC

2001

excellent (used)

Call

Siemens 840D X-Y-Z axes 4000 x 2500 x 1500 mm W-axes -2000/+5000 mm (front pos./rear pos.) column unit C-axis 360° in 1° steps Cjfboqhnp0 B-axis (pallet rotation around Y-axis) rotary table diameter 2000 mm pallet set-up station with 2 pallets 2500x2000 mm passage width of pallet changing doors 3700 mm, max. swing circle 4200 mm table load per pallet 20 to Autom. aggregate changer with 5 places milling spindle horizontal VS 125 C/M4, SK 50, rpm 6000 angular head HS 125C/M4 SK 50, rpm 6000 Angle ...

Listing

Metula

16360 km

DoosanHorizontal milling center 1250mm

DOOSAN HM1250

2011

excellent (used)

Call

FANUC31i - MODEL A CNC version: Doosan HM1250 Cutting Time 12272 hour X axis: 2100 mm Y axis: 1500 mm Z axis: 1500 mm Number of pallets: 2 Rhqtl Table – Pallet dimensions : 1250 X 1250 mm x mm Max load on table: 8000 kg Index degrees: 1 ° Number of tools: 120 Spindle taper toolholders: 50 BT / SK / ISO / HSK Spindle speed rotation: 6000 rpm Through spindle coolant: Yes Power: 22 kW Chip conveyor: Yes Location in Israel . Time from international Airport -90minut Under Power and ready for inspec...

Listing

Blintendorf

18348 km

HORIZONTAL MILLING MACHINES

TRIMILL DEPO HC 1612

2007

excellent (used)

Call

Control Heidenhain 530 iTNC Yvfe8w Working ranges X-axis [mm] 1.600 Y-axis [mm] 1.200 Z-axis [mm] 800 B-axis rotary table 360 ° C-axis W axis Milling head Integrated fork milling head with main spindle HSK 100 Power (S1/100%) [kW] 25 Torque (S1/100%) [Nm] 200 Speed [rpm] 12.000 Tool holder HSK - A100 Size of table top [mm] 1.600 x 1.600 Workpiece weight [kg] 10.000 kg Traversing speeds [mm/min] 30.000 Axis accelerations [m/s2] 2.5 Automatic tool changer for 12 tools IKZ Chip removal system Mach...

Listing

Saint-Étienne

19115 km

horizontal machining center

DOOSAN DAEWOO ACE H800

1999

ready for operation (used)

€45,000

EXW Fixed price VAT not applicable

Call

Year of manufacture: 1999 Dimensions of the 2 pallets: 800x800 mm Weight allowed on pallet: 2000 kg 2vaxvi X-axis travels: 1250 mm Y-axis stroke: 1000 mm Z axis stroke: 1000 mm X/Y/Z fast forward speed: 15000 mm/min X/Y/Z working speed: 5000 mm/min Spindle: BT 50 Spindle rotation speed: 20 - 4500 rpm (3-speed gearbox) Motor power: 18.5 kW Tool magazine: 90 positions Maximum tool length: 550 mm Maximum tool diameter: 250 mm Maximum tool weight: 5 kg 4th axis: 360000° CNC: FANUC series 18-M HEIDEN...

Listing

Olching

18503 km

3-Axis machining centre

Hurco BX 50i

2018

as good as new (ex-display)

Call

Spindle Speed :18,000 rpm Power: 35 kW Bdk3x9dc Torque :119 Nm Taper :HSK-A63 Working area Movement X: 1,350 mm Movement Y :950 mm Movement Z :600 mm In general Control: Max 5 Toolmagazin: 50 stations Clamping surface: 1,500 x 960 mm Table loading (max.): 2,500 kg Rapid traverse in X/Y/Z-Axis: 36 m/min Linear scale :direct Equipment Chip conveyor Coolant supply Linear scale high pressure coolant

Listing

Staufenberg

18414 km

CNC machining center

WEEKE BO5 OPTIMAT

1993

excellent (used)

Call

CNC machining center make WEEKE type BO5 OPTIMAT year of manufacture 1993 Technical data: working length 2500 mm working width 650 mm Working height 50 mm Vertical drilling gear with 10 individually callable drilling spindles drilling dia. 35 mm top milling unit 2,5 kW top milling unit speed up to 18000 rpm Grooving unit 1 kW grooving saw 1 kW outer dimensions LxWxH 4000 x 1600 x 2000 mm weight approx. 2 t with - CNC control HOMATIC with Graphic CAD CAM system - 6 pneumatically clamped workpi...

Listing

Yenidoğan, Sahabeler Cd No:20 D:20, 34040 Bayrampaşa/İstanbul, Turkey

17195 km

CNC STENBERGS Horizontal Milling Machine

CNC Stenbergs BTF-130.R22

2002

good condition (used)

Call

CNC Horizontal Milling Machine Double Table Type:BTF-130.R22 Table:2500x3000.mm Control:Toshiba/Tosnuc Tools:60 BT:50 Spindle:130.mm Ip8q3kww0 RPM:3000

Listing

Chartres

19049 km

Laser TRUMPF TRUMATIC L2520

Mazak FH 10800

2006

excellent (used)

Call

Table dimensions: 1000x1000 Stroke X: 1700 mm Stroke Y: 1400 mm Stroke Z: 1400 mm Tool magazine: 120 Spindle speed: 7000 rpm Tc98djyf Spindle cone: CAT 50 Maximum weight on pallet: 3000 kgs 2 pallets Indexing 360,000 positions Watering centre 70 Bars Renishaw Conveyor

Listing

Saint-Ouen-l'Aumône

18968 km

TRUMPF L 2530 - 2,4 KW

1999

good (used)

€25,000

hORIZONTAL MACHINE CENTER

Call

TRUMPF TC L2520- 2.4 KW Year 10/1999 Format 2500 x 1200 mm Siemens 840D control Rb3fj 5” and 7.5 cutting head 2.4 KW resonator Very clean and well maintained machine.

Listing

3840-182, Portugal

19732 km

Doerries Scharmann ECOCUT 2Z TDV4

1993

not inspected (used)

€90,000

Rambaudi RAMMATIC 1400 X:4500mm/ iTNC540

Call

Machine with low hours, customer never worked with it because don't have space to install the machine. Low working hours. ᐸ1500 hours . Can be inspected, after arrangment. Eynjdpun Machine prepared for transport. DÖRRIES SCHARMANN ECOCUT 2Z - TDV4 CNC TABLE TYPE HORIZONTAL BORING MILL, Siemens X/Y/Z/W = 2500/2000/2000/700mm, 133-Station Tool Changer, Tables 1600 x 2000mm x 20T (3x) - (360,000 deg), Spindle Taper Capto C8, Spindle Speeds 12-3000 RPM, Rotary Table - (C-Axis) 1800mm x 5,500 kg. ( ...

Listing

Gießen

18524 km

Rambaudi RAMMATIC 1400

2012

excellent (used)

Call

Rambaudi Rammatic 14000 Heidenhain iTNC 540 X: 4500mm Y: 1400mm Z: 1000mm swivel head table load 15to. Year: 1992 / Overhauled in 2003 / General overhaul 2012 Technical documents, wiring diagrams documentation fully available. Weietre data and videos of the machine are available on request. The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test protocol, which is part of our service. C7n2osb The MMV Group offers you especially for our products the suitab...

Listing

Uttendorf

18385 km

CNC machining center

AXA VSC 1 – 3500 M

2001

excellent (used)

€12,000